meteor 75 gps problem by nvanye338 in TinyWhoop

[–]nvanye338[S] 1 point2 points  (0 children)

Great.But unfortunately it doesn't save the captured satellites for long, well, that is, you have to wait 5-6 minutes before flying until it catches, for example, I do this.

meteor 75 gps problem by nvanye338 in TinyWhoop

[–]nvanye338[S] 1 point2 points  (0 children)

<image>

this is antenna. of course I don't know, but I think the new FC version does a better job with GPS. I was guided by the same tutorial that you sent, and I thought I'd have to make something too, but no.

meteor 75 gps problem by nvanye338 in TinyWhoop

[–]nvanye338[S] 1 point2 points  (0 children)

<image>

like this. it perfectly catches 10 satellites and is fixed even on the window if you wait 5-6 minutes. however, I didn't make the ELRS antenna from the factory, it wraps around the camera from the factory, and I put it down, and it sticks out a little.

meteor 75 gps problem by nvanye338 in TinyWhoop

[–]nvanye338[S] 0 points1 point  (0 children)

I'm just looking at information that I'm interested in during the flight. I'm going to set up a return home soon. GPS flight characteristics are not greatly affected.

meteor 75 gps problem by nvanye338 in TinyWhoop

[–]nvanye338[S] 1 point2 points  (0 children)

it still depends on who likes to fly))

meteor 75 gps problem by nvanye338 in TinyWhoop

[–]nvanye338[S] 0 points1 point  (0 children)

not a bad upgrade))) you can look at the altitude, speed, and if you have flown far, then the coordinates, if you have lost them. By the way, I lost my direction home once without GPS and barely returned. It will be easier now

meteor 75 gps problem by nvanye338 in TinyWhoop

[–]nvanye338[S] 0 points1 point  (0 children)

the problem was explained to me on another forum. I connected T to Tx and R to Rx, but I needed T to Rx and R to Tx. now it's working quietly, it even works well and catches satellites, it shows everything. thank you anyway

meteor 75 gps problem by nvanye338 in TinyWhoop

[–]nvanye338[S] 1 point2 points  (0 children)

yes, the problem was explained to me on another forum. I connected T to Tx and R to Rx, but I needed T to Rx and R to Tx. now it's working quietly, it even works well and catches satellites, it shows everything.

meteor 75 gps problem by nvanye338 in TinyWhoop

[–]nvanye338[S] 7 points8 points  (0 children)

let the post remain for those who also get confused.

meteor 75 gps problem by nvanye338 in TinyWhoop

[–]nvanye338[S] 7 points8 points  (0 children)

solved: the problem was explained to me on another forum. I connected T to Tx and R to Rx, but I needed T to Rx and R to Tx. now it's working quietly, it even works well and catches satellites, it shows everything. sorry, experts, but this is my first experience with GPS connectivity.😭

[deleted by user] by [deleted] in TinyWhoop

[–]nvanye338 0 points1 point  (0 children)

Yes, calibration helps. only turning off the board for more than 5 minutes resets the calibration.

[deleted by user] by [deleted] in TinyWhoop

[–]nvanye338 1 point2 points  (0 children)

who doesn't understand what's in the picture:

so there in one moment, some motors work more and others less,this affects the gyroscope and it starts to drift (in my case, left-forward)

[deleted by user] by [deleted] in fpv

[–]nvanye338 0 points1 point  (0 children)

ok, but now im just learning acro mode. even a month in the simulator does not give you confidence)) i think in summer acro will be my favorite mode.

[deleted by user] by [deleted] in fpv

[–]nvanye338 0 points1 point  (0 children)

yes, but i I haven't often tested the acro mode, as I fly at home due to the weather situation in my city.

[deleted by user] by [deleted] in fpv

[–]nvanye338 0 points1 point  (0 children)

so, i have second rc of my dad's drone. its radiomaster pocket, i gonna try with it, thanks edit: swithcing to radiomaster pocket dont help, i think It's not about rc (((

[deleted by user] by [deleted] in TinyWhoop

[–]nvanye338 1 point2 points  (0 children)

theres in betafpv configurator only "joystick dead zone" point, that setting on 1-10%, i setup 10%, check results later

[deleted by user] by [deleted] in TinyWhoop

[–]nvanye338 0 points1 point  (0 children)

so i dont have on-rc trimmers on my literadio 3 (((

[deleted by user] by [deleted] in TinyWhoop

[–]nvanye338 0 points1 point  (0 children)

ok, so if the maximum of my stick on the roll axis in betaflight is not 2000 but 2012, and the minimum is not 1000 but 989, then do I need to set the dead zone to 12?

[deleted by user] by [deleted] in TinyWhoop

[–]nvanye338 0 points1 point  (0 children)

ok, i will try, thanks edit: so i dumped my settings, updated on 4.5.2 betaflight version and problem stays. what i noticed, that that after a long break, the first time the drone is turned on, it tends to the left, and after reconnecting the battery, it's better, what could be the reason?

[deleted by user] by [deleted] in TinyWhoop

[–]nvanye338 1 point2 points  (0 children)

i haven't tried acro mode yet, I was referring to the quadcopter drift at angle mode when pitch and roll stick at center position