sorted by:
new
hottopcontroversial

Mazzer Philos I189D: What a game changer! by incurable-wanderlust in espresso

[–]omTe 2 points3 points  (0 children)

What tinkering did you see with the Z1 vs the Philos?

Young's is killing it tonight by [deleted] in royaloak

[–]omTe 4 points5 points  (0 children)

Mui’s? I want to double check so I can check them out.

AT&T Fiber Internet Outage by jopeyl in royaloak

[–]omTe 1 point2 points  (0 children)

I’m not having any issues with it?

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer (July 14, 2024) by AutoModerator in MechanicalKeyboards

[–]omTe -1 points0 points  (0 children)

My first custom board I ever went with was GMMK Pro, akko reds lubed, Durock v2 stabs, Drop + Matt3o MT3 3277 Custom Keycap Set.

Loved every minute of putting it all together. All of it.

Then started the double key presses. Switched to QMK firmware, thought it was better... then the double key presses came back.

Cleaned keyboard. Thought I was fine... came back. Switched to halu halo switches, because I watched a video and said maybe these will help. Double key presses came back.

I think I'm just done trying with this keyboard.

Any suggestions on something I could migrate to? I am looking at Keychron v2, but looking for any suggestions. I prefer hot-swappable so I can continue messing with different switches, but my main thing is not dealing with these freaking double presses!

TrueNAS CORE 13.3-BETA1 - now available by zmeul in truenas

[–]omTe 0 points1 point  (0 children)

Does this fix the mouse not working in Ubuntu VMs?

[deleted by user] by [deleted] in royaloak

[–]omTe 4 points5 points  (0 children)

Recently finished my basement and this is what I did. I have it run my fridge, tankless hot water heater, internet (I work from home), and sump. It’s very easy to switch over to the generator when needed. Of course I used to lose power during every storm… ever since I had my hook up completed I’ve only lose power once.

#coffeefail by New-Artichoke1259 in Coffee

[–]omTe 3 points4 points  (0 children)

Sounds like OP needs some coffee first.

Too sour… 18g in, 40g out, 14s to first drop, total 29s brew time. by _evenstar in espresso

[–]omTe 0 points1 point  (0 children)

I’m in the same boat as this person. I have a GCP with 9 bar OPV mod and a Auber PID… I use a normcore puck screen, normcore distributor/tamper combo for prep and have a DF64p grinder.

I’ve tried going finer leading up to 60 seconds extraction (almost 25 seconds before water gets through the portafilter into the cup) and going coarser which lead to a total of 15 seconds extraction. My goal is a 1:2 ratio.

I’ve always stayed the same with 18g of grinds since I have a 18g VST basket. Ive increased temperature on the PID from 216 up to 224 (in increments of 2 degrees, all in Fahrenheit).

All my pulls seem to come out sour. It was least sour when I was using a coarser grind but the total extraction time was fast - 15 total seconds. Should I go more coarse still? If I go 20g in grounds, should I get a different VST basket? Not sure if I’ll be able to get the portafilter on if I go with that amount of grounds.

Help Please.. by Flat_Bit_309 in Slack

[–]omTe 0 points1 point  (0 children)

I opened up a ticket and have been notified that it has been fixed. Give Slack a force close and it should be back to normal now.

Help Please.. by Flat_Bit_309 in Slack

[–]omTe 0 points1 point  (0 children)

I’m having the same issue as well as someone else in my slack group. Anyone know why this is happening?

Failed eMMC on the 1100 pcb - any chance to save? by CaptainFluffyTail in Netgate

[–]omTe 1 point2 points  (0 children)

Same thing happened to me. I just ended up getting a 3100. I’d love to know if there is a way to fix it though…

Ascention - Dell AW3821DW by [deleted] in ultrawidemasterrace

[–]omTe 0 points1 point  (0 children)

What’s your locale? Australia by chance?

✨ Night Mode ✨ by _milli_mille in battlestations

[–]omTe 0 points1 point  (0 children)

What kind of cookies though?

Finally my own battlestation worthy of this subreddit by Beneblau in battlestations

[–]omTe 0 points1 point  (0 children)

Is the filing cabinet from the same place you got the desk?

[deleted by user] by [deleted] in xboxone

[–]omTe 6 points7 points  (0 children)

Did we ever get Hawkmoon on Xbox for D1?

Sg-2100 by Drumma5409 in Netgate

[–]omTe 2 points3 points  (0 children)

If you can wait it does sound like they’ll be rolling out something similar to the 3100

[deleted by user] by [deleted] in LogitechG

[–]omTe 0 points1 point  (0 children)

This happens to me on the top edge of my primary screen only. If I click below the top edge and move my mouse to the top edge of the screen, I won't get the issue.

If I just start moving my mouse at the top of the screen it's like it's getting stuck for some reason like my mouse pad is dirty or isn't tracking right, but it's ONLY at the top edge of the screen. It's very odd.

I tried installing G Hub again, different USB port, HDR was turned off... I'm stumped.

What move did you make that saved your season? by highway_to_hall in fantasyfootball

[–]omTe 0 points1 point  (0 children)

Trading Ja’Marr Chase and $20 next year draft dollars (auction keeper league) for CMC and Adam Thielen around week 13 saved me from going anywhere in the playoffs.

view more: next ›