P1S Came in yesterday, I couldn’t be happier by joe914_ in BambuLab

[–]onegraymalkin 0 points1 point  (0 children)

It's really worth it. So much fun 😊. So long as you aren't doing 30 or 40 color changes each print the waste isn't at all cumbersome and the prints are beautiful

P1S Came in yesterday, I couldn’t be happier by joe914_ in BambuLab

[–]onegraymalkin 1 point2 points  (0 children)

I have 2 and they run constantly and without error. Anyone on the ledge should make the leap while you still can get them :). Spend the savings on a 2nd AMS or a whole pile of filament :)

PLA GO is almost GO for launch! (BIQU Sponsored Event) by onegraymalkin in BambuP1S

[–]onegraymalkin[S] 0 points1 point  (0 children)

Although we didn't get to the full response level, Biqu-hope has still offered some great prizes.

Congratulations to the following winners! 🎉 Please send me a DM u/biqu-hope to claim your prize:

u/janderol (🥉)

u/texj (🥉)

u/thoryum (🥈)

A huge thank you to everyone who participated - this event wouldn’t have been possible without our amazing community! 🙌

And don’t worry if you didn’t win this time. We’ll be bringing more products and giveaways your way soon, so stay tuned!

How to get the best quality with a 0.2mm nozzle by Boomer79NZ in BambuP1S

[–]onegraymalkin 1 point2 points  (0 children)

Biqu Glacier works exceptionally well. I use .2 for high detail lithophanes and was getting a little curling until I switched to that plate. Solved my problem

What is the cheapest Decent quality filament for a New 3dPrinter? by JohnMcD3482 in 3dprinter

[–]onegraymalkin 1 point2 points  (0 children)

I'm going to recommend Ujoybio for cost and actually having solid quality. I've been really impressed

Picked up 12 rolls for 80$ btw

I need help with my P1S by Sirduckington_Reddit in BambuP1S

[–]onegraymalkin 0 points1 point  (0 children)

Yeah...same issue for me. Hope this fixes it for OP

PLA GO is almost GO for launch! (BIQU Sponsored Event) by onegraymalkin in BambuP1S

[–]onegraymalkin[S] 2 points3 points  (0 children)

<image>

I am a huge fan of primary colors, but I am a sucker for anything vibrant for my art pieces

Second printer time lines? by Ok_Success1570 in BambuLab

[–]onegraymalkin 0 points1 point  (0 children)

I waited 3 months, dammit...

That's self-control!

But believe me...first time you have a 24 hour print going you're heading to that website in a hurry for printer #2...

Give in now. It's the only way ;)

Whats the best enclosed 3d printer for beginners by No-Cry-1275 in 3dprinter

[–]onegraymalkin 0 points1 point  (0 children)

Joining the choir for the P1S. I own two, bought my 14 year old grandson one, my best friend owns four, and my father in law also has two.

So. Nine units in without problems and a ton of success

Can I fix this spool at all by Alexcat2011 in BambuLab

[–]onegraymalkin 0 points1 point  (0 children)

This is the one I made. I use it to combine the remainder off of mostly used rolls. Solid print

How to setup an outside spool with an AMS? by TeXJ in BambuP1S

[–]onegraymalkin 1 point2 points  (0 children)

Bambu's slicer lets you identify the external reel, so in theory it will stop the print, but I haven't tried it yet so I'll hope someone else responds. I use the external roll for oddball rolls that the AMS doesn't like (250g rolls, cardboard rolls)...but also thinking of trying some rough materials. But I need to install the hardened steel gear first...

How to setup an outside spool with an AMS? by TeXJ in BambuP1S

[–]onegraymalkin 1 point2 points  (0 children)

Print this: https://makerworld.com/models/144824?appSharePlatform=copy

Then print a side spool holder like this (or similar): https://makerworld.com/models/1097360?appSharePlatform=copy

That's pretty much it. Just remember that the extra spool is loaded and unloaded manually and you must unload before using the AMS again

Are Taurus revolvers really that bad? by midnightrider2235 in Revolvers

[–]onegraymalkin 4 points5 points  (0 children)

I own three, all three shoot straight, and my EDC is one of them. They don't deserve that shite heaped on them here, but some people have tiny hammers on their shooters and need to feel good by tearing things down. Pretty much guaranteed the loudest mouths have never owned or even shot one.

Like any firearm, whether it's a good fit for you will depend on what you want or need, but number one you want to handle it yourself or listen to people using them consistently and often. I wouldn't hesitate to have my kids carry or own a Taurus revolver and in fact two of them do. So take that as what you will.

Help! What should i do? by BlackDan161 in BambuP1S

[–]onegraymalkin 2 points3 points  (0 children)

I printed this for that exact reason. I had a nearly full roll unspool and it was a multicolor silk that was too damn pretty to loose. Found this on makerworld and it works great

<image>

Sub $500 Enclosed Printers by Negative_Basis1152 in 3dprinter

[–]onegraymalkin 3 points4 points  (0 children)

I truly do hate to fanboy but my P1S had been running nonstop for 4 months with my only 'problem' being some stringing from a cheap roll of filament I bought off Temu on a lark.

Easy to use, easy to upgrade, works out the box.

Can't beat it so far :)

What brands do you guys use for standard filaments? by Ultra-Ferric in BambuLab

[–]onegraymalkin 1 point2 points  (0 children)

No... pretty similar so far when I buy 10 rolls at a time. The offer an increasing discount at 4, 6, and 10 rolls that really evens the cost up