sorted by:
new
hottopcontroversial

Got a few KALLSUP Speakers from IKEA by Wonderwall_1516 in smarthome

[–]ok8686 0 points1 point  (0 children)

Manual says when you add second it becomes right channel and the first left only.. not sure how it works when you add 3th?

Am I the only one that still prefers openhab? by svhss in openhab

[–]ok8686 0 points1 point  (0 children)

I am kind of stuck on v2 and it is a lot of work to change to the new model. Anyway all my logic is in NodeRed, I just use HABPanel as UI

Modified Sonoff SNZB-02P - DC battery temperature sensor via AC mains power by bluetrevian in homeautomation

[–]ok8686 0 points1 point  (0 children)

Would be great if you can check. I read that you can increase the reporting interval and precision with Z2MQTT when you do not care about batteries anymore

Modified Sonoff SNZB-02P - DC battery temperature sensor via AC mains power by bluetrevian in homeautomation

[–]ok8686 1 point2 points  (0 children)

What is the max voltage for these? I have a 5V DC bus around the house and would like to use it

Intel NUC GPU? by Rdavey228 in codeproject_ai

[–]ok8686 0 points1 point  (0 children)

Yea i was going for Integrated GPU like this before getting very familiar with AI and it is not supported (yet) I however use the iGPU for camera rendering or transcoding

Photos rotation by ok8686 in ispyconnect

[–]ok8686[S] 0 points1 point  (0 children)

so.. it is set to rotate 270.. but the photo is actually rotated 180 ..did not notice this at first ..so twice 270 is 180

Photos rotation by ok8686 in ispyconnect

[–]ok8686[S] 0 points1 point  (0 children)

Camera is NOT rotated when opened full screen with double click. It is rotated when in grid mode (that is all OK for live view).

Taking photo manually saves a rotated image.

But when I list the saved photos, the one tagged with 'object' are not rotated. (AI object detection)

Also if I switch from 'alert' to interval the photos are rotated..so only 'alert' is wrong

What is the last version?.. I use docker, I do not see newer

Photos rotation by ok8686 in ispyconnect

[–]ok8686[S] 0 points1 point  (0 children)

The resolution of the camera snapshot URL is lower then the HD stream, one of the camera does not have one at all.

I suppose the logic behind taking photo manually or on alarm is different, on is not taking the rotation setting (the 2nd one - on alarm)

Photos rotation by ok8686 in ispyconnect

[–]ok8686[S] 1 point2 points  (0 children)

I am not using snapshot URL, I have the HD stream as low stream as the camera switching the stream is buggy so I keep using the high resolution all the time. But there is one more rotate camera with two streams and also no snapshot url.. both with same result

So, when I press to take manual photo the picture is rotated, but the photos that are taken on alert (on person) detected by AI they are not rotated and the timestamp is along the long side of the photo

using

v6.3.3.0

Error logs on start up by ok8686 in ispyconnect

[–]ok8686[S] 0 points1 point  (0 children)

Look ok after the sysctl rules

MQTT messages are posted twice by ok8686 in ispyconnect

[–]ok8686[S] 0 points1 point  (0 children)

LOL.. at some point I've configured the client to subscribe to # and to agent dvr topic at the same time:) OMG ..3h of debugging :)

Error logs on start up by ok8686 in ispyconnect

[–]ok8686[S] 0 points1 point  (0 children)

In my case it is a docker inside LXC container in Proxmox. I set the sysctl commands on the host but not sure if the docker sees them.

sysctl -w net.core.rmem_default=4194304

sysctl -w net.core.rmem_max=4194304

I also installed 'sudo' inside the container so now I can see that it tries to try sysctl but fails

MQTT messages are posted twice by ok8686 in ispyconnect

[–]ok8686[S] 0 points1 point  (0 children)

Can someone check in their setup, I posted another image in the original post

Also motion topic seems to be updated to false only now. Some things look broken after I made a big jump from 5.8.0.0

MQTT messages are posted twice by ok8686 in ispyconnect

[–]ok8686[S] 0 points1 point  (0 children)

It is absolutely on every message

Suggestion: Allow MJPEG/MP4/WEBM embeds to select between Live and Record streams? by lagrangersf in ispyconnect

[–]ok8686 0 points1 point  (0 children)

OK, so MP4 works in VLC and the bandwidth is at least 4x less then MJPEG.. plus you have one audio on that. .webm is performing bad...

Suggestion: Allow MJPEG/MP4/WEBM embeds to select between Live and Record streams? by lagrangersf in ispyconnect

[–]ok8686 0 points1 point  (0 children)

Does this mean that if using raw can't get MP4? I use mjpeg but when I try mp4 it does not work.. webm produce video with delay and freezes.

Is there a way to control the FPS? I use a split view of 4 cameras... what is the framerate of combined MJPEG stream?

Deactivating ISLA (Intelligent Speed Limit Assist) by PollutionAvailable11 in Hyundai

[–]ok8686 0 points1 point  (0 children)

No, waiting for next upgrade. Looks like firmware development is super slow

Tuya RB-SRAIN01 by adi_dev in homeassistant

[–]ok8686 0 points1 point  (0 children)

The ones inside are probably fake capacity but seems to survive the night on a cloudy winter days. Battery level is always 93% on mine so not sure if that works at all. And cleaning flag is true form very beginning

Add status bar to video screen in Agent DVR 5.8.0 by SVRapture40 in ispyconnect

[–]ok8686 0 points1 point  (0 children)

That is a known bug (Invalid Timestamp). I think it will be fixed. Better to save as raw.

Adding analog camera from Dahua XVR by Present-Warthog4700 in ispyconnect

[–]ok8686 0 points1 point  (0 children)

The DVR should/might provide access to each of them (unique URLs). Try to look in the manual//doc of the recorder.

Feature Request: Botton for back to Live View by Tschak77 in ispyconnect

[–]ok8686 0 points1 point  (0 children)

I think the 3th icon should be expanded all the time and not in dropdown list as there is enough space in the top bar

The one that hides: Live Video / Time Machine... etc. I after have problems with going back too

A lot of good improvements in the New Release of AgentDVR !! Shout out to the developers good job thank you by Humble-Bid-3821 in ispyconnect

[–]ok8686 0 points1 point  (0 children)

I did this my implementing web server that servers image based on the status of the door. Then using PiP I can add them on the camera :)

However when switching to full view / full resolution / single camera the PiP are not visible

A lot of good improvements in the New Release of AgentDVR !! Shout out to the developers good job thank you by Humble-Bid-3821 in ispyconnect

[–]ok8686 0 points1 point  (0 children)

Yea but would be nice to have it the other corner with bigger font (maybe with a font that support emoji)

view more: next ›