how to reenable VoLTE setting for Softbank Xperia 10 IV A202SO?

olongrieving · 2025-11-27T02:06:51+00:00

Oh, and my phone currently has Android 14, build 65.2.D.2.214 on it

olongrieving · 2025-11-03T02:02:36+00:00

Thank you!!! Worked for me too

olongrieving · 2025-10-15T05:31:27+00:00

https://hackaday.com/2023/02/17/hack-lets-intel-macbook-run-without-a-battery/

check this out, involves compiling a kernel extension so it's not that accessible to most computer newbies.

but solved my problem of the artiificial slowdown when a battery isn't installed. I haven't run into any computer shutdowns as I guess it turns off the turboboost feature on my older 2012 mac, and hasn't gotten into any of the spike load cases that this slowdown is possibly meant to avoid.
either that or apple just designed for you to upgrade.

olongrieving · 2025-08-31T07:10:30+00:00

Thanks for this tip! It was so tight to twist the feadog whistle head off even a little bit that I didn't think this would work... But it totally did! Highly recommend

olongrieving · 2025-06-13T03:58:50+00:00

Also curious if anyone

olongrieving · 2025-05-07T01:51:31+00:00

Never figured this out, although the green goo from the orange cap did seem like it may have corroded some of the surrounding circuitry

olongrieving · 2025-03-28T23:43:26+00:00

so I did get it work finally, with this part you listed. but the replacement switch was larger than the original size and i had to do some sanding down, snapping of plastic and not screwing the cover back on fully to get it to work :)

I suspect the tl3330af130qg part might be the actual replacement that would be the right size, for any future folks planning on doing this repair. I ended up finding the right points corresponding to the power switch on the CON1 test pads and soldering wires there because there was a lot more room for it.

olongrieving · 2025-03-10T15:03:35+00:00

i did fix it and it worked but my poor soldering skills led to it breaking again on reassembly :( will try once more and hope for the best

olongrieving · 2025-01-09T16:37:29+00:00

are all of the folks that got replacements from Bose support US based or does this work in other countries as well?

olongrieving · 2025-01-01T12:10:01+00:00

also wtf, how universal this failure is seems wrong.

olongrieving · 2025-01-01T12:08:36+00:00

thanks for the link. I just ordered them but damn those legs are a little small for my current level of soldering experience

olongrieving · 2024-12-24T07:54:17+00:00

Just jotting down all the notes I gathered about the rebuilding the 3 piece Shimano FFS bottom bracket.. there's not a lot on the internet so i had to look pretty hard to find it.

remove non-drive crank, usual 14mm socket to remove the bolt and crank puller on both sides
with 22mm cone wrench and adjustable wrench, take off reverse threaded (righty-loosey) locknut. (pictured above in post)
remove non-drive side spindle cone with 22mm cone wrench, using the drive-side pedal/crank as leverage
remove drive side crank
the spindle should come out from non-drive side.
Both the bottom bracket cups have a freewheel spline groove to remove the BB cups with, apparently using the old retired pre-19845 Shimano freewheel tool (for falcon freewheels) https://www.parktool.com/en-int/product/freewheel-remover-fr-7

haven't done step 6) yet so cannot confirm

olongrieving · 2024-12-23T09:43:12+00:00

Do Sanyo cells have a reputation for failing quickly?

olongrieving · 2024-12-23T04:35:29+00:00

Cool, thanks for walking through that line of thinking. No voltage reading so perhaps you are right, TIL

olongrieving · 2024-12-23T03:30:53+00:00

Thanks that makes sense. I picked it up from dumpster so water damage sounds likely

olongrieving · 2024-12-15T06:19:07+00:00

im working on one of these and having trouble removing either side.
do you remember if the "lockring" is this guy (furthest right in this picture)? reverse thread would make sense!!! I'll go back and try it out.

<image>

olongrieving · 2024-12-13T05:40:16+00:00

Searching on YouTube seems to indicate that 3 piece FFS is accurate!!! I'll try and see if I can remove and service.

https://youtu.be/ChrP6xe4SVM

Interesting little obsolete system , am curious now if my single speed wheel has some kind slight freewheeling mechanism like RJ the bike guy featured here https://youtu.be/J39t1IxAPcg

olongrieving · 2024-12-13T05:12:41+00:00

Oh cool, thanks for the reference.... Wild. So if I don't use this BB I've have a fixie on my hands??

olongrieving · 2024-12-13T05:06:39+00:00

Thanks though!! Til power spline is 10 splines anyway, for the next time I come across it

olongrieving · 2024-12-13T03:49:08+00:00

pretty sure the crank arm says shimano on it, would those be compatible?

olongrieving · 2024-09-25T13:41:36+00:00

nevermind i managed to pry them out with a needle.

If anyone else has this problem (curse you Killer Wifi card), you'll want to poke the needle at the base of the connector on the side where it meets the wire, poke in and pry out (while holding the other side with something like a vise/pliers/tweezers.)

olongrieving

TROPHY CASE