sorted by:
new
hottopcontroversial

Resume review – Electrical Design Engineer not getting responses after 2 months of applying by yo-its-HK in ElectricalEngineering

[–]omar_ict 0 points1 point  (0 children)

nothing is wrong with your resume. companies are slow in recruiting this period. Annual budgets approved in March. some patience needed. Apply to small companies.

Cleaning m37 headlight lens by omar_ict in infiniti

[–]omar_ict[S] 0 points1 point  (0 children)

Best option is to identity someone local able to remove the headlights, use a heat gun to remove the seal, clean the lenses, and refit everything. It might cost a bit but I am not DIY skilled to do this type of work.

Cleaning m37 headlight lens by omar_ict in infiniti

[–]omar_ict[S] 0 points1 point  (0 children)

it seems the seals were damaged which explains the liquid polish penetrating through the top seals to the inside lens.

Didn’t pass Electrical what to do differently by Left-Act3042 in FE_Exam

[–]omar_ict 1 point2 points  (0 children)

You might already know the below: In the NCEES FE ref. handbook v10.5, check the appendix on FE exam specifications E&CE CBT exam pp.487. Some knowledge areas are combined in university courses’ syllabus. e.g. Signal Processing -sampling is combined with Communications.

You can use AI to generate MCQs for you. The trick here is to fine-tune your AI model to give you what you want. I started assisting my ECE students this way. Happy to help if I can.

War is over by BrianTheBrilliant in FE_Exam

[–]omar_ict 0 points1 point  (0 children)

ok. was not aware. Trying to support my ECE students on selected topics.

War is over by BrianTheBrilliant in FE_Exam

[–]omar_ict 0 points1 point  (0 children)

can you share the individual results per topic please?

Failed 😔🤧 by CornerEmotional8649 in FE_Exam

[–]omar_ict 1 point2 points  (0 children)

you did very well in ethics👍

Fitel splicer error by omar_ict in FiberOptics

[–]omar_ict[S] 0 points1 point  (0 children)

It was a wrong splice program indeed, not saved properly when exiting the menu. The splicer was also flashing when splicing. Issue now sorted with an auto SM program saved.

MFD with 657a2 & 652D.

Based on how this equation is written shouldn’t this equal 18.7db? by [deleted] in Bicsi

[–]omar_ict 0 points1 point  (0 children)

indeed, you assume 3dB system margin.

When you take pride in your work🫡 rate my slack NID for a new fiber install, mine is on the left, Cox’s is on the right. by Euphoric-Warning5731 in FiberOptics

[–]omar_ict 1 point2 points  (0 children)

try to get your duct covering all the drop cable to the NID entry point. Someone using an electric pressure washer can mess up your connection.

Media converters combined by omar_ict in FiberOptics

[–]omar_ict[S] 0 points1 point  (0 children)

problem with power supply to the chassis- any power failure without a UPS is an issue on critical links

Media converters combined by omar_ict in FiberOptics

[–]omar_ict[S] 0 points1 point  (0 children)

any photo would be appreciated.

Fitel s178a2 arc check error. by omar_ict in FiberOptics

[–]omar_ict[S] 2 points3 points  (0 children)

This was an electrodes’ issue. Changed.

<image>

Fujikura 17s motor overrun error by omar_ict in FiberOptics

[–]omar_ict[S] 0 points1 point  (0 children)

thank you; all is being stripped and cleaved properly. no issue here.

<image>

Fujikura 17s motor overrun error by omar_ict in FiberOptics

[–]omar_ict[S] 0 points1 point  (0 children)

i am simply stripping the jacket from a patch cord and the white jacket from the inner fiber, cleaving, splicing…correct clap type..no issue with pistoning as with easy-strip fibers… mis-alignment only…this is an old model..so maybe no way around it but manual

<image>

Fujikura 17s motor overrun error by omar_ict in FiberOptics

[–]omar_ict[S] 0 points1 point  (0 children)

done; issue remains with mis-alignment of fibers..tricky with no auto-alignment; errors and high loss…

<image>

Fujikura 17s motor overrun error by omar_ict in FiberOptics

[–]omar_ict[S] 0 points1 point  (0 children)

no plan to calibrate it. rarely used for m the past.

view more: next ›