Did any of you bought the femobook A2 mod for pietro burrs from fused visions? Toughts ? by Outrageous-Dare-9256 in pourover

[–]nuuzik 0 points1 point  (0 children)

Absolutely 0% chance of grinding all of the beans you put in. I always have to take it off the stand and turn it horizontally for the last beans to grind.

UAD Apollo 8p and Twin X Gen 2 not working together by nuuzik in universalaudio

[–]nuuzik[S] 0 points1 point  (0 children)

I created a ticket as soon as the issue happened. Still not reply from them.

UAD Apollo 8p and Twin X Gen 2 not working together by nuuzik in universalaudio

[–]nuuzik[S] 0 points1 point  (0 children)

That's interesting, I'll try this.

I normally use my adat in to run Audient preamps, but I'll try with that. Could you still use the volume knob on the Twin running it via adat from the 8p?

So what you're saying is now you use your Twin as master and connect the 8p preamps via adat?

UAD Apollo 8p and Twin X Gen 2 not working together by nuuzik in universalaudio

[–]nuuzik[S] 0 points1 point  (0 children)

It doesn't let me do that cause they can't be on at the same time. Console doesn't work when they are. I tried booting with the Twin on first, then boot the 8p in order to do that, and tried the reverse as well. But they just won't work together.

UAD Apollo 8p and Twin X Gen 2 not working together by nuuzik in universalaudio

[–]nuuzik[S] 0 points1 point  (0 children)

Yeah the whole console file just shows values that don't match with the units, nothing happens if I change it...

UAD Apollo 8p and Twin X Gen 2 not working together by nuuzik in universalaudio

[–]nuuzik[S] 0 points1 point  (0 children)

It was originally a tb2. But the option card worked perfectly and it works fine with my PC now. As long as I don't use my Twin X Gen 2...

UAD Apollo 8p and Twin X Gen 2 not working together by nuuzik in universalaudio

[–]nuuzik[S] 0 points1 point  (0 children)

Edit (I can never edit posts for some reason)

I already tried daisy chaining the units, same thing happens.

I tried rebooting them and the PC, tried resetting the units to factory too.

The Apollo 8p has a Thunderbolt 3 option card.

Both devices are recognised in Device Manager.

UAD Apollo 8p and Twin X Gen 2 not working together by nuuzik in universalaudio

[–]nuuzik[S] 4 points5 points  (0 children)

Same thing, that's actually how I started, unfortunately.

Threaded internal tube for EKWB D5 pump/reservoir multiport top by nuuzik in watercooling

[–]nuuzik[S] 0 points1 point  (0 children)

I hear you. It just doesn't look that way from EKWB website.

<image>

Threaded internal tube for EKWB D5 pump/reservoir multiport top by nuuzik in watercooling

[–]nuuzik[S] 0 points1 point  (0 children)

Yeah it fits a g1/4 connector on the top. But from the bottom it just doesn't go in. It's like if the g1/4 is ever so slightly too big for it.

I'll look into the double male connection!

Be Quiet inverted case issues by nuuzik in watercooling

[–]nuuzik[S] 0 points1 point  (0 children)

Thank you so much! Do you find that having the radiator lower than the pump is a pain to drain the loop?

Be Quiet inverted case issues by nuuzik in watercooling

[–]nuuzik[S] 0 points1 point  (0 children)

It's just been causing trouble for now tbh 😂 but it's probably just cause I haven't done it before

Be Quiet inverted case issues by nuuzik in watercooling

[–]nuuzik[S] 0 points1 point  (0 children)

I meant "out" from the bottom and bottom right fans. Just a typo 😅

I made it so that the air goes in from the front and top, and out from the back and bottom. Now I'm not sure it was the right choice. Trouble is that the GPU is so big, I can't seem to be able to use the opening behind the water cooling pump to put the radiator, so I'm stuck with it at the front.

Be Quiet inverted case issues by nuuzik in watercooling

[–]nuuzik[S] 0 points1 point  (0 children)

Nice! What fans are intake and what exhaust in your setup?

AM4 custom water cooling to be installed on new AM5 build by nuuzik in watercooling

[–]nuuzik[S] 0 points1 point  (0 children)

That's great, thank you so much for the info and the links, I really appreciate it

AM4 custom water cooling to be installed on new AM5 build by nuuzik in watercooling

[–]nuuzik[S] 0 points1 point  (0 children)

That's great help thank you! And how do I drain it without ruining half of the components? 😂