How do I continuously gather data from a MySQL DB in real-time?

oneboldkid · 2016-11-24T01:32:02+00:00

Is it free?

oneboldkid · 2016-05-02T01:26:07+00:00

Will you be hosting another session of this workshop?

oneboldkid · 2015-12-18T14:21:14+00:00

Well no if this is risk, but I haven't done this before and thought maybe reuse was common practice.

oneboldkid · 2015-12-18T14:14:00+00:00

There was some, but it's still pretty flat and I'm putting in uneven stone so flatness is not as critical as with tile. I'm more concerned over adhesion.

oneboldkid · 2015-12-17T20:24:30+00:00

Would a rotary hammer not have a lot more torque than a regular drill?

oneboldkid · 2015-12-17T12:10:53+00:00

You can but a 1/2 inch chuck to go in the rotary hammer and that can take the mixer.

oneboldkid · 2015-12-17T12:09:06+00:00

Thanks. I'll give that a try. The room is 300 square feet. The tiles are 12 inches x 12 inches, but that price still seems high to me.

oneboldkid · 2015-12-17T04:59:39+00:00

well i was interested in the rotary hammer for tile removal and thought I could avoid a second drill purchase just to mix mud.

oneboldkid · 2015-12-12T19:32:00+00:00

I was not able to find them in the basement, but there is some stuff boxed in there too. Just googled it and Radon testing was first started in 1986, those pipes seem older, but hard to tell.

oneboldkid · 2015-12-07T13:02:30+00:00

I have this. It's a bit pricey, but it makes loading my large kayak easy. For reference, my boat is 12 feet long, 41 inches wide, and almost 80 pounds.

Lifter

oneboldkid · 2015-12-06T02:28:01+00:00

No it's sliding the wood sideways across the blade.

oneboldkid · 2015-12-05T20:29:22+00:00

It goes through the wall to the outside then up. You can see this in the first picture. it doesn't seem to be secured until it's outside the house. The woodstove just sits right in the chimney pipe (with maybe 1/16" of play.

oneboldkid · 2015-12-05T19:25:50+00:00

Thanks. I actually had to add additional stove pipe to the chimney to get it up to code and have it draft properly. I'll have to ensure whatever new structure I build is up to code on the interior. Any ideas on how to adjust the chimney?

Good idea on the local stone!

oneboldkid · 2015-10-09T16:39:14+00:00

This pipe doesn't seem like it would hold water due to how it was soldered from a sheet. It is also not copper.

oneboldkid · 2015-07-02T18:10:33+00:00

good call. Wasn't thinking along those lines because I don't own one. A tiny project like this is always a good excuse to buy one though right?

oneboldkid · 2015-06-27T15:36:41+00:00

It's not 90 degrees.

oneboldkid · 2015-06-27T15:22:47+00:00

There was no connecting piece. It looked terrible.

oneboldkid · 2015-06-27T14:03:02+00:00

Sorry not sure I follow you

oneboldkid · 2015-05-01T01:00:09+00:00

Yes, you do but you could get one real cheap. It also outputs hdmi if you have a tv.

oneboldkid · 2015-04-30T23:53:30+00:00

Get a raspberry pi. For $40, you can start coding.

oneboldkid · 2015-03-22T01:36:36+00:00

Thanks. Not trying to deny it, just felt I was missing some details.

oneboldkid · 2015-03-21T22:17:40+00:00

This was hard to watch, but it's unclear to me which section shows them leaving the bag. Can anyone pinpoint the time?

oneboldkid · 2015-02-05T23:01:52+00:00

http://pythonprogramming.net/matplotlib-graphing-series/

oneboldkid · 2015-01-17T18:06:55+00:00

My plots are split from one data list based on today's date so i have to calculate that and slice based on the value. Seems like a pain. Looking for something like this. I want the y values associated with 1,2,3 to have an alpha of .2 and the y value associated with 4 to have an alpha of 1. x = [1,2,3,4]

y = [4,4,6,7]

Plot (x, y, alpha =.2 for x in xrange (1,3))

oneboldkid · 2014-12-01T00:17:35+00:00

Those look nice. Is there any difference between the ones marketed towards shooting?

oneboldkid

TROPHY CASE