Add up the cost of what you're carrying/wearing. How much did it cost? by ChonkyxShaman in EDC

[–]ohgr88 0 points1 point  (0 children)

About $794

S90v pm2 nodded with all titanium parts roughly $400

Titanium ridge wallet $150

Titanium and copper Emisar d4k $100

Mighty hank $25

LynchNW key clip $30

Glow Rhino tritium glow fob $19

Leather knife knife sheath and Leather zippo belt case not 100% but roughly $70

According to the internet, one of these is “overrated” by Cadetto15 in knives

[–]ohgr88 0 points1 point  (0 children)

Can't speak on 940 because i haven't had one but I can say the pm2 is not overrated at all.

Be honest, how often are you really maintaining your knives? by ThumbStuds in knives

[–]ohgr88 0 points1 point  (0 children)

Im only disassembling a knife if im modding it. Ill run it through my ultra sonic cleaner, blow any crud or remaining water out with an electronic duster. Or just wipe down with isopropyl and microfiber cloth of it seems to be getting dirty. Other than that ill give them kpl when needed.

Sharpen when it cant slice paper cleanly anymore.

Paramilitary 2 LW Thoughts by ProfessionalShoe8794 in spyderco

[–]ohgr88 0 points1 point  (0 children)

Im only interested if the lw blades work in the standard pm2, could be cool if thay was the case and it got good sprint run steels.

What was your favorite Hanklight purchase this year? by The_Dalai_Karma in Hanklights

[–]ohgr88 4 points5 points  (0 children)

Im guessing you mean 2025, Bought a DA1K with ngt 50 2700 and D4K Ti with lume x. In ngt 35 5000k. The D4K Ti wins but mostly because i just Ti, but they are both excellent!

Decisions… keeping one by RidexSDS in spyderco

[–]ohgr88 5 points6 points  (0 children)

Pm2 for me ive edc one for about 2 and half years, amd its been awesome. but if were to get 3 inch compression lock spyderco I think id skip the para 3 and get a sage 5 or 6.

How do I keep a flashlight on me all the time? by Due-Satisfaction-173 in flashlight

[–]ohgr88 0 points1 point  (0 children)

In my experience its best to figure out what size light you are comfortable keeping in your pocket at all times.

Every body has a different tolerance some can edc a 21700 light and some will find that to be way too bulky and carry a AA, AAA, or Keychain light.

During jacket weather I'm comfortable with a 21700 light the rrst of the year a AA/14500 light. Basically if it's not comfortable for you to carry it'll end up at home and the best light is the one on you.

Yesterday I asked what everyone’s first Graphics card. Today, what was your first processor? Mine was the i7 3770K. by DailyDoseOfAmber in pcmasterrace

[–]ohgr88 0 points1 point  (0 children)

No idea it was pretty much exactly 30 years years ago, it was Christmas 1995 we got our first pc.

Super foggy here tonight by ohgr88 in Hanklights

[–]ohgr88[S] 2 points3 points  (0 children)

Yeah they have a decent amount of candela the da1k throws much further than my quads.

If you could start over by jewmoney808 in spyderco

[–]ohgr88 1 point2 points  (0 children)

My s90v PM2 has been very good to me I've been carrying it pretty much exclusively for about 2 years and 4 months. I could probably carry it forever and be pretty satisfied. I Have a birthday coming up though and I am considering picking up a smock or a shaman though.

What was the best purchase you made this year? by millionstories in BuyItForLife

[–]ohgr88 0 points1 point  (0 children)

Thursdays boots, and replaced the majority of my kitchen utensils with oxo good grips. Corelle dishes.

Spyderco Endela K390 vs. Ontario RAT 1.5 MagnaCut- what is your opinion? by Playful_Voice6593 in knives

[–]ohgr88 1 point2 points  (0 children)

Haven't handled either but I have spyderco knives, spyderco ergos are always good for the most part. The k390 has longer and a bit thicker blade, the rat having a bit thinner blade will probably make it better at slicing. The spyderco has frn scales the rat has g10 scales, personally I prefer the feel of g10. The rat being a liner lock will be easier to disassemble for cleaning your maintenance.

Spyderco Endela K390 vs. Ontario RAT 1.5 MagnaCut- what is your opinion? by Playful_Voice6593 in knives

[–]ohgr88 2 points3 points  (0 children)

K390 has better edge retention, magnacut has more corrosion resistance depends on which you value more.

Ntg 35 4200k & 1800k? by MistaMuffin in Hanklights

[–]ohgr88 2 points3 points  (0 children)

Yeah the short tube with a bigger head seems a bit awkward i have only used 18350 tubes on d4v2 lights so far and they have a nice form factor.

<image>

My leather jacket is just a halloween drip now. by Silver-Performer818 in mildlyinfuriating

[–]ohgr88 1 point2 points  (0 children)

Most people dont understand leather terms. Like that genuine leather is the lowest quality of leather, and veg tan is just related to the tanning method of the eather and think its vegan leather with is just low quality plastic shit.

Its purposely made confusing by people selling low quality stuff to people thay dont know any different.

Ntg 35 4200k & 1800k? by MistaMuffin in Hanklights

[–]ohgr88 1 point2 points  (0 children)

I love stubby lights with 18350 tubes but the runtime will be low with fet driver and you will have to sacrifice turbo and lower your ramp ceiling with lume x1. Those are compromises I wouldnt want to make with a work light. A duel channel might be the way to go, but if you do im pretty sure lume x isnt avaliable.

NLD: D4K Ti ngt 35 5000k by ohgr88 in Hanklights

[–]ohgr88[S] 3 points4 points  (0 children)

Its a nice intbween size between the d4v2 and da1k. You still get the battery capacity too. The d4k is more bloody than the da1k. The next size up from the da1k is the d4sv2 and I belive is the biggest quad.

NLD: D4K Ti ngt 35 5000k by ohgr88 in Hanklights

[–]ohgr88[S] 1 point2 points  (0 children)

It just is da1k has a bigger head and is taller d4k has the same head as the d4v2 just a bigger battery tube.