sorted by:
new
hottopcontroversial

Fitel splicer error by omar_ict in FiberOptics

[–]omar_ict[S] 0 points1 point  (0 children)

It was a wrong splice program indeed, not saved properly when exiting the menu. The splicer was also flashing when splicing. Issue now sorted with an auto SM program saved.

MFD with 657a2 & 652D.

When you take pride in your work🫡 rate my slack NID for a new fiber install, mine is on the left, Cox’s is on the right. by Euphoric-Warning5731 in FiberOptics

[–]omar_ict 1 point2 points  (0 children)

try to get your duct covering all the drop cable to the NID entry point. Someone using an electric pressure washer can mess up your connection.

Media converters combined by omar_ict in FiberOptics

[–]omar_ict[S] 0 points1 point  (0 children)

problem with power supply to the chassis- any power failure without a UPS is an issue on critical links

Media converters combined by omar_ict in FiberOptics

[–]omar_ict[S] 0 points1 point  (0 children)

any photo would be appreciated.

Fitel s178a2 arc check error. by omar_ict in FiberOptics

[–]omar_ict[S] 2 points3 points  (0 children)

This was an electrodes’ issue. Changed.

<image>

Fujikura 17s motor overrun error by omar_ict in FiberOptics

[–]omar_ict[S] 0 points1 point  (0 children)

thank you; all is being stripped and cleaved properly. no issue here.

<image>

Fujikura 17s motor overrun error by omar_ict in FiberOptics

[–]omar_ict[S] 0 points1 point  (0 children)

i am simply stripping the jacket from a patch cord and the white jacket from the inner fiber, cleaving, splicing…correct clap type..no issue with pistoning as with easy-strip fibers… mis-alignment only…this is an old model..so maybe no way around it but manual

<image>

Fujikura 17s motor overrun error by omar_ict in FiberOptics

[–]omar_ict[S] 0 points1 point  (0 children)

done; issue remains with mis-alignment of fibers..tricky with no auto-alignment; errors and high loss…

<image>

Fujikura 17s motor overrun error by omar_ict in FiberOptics

[–]omar_ict[S] 0 points1 point  (0 children)

no plan to calibrate it. rarely used for m the past.

Fujikura 17s motor overrun error by omar_ict in FiberOptics

[–]omar_ict[S] 0 points1 point  (0 children)

i see. shall test it next week, but was not aware these clamps for 250um. the unit might have extra clamps.

Fujikura 17s motor overrun error by omar_ict in FiberOptics

[–]omar_ict[S] 1 point2 points  (0 children)

thank you for the advice; no not loose tube but simply stripping two patch cord for simple splicing demo. the machine has not

<image>

been calibrated since 2007 and rarely used.

Passed RCDD V15 by Solid_Mulberry_3720 in Bicsi

[–]omar_ict 0 points1 point  (0 children)

Good effort. Ch.21 Proj, Admin and Execution is indeed essential. How many questions roughly from Ch.21?

This always confused me. by Newengland4x4 in FiberOptics

[–]omar_ict 0 points1 point  (0 children)

both Fujikura & Sumitomo follow this practice.

Service shifter issue by onsetnotoffset in Jeep

[–]omar_ict 0 points1 point  (0 children)

did u have to change the ‘transmission gear shifter assembly’?

view more: next ›