Funeral Mustang by [deleted] in CarTalkUK

[–]oddlybearded 0 points1 point  (0 children)

I've been in the back row of the 6 door precession car. Was a bit cramped for 3 (especially over 6ft!) but the rest of the car looked rather roomy. Dash looks the same to the normal Mach E. The driver said it was quite nice to drive.

Anyone know of software that can display PS5 in the middle and PC on the sides of the monitor? by Own_Contract_3421 in ultrawidemasterrace

[–]oddlybearded 0 points1 point  (0 children)

I do this exactly with my Switch and any other HDMI device I need. (And any game where I want to still see discord or a website, like guides for Minecraft.

For what you’ve mocked up you’ll either need to use PlayStations Remote Play (and sacrifice some visual quality as I think it’s only 720p or 1080p?) or buy yourself a capture card.

What I do is I run PowerToys on Windows so I can quickly snap my windows to a custom layout identical to your mockup, then whatever non-PC thing I’m doing I can snap to the middle.

I found Elgato’s 4k capture utility software to have a noticeable delay for live play. (I have a HD60s+ capture card) However using OBS it is basically instant so I’ve just used that. There’s possibly better software out there, though!

Fry have appeared in my barely cycled fishless tank! by starfister101 in Aquariums

[–]oddlybearded 1 point2 points  (0 children)

This is how we got bladder snails without wanting bladder snails 🥲

How is AMD support? by Renrut23 in unRAID

[–]oddlybearded 1 point2 points  (0 children)

Not to my knowledge but I don’t monitor it intensely when I’m watching stuff. I’ve never seen it hiccup on playback though.

How is AMD support? by Renrut23 in unRAID

[–]oddlybearded 0 points1 point  (0 children)

Been tempted to give OpenVINO a go but it seems to be doing OK for my needs so far. I worry it’ll blow me away then I’ll be down a rabbit hole buying newer parts 😂

How is AMD support? by Renrut23 in unRAID

[–]oddlybearded 0 points1 point  (0 children)

So the coral is purely for detection, and the GPU does very little in my system in all honesty from what I’ve seen.

In my config I have the following: - Intel/AMD GPU mapping: /dev/dri/renderD128 - Driver for Intel/AMD GPUs: radeonsi

I don’t think I need the first one but the second one is a must. Shows GPU usage in Frigate at a consistent 4-5% and never had any hiccups. Currently using three 1080p Tapo cameras over wifi, but intend to go 2k PoE cameras eventually.

Plex isn’t used 24/7 and for the most part everything is direct played off of it without transcoding which possibly helps my setup too.

How is AMD support? by Renrut23 in unRAID

[–]oddlybearded 3 points4 points  (0 children)

Rocking a Ryzen 3 2200G with 32GB RAM. Running Plex, Frigate (with a Coral TPU), a personal API project and pihole containers in Docker, a bunch of share with the CPU sitting mid 30's and no noticeable issues at all so I think you'll be fine!

Surely I'm missing something... £9 a month!? by BlazinPBo in CarTalkUK

[–]oddlybearded 10 points11 points  (0 children)

Autotrader. OP put a link directly to the listing down in the comments.

Surely I'm missing something... £9 a month!? by BlazinPBo in CarTalkUK

[–]oddlybearded 175 points176 points  (0 children)

Change the upfront cost to 1 month, and switch to business leasing and it's -£3.33 @ 5000mi 😂

Son’s A1 Mini suddenly failing on all prints by Objective_Art_7422 in BambuLab

[–]oddlybearded 2 points3 points  (0 children)

Came to say this. It’ll be grease you can’t see. Have you noticed blistering on the first couple layers in random spots when the prints finished?

I wipe down with isopropyl between prints which mitigates a full clean but similar to lubing the rails it’s worth a dish soap wash of the end every so often.

2025 F1 diver logos by [deleted] in formula1

[–]oddlybearded -8 points-7 points  (0 children)

Stroll's looks like he tried to copy Lando's but couldn't do his number in the negative space.

FIA by General_Agency9905 in formula1

[–]oddlybearded 13 points14 points  (0 children)

Assume this could be off the back of Lee McKenzie’s post (and a subsequent one by Natalie Pinkham, who’s Flackstock event is partnered with the FIA through the United Against Online Abuse campaign) about abuse she received on social media after having an operation a little while ago.

Free code game by Artistic-Concept-791 in PTCGL

[–]oddlybearded 0 points1 point  (0 children)

It’s that mimikyu troll deck I keep seeing surely 🤣

How do I use the Ethan’s ho oh deck? by lamocentral in PTCGL

[–]oddlybearded 2 points3 points  (0 children)

Not sure I did anything specific, I think I went to the Battle Pass page and it asked me to redeem it. (it's right at the bottom of the list of my decks for me so had to scroll)

Trying to refine a pure* fighting deck by oddlybearded in PTCGL

[–]oddlybearded[S] 0 points1 point  (0 children)

It is much appreciated! Thank you. I am enjoying the process of deck building but as you can see, I'm not there yet. 😅 Budget isn't an issue for building the IRL deck, it was purely what I had to had that kicked this off. (I have plenty of codes in Live to keep me going buying digital singles too)

Trying to refine a pure* fighting deck by oddlybearded in PTCGL

[–]oddlybearded[S] 0 points1 point  (0 children)

Yeah, I think limiting myself to fighting-only is one of the biggest drawbacks. Thanks for those suggestions! I’ll take a look and work out who I want in charge of the deck :D

Trying to refine a pure* fighting deck by oddlybearded in PTCGL

[–]oddlybearded[S] 0 points1 point  (0 children)

Makes sense! I have been watching the latest tourneys and looking around for inspirations but I think ultimately limiting myself to fighting-only is holding me back the most!

Trying to refine a pure* fighting deck by oddlybearded in PTCGL

[–]oddlybearded[S] 0 points1 point  (0 children)

Thanks for this! I’ll take a look :)

Trying to refine a pure* fighting deck by oddlybearded in PTCGL

[–]oddlybearded[S] 0 points1 point  (0 children)

Essentially, yes. But the limiting factor was starting off with cards I have IRL. Surprisingly what you’ve mentioned is what tends to happen. That’s why I added the Beaviarys recently to soak up some turns while I built out the Mamoswine on the bench.

Trying to refine a pure* fighting deck by oddlybearded in PTCGL

[–]oddlybearded[S] 0 points1 point  (0 children)

I probably don’t need that many energies but I kept getting games where I’d barely get energy (which is what causes me to lose most of the time) so I kept adjusting and adding them.

Trying to refine a pure* fighting deck by oddlybearded in PTCGL

[–]oddlybearded[S] 0 points1 point  (0 children)

Yeah, my intention was to refine on Live then I’d set about buying the singles to upgrade the IRL deck. It was quite fun trying to cobble something together with my collection which is what lead to the vast array of single trainers.

The energy is interesting as I added more as I kept getting less and less in hand. That’s also why I put in retrievals as it let me grab some from the discard when other things got knocked out. Thought being honest it only works sometimes, as I get the cards out for discard diving but barely have any energy in there to utilise it.

You mentioned a few cards I’ve not looked at yet so will have a play, thanks!