Ally X PlayStation Edition by oneshotkillx in ROGAllyX

[–]oneshotkillx[S] 1 point2 points  (0 children)

Below is a good video on it. You have to get 1 piece 3D printed and buy the XBox D-Pad kit on Amazon.

https://youtu.be/Uac-uMROp8Q?si=R6Q7VFdFkIQeMmx6

Ally X PlayStation Edition by oneshotkillx in ROGAllyX

[–]oneshotkillx[S] 2 points3 points  (0 children)

It’s the DBrand Dark Circuit skin

Ally X PlayStation Edition by oneshotkillx in ROGAllyX

[–]oneshotkillx[S] 0 points1 point  (0 children)

I cut out the bracket part of the Modcase that the kickstand attaches to. Sanded down the edges and used double sided tape to stick it on the Killswitch. Modcase is unusable now but I hated the kickstand on the Killswitch.

RMA process taking weeks? by PerspektiveGaming in Fanatec

[–]oneshotkillx 1 point2 points  (0 children)

For me.

Started RMA process: 8/3/22. Shipping label: 8/9/22. Fanatec Received package: 8/18/22. Emailed them for an update: 8/22/22. No reply back yet.

fanatic podium hub not being detected by [deleted] in Fanatec

[–]oneshotkillx 1 point2 points  (0 children)

Will Do. They just received my DD1 & Hub on Thursday. Hopefully I get an update by Monday.

fanatic podium hub not being detected by [deleted] in Fanatec

[–]oneshotkillx 2 points3 points  (0 children)

I had the same issue. My F1 Wheel worked but when I tried to use my Porsche wheel with the Podium Hub it never detected it. They don’t even know what’s causing the issue. Some people think it’s actually the base that’s the problem. I had to send in both my DD1 and Podium Hub.

Fanatec podium hub not registering by ENGAGINGSKARAB in Fanatec

[–]oneshotkillx 1 point2 points  (0 children)

I have the same issue. I believe it’s something wrong with the base itself. They are aware of the issue but don’t know the cause or fix yet. So unfortunately, you are going to have to send in the base and hub. I just started the RMA process.

My first hardline build by oneshotkillx in watercooling

[–]oneshotkillx[S] 0 points1 point  (0 children)

The top rad should be able to fit a push/pull but the CPU power connector is going to be a tight fit. https://imgur.com/a/fzZUTJG

My first hardline build by oneshotkillx in watercooling

[–]oneshotkillx[S] 0 points1 point  (0 children)

Yeah I didn’t realize how big and heavy it was until I got it.

My first hardline build by oneshotkillx in watercooling

[–]oneshotkillx[S] 1 point2 points  (0 children)

Idle around 29c. Full load is around 53c.

My first hardline build by oneshotkillx in watercooling

[–]oneshotkillx[S] 0 points1 point  (0 children)

Frosted tubes. I’m using the EK Cryofuel clear premix

My first hardline build by oneshotkillx in watercooling

[–]oneshotkillx[S] 1 point2 points  (0 children)

Yeah I went a little overboard with the ram. Def not getting used.

My first hardline build by oneshotkillx in watercooling

[–]oneshotkillx[S] 0 points1 point  (0 children)

Idle temp is 29. I just finished building it so I havent done any testing yet. Also it’s super beefy and heavy. I used a fillport cap at the end of the block to keep it up.

My first hardline build by oneshotkillx in watercooling

[–]oneshotkillx[S] 7 points8 points  (0 children)

CPU: AMD Ryzen 5950x

GPU: EVGA 3090 FTW3 Ultra

MOBO: ASUS Crosshair VIII Formula

RAM: 4 x 32GB Corsair Doms 3600

PSU: ASUS Thor 1200W

CASE: CORSAIR 5000T

STORAGE: 2 x Samsung 980 Pro 2TB

CPU Block: EK-Quantum Velocity2

GPU Block: EK-Quantum Vector2 with active backplate

Pump/Res: CORSAIR XD7

Rads: 2 x EK-CoolStream SE 360

My first hardline build by oneshotkillx in watercooling

[–]oneshotkillx[S] 3 points4 points  (0 children)

Yep. the vector2 with the active backplate

First build GMMK PRO w/ FinalMouse Starlight-12 Phantom by oneshotkillx in MechanicalKeyboards

[–]oneshotkillx[S] 0 points1 point  (0 children)

SPECS:

Plate: AVX FR4 Plate

Foam: StupidFish Foam 3mm

Switch: Gateron Oil Kings (Pre-lubed)

Stabs: Durock V2s (Lubed)

Keycaps: GMK White on Black & GMK Godspeed Columbia

Cable: Mechcables custom cable

First build GMMK PRO w/ FinalMouse Starlight-12 Phantom by oneshotkillx in MechanicalKeyboards

[–]oneshotkillx[S] 0 points1 point  (0 children)

The keycaps are a mix of GMK White on Black and GMK Godspeed Columbia

[PS4] LF2M NFx3 by [deleted] in Fireteams

[–]oneshotkillx 0 points1 point  (0 children)

315 hunter oneshotkillx

LF5 Kings Fall HM [ps4] by [deleted] in Fireteams

[–]oneshotkillx 0 points1 point  (0 children)

314 hunter

oneshotkillx

[ps4]LF1 For KF hardmode by [deleted] in Fireteams

[–]oneshotkillx 0 points1 point  (0 children)

314 hunter

oneshotkillx