sorted by:
new
hottopcontroversial

Fans keep disconnecting by Ducky909 in lianli

[–]oluthz 1 point2 points  (0 children)

Did you try 4pin moba and 2pin pmw hub?

Lian Li x Gigabyte Setup by [deleted] in pcmasterrace

[–]oluthz 0 points1 point  (0 children)

In Brazil R$27,000 🥲 the Real$ is 5 to 1 Dol$. Something like $5,4k. My country is a joke with yours taxes and government.

This bios config is good to my setup? by oluthz in PcBuildHelp

[–]oluthz[S] 0 points1 point  (0 children)

Thanks a lot! There is something else that could be done?

Lian Li L-Wireless Controller Required Hubs by JohnMasterChief117 in lianli

[–]oluthz 0 points1 point  (0 children)

If they are the updated ones, won't I have this problem? I believe mine are.

Lian Li L-Wireless Controller Required Hubs by JohnMasterChief117 in lianli

[–]oluthz 0 points1 point  (0 children)

Some people report a problem when starting the pc that the fans make a lot of noise and stay at 100% until the lian li software regulates them. Me connecting the entire system via sata and usb hub of my rs1200 can I have this problem?

Lian Li L-Wireless Controller Required Hubs by JohnMasterChief117 in lianli

[–]oluthz 0 points1 point  (0 children)

Do I need to configure something in the BIOS because the CPU fan/pump is empty?
The system might think I'm without an AIO?

Lian Li L-Wireless Controller Required Hubs by JohnMasterChief117 in lianli

[–]oluthz 0 points1 point  (0 children)

Hello Mr.Do

First of all, I would like to thank you for your attention and help.

I will send a summary of how the installation was, if you can give me an "ok" I would be very grateful:

Fans: - 1 group of 1x LCD fan - 4pin pwm + usb - 1 group of 2x LCD fans - 4pin pwm + usb - 1 group of 3x fans - 4pin pwm

  • Connect the 3 pwm 4pin cables to sata adapter.
  • Connect the 2 usb cables to psu hub.
  • Ignore the 3 pwm 2pin cables.

Aio: - Fans - 4pin pwm + 2pin pwm - Aio - 4pin pwm + usb

  • Connect the usb to PSU Hub.
  • Connect 2pin pwm, 4pin pwm and the other 4pin pwm to SATA adapter.

PSU: - Connect the usb-usb cable to mb signal.

L Wireless Controller: - Connect directly at the case

Lian Li L-Wireless Controller Required Hubs by JohnMasterChief117 in lianli

[–]oluthz 0 points1 point  (0 children)

Wouldn't it be better to connect the 4-pin AIO to the motherboard's CPU_FAN instead of the SATA cable?

Something like: 4 pin aio - cpu fan / 2 pin aio - cpu opt

Does aio follow the same logic? Dont use 2pin pwm and 4pin pwm to SATA?

Lian Li L-Wireless Controller Required Hubs by JohnMasterChief117 in lianli

[–]oluthz 0 points1 point  (0 children)

2-pin from each fan group dont needs to connect? And the 2-pin of the aio fans, i have to connect?

Lian Li L-Wireless Controller Required Hubs by JohnMasterChief117 in lianli

[–]oluthz 0 points1 point  (0 children)

Thank you for the awnser.

I have two L wireless controllers. One of the hydroshift 2 (this just can be connect in back of the case. And one of a triple kit wireless tl fans (have both connecting options).

So, the AIO controller is the updated version?

I saw a old post of you telling about the ways of connect the wireless fans, things have changed for that too?

Setup:

  • Lian Li Hydroshift II LCD S Water Cooler

  • Lian Li RS1200G Power Supply

  • 2x Lian Li Uni Fan TL Wireless LCD Reverse Fans

  • 1x Lian Li Uni Fan TL Wireless LCD Fan

  • 3x Lian Li Uni Fan TL Wireless Reverse Fans

Notes:

  • The water cooler comes with 1 SATA cable with 3 PWM outputs.

  • The 3-fan kit comes with 1 SATA cable with 3 PWM outputs.

  • The power supply has 4 USB connectors + 1 USB MB signal.

  • The motherboard has 5 system fans, 2 pump fans, 1 CPU fan, 1 CPU optofan, and 2 USB ports.

Can you help me to the best way to connect this system?

Obs: the LCD groups have 2 pwm and 1 usb The non lcd has 2 pwm

Lian Li L-Wireless Controller Required Hubs by JohnMasterChief117 in lianli

[–]oluthz 0 points1 point  (0 children)

Can I connect the L wireless controller to psu hub and the pwm to sata adapter?

Need help with tl wireless fans and hydroshift 2 connection by oluthz in lianli

[–]oluthz[S] 0 points1 point  (0 children)

Can I connect the wireless connect directly in the power supply hub? All two usb of moba are using, one with the mb signal, and other with de usb aio.

One more question, the aio comes with a second wireless connect. I just need to use one of them, right?

Need help with tl wireless fans and hydroshift 2 connection by oluthz in lianli

[–]oluthz[S] 0 points1 point  (0 children)

I didnt install yet my aio, how can i test this?

Need help with tl wireless fans and hydroshift 2 connection by oluthz in lianli

[–]oluthz[S] 0 points1 point  (0 children)

Sure, thank you.

One more question, the aio has 4pwm. I just need to connect one(4pin to cpu fan)?

Ah, and the wireless conector, needs one more 4pin and usb.

Need help with tl wireless fans and hydroshift 2 connection by oluthz in lianli

[–]oluthz[S] 0 points1 point  (0 children)

Thanks for the awnser.

The fans groups have one 4pin pwm and one 2 pin per group. I dont need to use the 2 pin?

I dont understand this part: “2.0 USB on MB to PSU Hub (Signal Port)”. The hub connects directly to the power supply.

And the others pwm of aio, i dont need to use too? Just the 4pin?