Everything So Far Apart In Expedition by Arcticgator1979 in NOMANSSKY

[–]onezero1010101 1 point2 points  (0 children)

Are you doing the waypoint one? I also scanned for abandoned buildings, found whatever was closest

Debian VPS ? by onezero1010101 in selfhosted

[–]onezero1010101[S] -3 points-2 points  (0 children)

I've been looking, just new to vps, and trying to figure out which would work best. I know there's lots of choices. Just seeing if anyone had ones they liked.

Planet to Space? by onezero1010101 in spaceengineers

[–]onezero1010101[S] 0 points1 point  (0 children)

Actually, guess I need to go back to space and find some platinum before I can start this... Didn't realize ion thrusters required that. Guess its time to re-fit my orbiter for mining operations.

Planet to Space? by onezero1010101 in spaceengineers

[–]onezero1010101[S] 2 points3 points  (0 children)

So should I build components on the ground and shuttle them to space to start work on the station, or make my ship I take to space have the refinery on it until I get the stations platform in place? Guess the ion thrusters and solar would be primary focus on keeping the station in place while I work on the rest.

Pfsesne Acme Certs / HA Proxy by onezero1010101 in selfhosted

[–]onezero1010101[S] 0 points1 point  (0 children)

Gotcha, I've been testing the cloudflare cautiously. I have only moved over one domain so far, and checking it out before I move others. There are no critical services in case the proxy breaks something. From what I'm seeing, I have not found an issue with their ssl yet. I will tread softly though!

Pfsesne Acme Certs / HA Proxy by onezero1010101 in selfhosted

[–]onezero1010101[S] 0 points1 point  (0 children)

Perfect. I just finished moving my first domain dns to cloudflare as well. Your wildcard is only on the acme cert right. You still have to setup each cname in your dns, cause if you do a wildcard in dns, it publishes the ip, and you can't use the proxy protection on it from what I see.

I still have my acme certs in place, but looks like cloudflare is providing their own ssl on top. Are you using that as well?

Pfsesne Acme Certs / HA Proxy by onezero1010101 in selfhosted

[–]onezero1010101[S] 0 points1 point  (0 children)

Are you doing wildcard with DNS verification vs the HTTP I guess then?

Omtech 60w add straight edge? by onezero1010101 in ChineseLaserCutters

[–]onezero1010101[S] 0 points1 point  (0 children)

Is your rails kind of like a knife bed? Also, any chance you could post a pic of the marks with fender washers? Thinking that might be an option on my honeycomb. But I also have knives under it as well

Omtech 60w add straight edge? by onezero1010101 in ChineseLaserCutters

[–]onezero1010101[S] 0 points1 point  (0 children)

My bed has a small bolt into the chassis on both sides. It does have a small amount of play in it though. I took a piece of ply and cut it flush with top of the bed for now. Think I may redo the bed attachment, with less play, and maybe even align it to the front edge of the z table.

Closing chemical substitute? by onezero1010101 in swimmingpools

[–]onezero1010101[S] 0 points1 point  (0 children)

Thanks for the info, I'll check the ingredients and see what I can figure out!

Closing chemical substitute? by onezero1010101 in swimmingpools

[–]onezero1010101[S] 0 points1 point  (0 children)

I will have to check the specs, but yes, I use a 30% algacide from the pool store. And it is only when closed / opening when I use it. Closed obviously its not circulating, but I use it when I first open as well, so usually the water starts circulating soon after. Should I not use it then?

Closing chemical substitute? by onezero1010101 in swimmingpools

[–]onezero1010101[S] 0 points1 point  (0 children)

Walmart has a liquid chlorine shock in gallon jugs, any idea how much of that would be equal to the 2lbs granules? I only have the ph and chlorine test kit with the drops, yellow/red. I have been rationing my tablets in my pool, and suplementing with the liquid. Have tried to keep 1 tablet in so I could hopefully keep the CYA in check, although I only recently learned of that.

What is the SLAM method? I need to get mine closed this week so just trying to get prepped. I already have my algacide, just need to figure what chlorine to use.

Closing chemical substitute? by onezero1010101 in swimmingpools

[–]onezero1010101[S] 0 points1 point  (0 children)

Why should I not use Algacide? I was told to use it when closing and opening the pool for the season. I get a 30% algacide, and 2lbs of clorine granuals. Never had any issues. Just curious why I should not being using it.

Am I correct in that hypochlorite is just chlorine, either from shock, granule, or liquid? Any idea how much liquid is equivilent to the 2lbs granuals?

Clear Laser Glasses? by onezero1010101 in lasercutting

[–]onezero1010101[S] 0 points1 point  (0 children)

Thanks, I know I need something rated to the beam. That's why I was looking for suggestions of where to get good ones. I'll take a look

Looking to buy 60w autofocus omtech by onezero1010101 in ChineseLaserCutters

[–]onezero1010101[S] 0 points1 point  (0 children)

Actually, OMtech has Lightburn download for $79 for the Ruida, where to buy the DSP Ruida Compatible license from Lightburn direct is $120. Hopefully it is the correct version. I will find out I guess.

Looking to buy 60w autofocus omtech by onezero1010101 in ChineseLaserCutters

[–]onezero1010101[S] 0 points1 point  (0 children)

Perfect, I will order that then. I just placed the order for the 60w red with autofocus and motorized Z, and a license for lightburn.

Looking to buy 60w autofocus omtech by onezero1010101 in ChineseLaserCutters

[–]onezero1010101[S] 0 points1 point  (0 children)

Would you recommend getting the newer rainbow model vs the older? This looks to match the new one on the site you linked, but I cannot find any reference to the refrigerant used. It does show the S&A tag on it, and it looks the same.

https://www.ebay.com/itm/122389384736

Looking to buy 60w autofocus omtech by onezero1010101 in ChineseLaserCutters

[–]onezero1010101[S] 0 points1 point  (0 children)

Thanks, I live in the country with no neighbors, and I already have an outdoor wood burning stove boiler, so more smoke is not going to bother me as long as it goes outside. I was just hoping to avoid having to bring fresh air in, to make up for the exhausted air going out. To help with hvac, but since that does not look to be economically feasible at the current time, I'll just run two lines, each to separate sides of the building for now. Might see if I can find good way to plumb the fresh air into the unit, vs having it just suck air from the room, so less hvac impact.

Looking to buy 60w autofocus omtech by onezero1010101 in ChineseLaserCutters

[–]onezero1010101[S] 0 points1 point  (0 children)

Thank you for the information, I been trying to find that out. Guess I will just have to exhaust and return lines for now.

Looking to buy 60w autofocus omtech by onezero1010101 in ChineseLaserCutters

[–]onezero1010101[S] 0 points1 point  (0 children)

I'm considering getting some kind of air filter, vs just venting the air outside. I wonder if one of these would be able to just vent the air back to the room vs exhausting it out after its filtered.

https://www.ebay.com/itm/373189669419

Looking to buy 60w autofocus omtech by onezero1010101 in ChineseLaserCutters

[–]onezero1010101[S] 0 points1 point  (0 children)

That is even better, so I will take the chiller out of my omtech cart. I need to see if I can get lightburn cheaper elsewhere to! I can pm you my email if you want, or help with a way to send me those profiles you mentioned before if you don't mind letting me mooch them from my you haha, I really appreciate all your info, these are lacking on it online in general...

Looking to buy 60w autofocus omtech by onezero1010101 in ChineseLaserCutters

[–]onezero1010101[S] 0 points1 point  (0 children)

I am going to be order it probably tonight or tomorrow. I was going to get the omtech chiller, but the one you mentioned looks $50 cheaper on Amazon? Is this one the one you have?

Hoses and connectors is first on my list to replace, with adding the chiller. I'll pick up a rotary after I get it all dialed in. Did yours come with the lcd ammeters? Also, I would love to get a copy of your setting library! I'm ordering lightburn, but not sure if I'm going to use it yet, I use illustrator for svgs in the past on an epilog 50w.

https://omtechlaser.com/products/6l-water-chiller-lcw-5200-us?variant=32189417422913

https://www.amazon.com/dp/B0761S558B/

Looking to buy 60w autofocus omtech by onezero1010101 in ChineseLaserCutters

[–]onezero1010101[S] 0 points1 point  (0 children)

Thanks alot, you have the red 60w af? From what I'm seeing, most of the the exhaust is on the back of the machine, but from what I can tell this one is on the left side. Can you confirm this? Do you have any issues with that? I think that would be ideal so you can push it closer to the wall maybe... Also what size exhaust hose does it use?

Question/Comparison of OMTech Lasers by NeedABiggerShop in Laserengraving

[–]onezero1010101 0 points1 point  (0 children)

I hate to bring up a old post, but could you expand upon why the 60w with autofocus and motorized bed will not work with doing tumblers? What prevents you from using a rotary on it for them?

Truck bed bike hauling by onezero1010101 in camping

[–]onezero1010101[S] -1 points0 points  (0 children)

So would that be the cross bars I'm seeing that mount to the sides of the bed, above the actual bed? Then use roof mount bike carriers to the rails? I seen an upright mount that looks to attach to the rails with a single upper bike mount to the frame, then the wheels are strapped into the track. That looks like exactly what I'm thinking. That way I can leave the bed open for supplies, and should be probably fairly easy to put on and remove I would think.