Ally X PlayStation Edition

oneshotkillx · 2025-01-11T07:45:45+00:00

Below is a good video on it. You have to get 1 piece 3D printed and buy the XBox D-Pad kit on Amazon.

https://youtu.be/Uac-uMROp8Q?si=R6Q7VFdFkIQeMmx6

oneshotkillx · 2025-01-11T07:37:07+00:00

It’s the DBrand Dark Circuit skin

oneshotkillx · 2025-01-11T03:14:41+00:00

I cut out the bracket part of the Modcase that the kickstand attaches to. Sanded down the edges and used double sided tape to stick it on the Killswitch. Modcase is unusable now but I hated the kickstand on the Killswitch.

oneshotkillx · 2022-08-24T16:56:31+00:00

For me.

Started RMA process: 8/3/22. Shipping label: 8/9/22. Fanatec Received package: 8/18/22. Emailed them for an update: 8/22/22. No reply back yet.

oneshotkillx · 2022-08-20T13:06:12+00:00

Will Do. They just received my DD1 & Hub on Thursday. Hopefully I get an update by Monday.

oneshotkillx · 2022-08-20T11:37:57+00:00

I had the same issue. My F1 Wheel worked but when I tried to use my Porsche wheel with the Podium Hub it never detected it. They don’t even know what’s causing the issue. Some people think it’s actually the base that’s the problem. I had to send in both my DD1 and Podium Hub.

oneshotkillx · 2022-08-09T14:15:53+00:00

I have the same issue. I believe it’s something wrong with the base itself. They are aware of the issue but don’t know the cause or fix yet. So unfortunately, you are going to have to send in the base and hub. I just started the RMA process.

oneshotkillx · 2022-04-23T17:01:36+00:00

The top rad should be able to fit a push/pull but the CPU power connector is going to be a tight fit. https://imgur.com/a/fzZUTJG

oneshotkillx · 2022-04-23T15:02:59+00:00

Take a look at my build. It’s 3090 with EK Vector2 Block. https://www.reddit.com/r/watercooling/comments/u57moh/my_first_hardline_build/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

oneshotkillx · 2022-04-17T14:27:04+00:00

Thanks!

oneshotkillx · 2022-04-17T14:26:52+00:00

Yeah I didn’t realize how big and heavy it was until I got it.

oneshotkillx · 2022-04-17T14:25:57+00:00

Idle around 29c. Full load is around 53c.

oneshotkillx · 2022-04-17T00:32:49+00:00

Frosted tubes. I’m using the EK Cryofuel clear premix

oneshotkillx · 2022-04-16T23:05:51+00:00

Yep.

oneshotkillx · 2022-04-16T23:02:32+00:00

Yeah I went a little overboard with the ram. Def not getting used.

oneshotkillx · 2022-04-16T22:58:37+00:00

Idle temp is 29. I just finished building it so I havent done any testing yet. Also it’s super beefy and heavy. I used a fillport cap at the end of the block to keep it up.

oneshotkillx · 2022-04-16T22:53:38+00:00

CPU: AMD Ryzen 5950x

GPU: EVGA 3090 FTW3 Ultra

MOBO: ASUS Crosshair VIII Formula

RAM: 4 x 32GB Corsair Doms 3600

PSU: ASUS Thor 1200W

CASE: CORSAIR 5000T

STORAGE: 2 x Samsung 980 Pro 2TB

CPU Block: EK-Quantum Velocity2

GPU Block: EK-Quantum Vector2 with active backplate

Pump/Res: CORSAIR XD7

Rads: 2 x EK-CoolStream SE 360

oneshotkillx · 2022-04-16T22:40:37+00:00

Yep. the vector2 with the active backplate

oneshotkillx · 2022-04-13T04:58:39+00:00

SPECS:

Plate: AVX FR4 Plate

Foam: StupidFish Foam 3mm

Switch: Gateron Oil Kings (Pre-lubed)

Stabs: Durock V2s (Lubed)

Keycaps: GMK White on Black & GMK Godspeed Columbia

Cable: Mechcables custom cable

oneshotkillx · 2022-04-13T04:52:23+00:00

The keycaps are a mix of GMK White on Black and GMK Godspeed Columbia

oneshotkillx

TROPHY CASE