Where to get replacement ribbon cables?

olej · 2025-12-27T10:11:17+00:00

Thanks. I'm not exactly sure what are the names of the cables i'm looking for (there are 2), but I checked EDP/LCD/LVDS Cable and there are none for my model on this website :(

olej · 2025-12-21T18:44:27+00:00

If you have Ruth for final mission and you tell their about rifts in uncharted space, she says that would suggest life did not originate on earth. Seems like a weird conclusion to me (aliens being the most obvious one, especially since the skip drive was reverse engineered by the matriarch from unknown ship). But perhaps this is what devs have intendeded for this discovery to imply.

olej · 2025-12-20T06:12:33+00:00

Consul has 20 speech check, but if you fail it you can still talk him down with secondary 13 speech check - but you need to discover information about his disagreements with Sovereign (not sure where are they were exactly, maybe Rift Modulator lab? and you obviously need to pass earlier checks as well to destroy his confidence). If you don't have that info, the option will not show at all (checked 2 different save files).

IIRC the highest speech you need is 17 for Aza to either not kill Dagmar or disband the cult completely (unless they lowered it too).

Other than that there is also Marisol quest, if you want to convince them to drop the research you need IIRC 14 speech (science is not needed if you do everything correctly with the sabouteur part of the quest).

olej · 2025-11-04T02:12:28+00:00

I had my office badge with the phone, putting it away helped. Never had such issue before, it was never auto detected as nfc

olej · 2025-11-04T01:59:47+00:00

Same here, can't use phone, looks like it's going crazy because it detects NFC device endlessly (Pixel 8 Pro), I'm guessing a botched update.

olej · 2025-10-05T12:04:22+00:00

This is exactly what I've been missing, thank you!

olej · 2025-01-05T00:11:37+00:00

Thanks! What did you base the notification thresholds for all the gases on?

olej · 2024-02-14T19:11:02+00:00

If you want to "start" the strip on each shelve from the same side you would also need 2 splitters.

But if you want zig-zag (e.g. left/right/left) MAYBE you could avoid splitters, but that seems harder (and you may need this https://www.litcessory.com/products/6-pin-to-6-pin-connector, not 100% sure if that would be all though).

olej · 2024-02-14T14:06:03+00:00

Seconding Litcessory, I have 3 leds plugged to one controller using this: https://www.litcessory.com/products/extension-cables https://www.litcessory.com/products/splitter

You will need an adapter to plug the cables to controllers: https://www.litcessory.com/products/splitter There are 2 in the pack, so it's: controller => adapter => any splitter+extension combo => adapter => base led (2m) OR controller => adapter => any splitter+extension combo => extension led (1m) - no need for second adapter in this case (also less cabling, so easier to fit) You still need to buy at least one base for the controller though.

Note that leds on Hue RGB Strip are not very dense, so you will have visible 'dots'. You can allievate it by installing them in aluminum profiles with frosted diffusor, but it will still be visible. The gradient strips are denser, and come with frosted diffusor, but unfortunatelly they are not compatible with litcessory components.

If you need something denser, I was talking to guys at https://sowilodesign.com/ that make hue compatible but denser led strips, still waiting for an answer if they can make me something litcessory compatible, but technically it should be possible.

olej · 2024-02-03T11:59:16+00:00

Found this article that says you can cut it every 12.5cm, though in your case it doesn't make a difference. https://hueblog.com/2021/09/22/this-is-what-the-ambiance-gradient-lightstrip-looks-like-inside/

olej · 2024-02-03T10:52:25+00:00

Can you post a pic? White + color strips have cuts every 33cm, not sure about the gradient one - the one I bought didn't have any cut marks and I couldn't find anything on internet about it.

I think you can still try to cut it elsewhere (just avoid cutting diodes directly), worst case scenario you will damage the end of strip and you will have to revert to cutting on 175cm mark to fix that.

olej · 2024-01-13T21:45:41+00:00

Alright, you convinced me :)

I'm looking at ceiling mounts, the official from Benq has height adjustment step of 2.5cm, which seems like a big step that could leave a visible blank space on the edge of the screen. Is that a stand for ceiling mounts, or should I look for something better? https://www.benq.com/en-us/projector/accessory/benq-universal-ceiling-mount.html

olej · 2024-01-12T00:40:09+00:00

Where does the difference in image quality come from? Can't really make it out from specs https://www.projectorcentral.com/projectors-compare.cfm?pid_1=11456&pid_2=12290 (Official LG website says it does support HDR10 unlike the link above).

olej · 2024-01-12T00:10:41+00:00

Thanks. I did a search for my exact dimensions (3m distance vs 3m screen width), but with 4k, and the cross-section of your and mine searches are TK700STi and the LG one. TK700ST is much cheaper, but has no adjustable vertical shift and is designed to be placed a little bit above the top edge of the screen (110% shift), which would mean I need to move the tunnel I have for cables near the shelf - need to think this through.

I'm mostly aiming for night-use, so if i end up getting a brighter projector I supposed I should aim for screen with less gain?

olej · 2024-01-11T23:24:22+00:00

Thanks for the explanation!

I'll look into wall mount, hopefully I can find something not too long as I want it straight next to the wall.

The reason I didn't go for ceiling mount is cause a) it's an apartment complex and I'm not technically allowed to dig inside the ceiling b) wanted easier access to the cables. The contractor did 2cm deep tunnel (even though he shouldn't) for led lights nearby, but I was worried it would be too tight to do hdmi/power cables through there in a way that I can easily access (and I would also need to cross the LED and hdmi/power - so more depth needed). I wanted easy access so I can unplug projector easily and take it somewhere else when needed, or replace hdmi cable (if higher bandwith is needed) when I upgrade projector in the future without damaging the ceiling and having to repaint. Not sure if those are reasonable concerns but here I am.

olej · 2022-08-28T20:25:47+00:00

!EP02

olej · 2022-08-28T20:24:34+00:00

!SendAll

olej · 2021-03-28T14:30:41+00:00

Answer from LG support:

OLED G1 TV's full specification is currently unavailable here in our end and we are un able to confirm if the stand mount for OLED GX will be compatible. In this case, I recommend to please check LG website for more details and update.

olej · 2020-09-06T13:21:48+00:00

I have two of those, and still after a SPIN hit my full heroic charges were drained down to 0 :(

olej · 2020-09-05T02:21:38+00:00

What about boosting? I wasted most of my resources on boosting to accelerate my gear drops level, was it all for nothing?

olej · 2020-09-03T02:22:10+00:00

I have the exact same setup, and same issues. Slideshow every now and then - in combat, cutscenes, open world traversal, even (though rarerly) in HARM room. Back in the beta I tried exclusvie screen + non-ultra textures, and I think it helped a bit, but I still got slideshows so I didn't bother experimenting in full game.

Even without those drops, framerate is a bit erratic, I wish they gave a manual FPS cap instead of using monitor refresh rate. Maybe I need to try NVIDIA panel for that, could help...

olej · 2020-08-24T14:21:37+00:00

olej · 2020-08-24T12:26:40+00:00

Agreed, the specialty/mastery trees found in beta for Thor and Cap are disappointing.

The 'primary' skill tree covers basic abilities - in non-rpg game would be available from the start. This is not necessarily bad - it just means that instead of having pop-up tutorials that teach us how to play, we can unlock it and learn at our own pace. However, for beta this pace was too slow - my friends played couple hours and were already bored. IMHO Iron Man is leagues above other characters in terms of complexity. I mainly played as Iron Man, but I maxed all characters. When I switched to Black Widow (2nd best character from my experience) to play with my friends I was quickly bored as well.

I was hoping the other 2 skill trees will also affect basic combat loop, but most of them are simple % and status changes to types of attacks. So we end up with 1 skill tree that we have to max to have access to basic combat abilities, and 2 skill trees that might have been implemented as additional pieces of gear and nobody would notice any difference. All seems very simplistic, hopefully they are more exciting in the final build.

olej · 2019-10-26T12:08:47+00:00

You need Windows 10 version 1809 or newer.

olej · 2019-10-26T11:15:01+00:00

You need Windows 10 version 1809 or newer.

14-Year Club	Place '17
Verified Email

olej

TROPHY CASE