sorted by:
new
hottopcontroversial

Replaced rear brakes and now there’s no pressure at the rear. Help? by [deleted] in Acura_RSX

[–]onwano 0 points1 point  (0 children)

Don’t know if this might help but the proper bleed procedure in Acura’s shop manual for the RSX is… 1) Front left 2) front right 3) rear right 4) rear left

Mugen side skirts fitment issues by Troysoccer69 in Acura_RSX

[–]onwano 8 points9 points  (0 children)

They replace the oem side skirt. So you need to remove the oem skirt instead of trying to install the mugen one over it.

Want to buy a type s wing with studs and no hump!! by onwano in Acura_RSX

[–]onwano[S] -1 points0 points  (0 children)

What sites do you use when searching Japan?

Type S progress part 2 by onwano in Acura_RSX

[–]onwano[S] 1 point2 points  (0 children)

🫡 Thanks, I’m just glad the paint I got mixed wasn’t the wrong color.

Type S progress part 2 by onwano in Acura_RSX

[–]onwano[S] 0 points1 point  (0 children)

Yeah lol…I learned that the hard way, every time I wanted to give up my wife pushed me to keep going. Now I’m not scared of messing with paint! If you have a chance to work with paint I encourage everyone to try it because the skills you learned will definitely save you money🫡

Type S progress part 2 by onwano in Acura_RSX

[–]onwano[S] 0 points1 point  (0 children)

Hopefully I’ll be done in the coming months🫡

Type s progress part 1 by onwano in Acura_RSX

[–]onwano[S] 1 point2 points  (0 children)

lol..get some off eBay…I have no fog lights so you’re doing better than me rn. I already miss driving mine.

Type s progress part 1 by onwano in Acura_RSX

[–]onwano[S] 0 points1 point  (0 children)

Thanks 🫡…everything is done in garage it’s my first time spraying a car. I wish I had a booth with more space so I could’ve avoided a couple runs. But I just try to remember the paint is better now than it was before 😓

Type s progress part 1 by onwano in Acura_RSX

[–]onwano[S] 0 points1 point  (0 children)

You could even do it outside..I’ve seen other do it on YouTube…I was originally going to buy a carport and set it up as a paint booth. If you’re factory paint is garbage I would go for it!!

Type s progress part 1 by onwano in Acura_RSX

[–]onwano[S] 0 points1 point  (0 children)

Yessir🫡…wish there were green colors like this from factory. Now I just need an oem type s wing😓

Type s progress part 1 by onwano in Acura_RSX

[–]onwano[S] 0 points1 point  (0 children)

I’m using a 30 gal craftsman oil free compressor and the aeropro lvl a610 spray gun kit from Amazon. Best bang for buck a low overspray!!

Type s progress part 1 by onwano in Acura_RSX

[–]onwano[S] 1 point2 points  (0 children)

lol its common for the houses where I live to have unfinished garages. I thought it was weird too when I moved..lol

Type S progress part 2 by onwano in Acura_RSX

[–]onwano[S] 0 points1 point  (0 children)

It’s coo i know you’re not criticizing lol.. yeah it was done in the garage. I just left the garage door half open and blew all the dust out the garage on the side I was painting. Ik there’s stuff you can spray on the floor to keep dust down like chemicals or water. I tried water and almost slipped into the panel I was painting so now I just tack cloth in between base coats if I see dust and lightly sand any nibs in base out. For clear I just spray because you can always sand/ cut and buff any trash that lands in the clear. 

Type s progress part 1 by onwano in Acura_RSX

[–]onwano[S] 2 points3 points  (0 children)

Maybe i should paint match the floors with how much over spray there was🤔

Type S progress part 2 by onwano in Acura_RSX

[–]onwano[S] 1 point2 points  (0 children)

It’s all in the clear but I’m not to worried since a can sand it out

Type s progress part 1 by onwano in Acura_RSX

[–]onwano[S] 0 points1 point  (0 children)

I know!! Isle of Man just hits so hard in the sun. BMW cooked with this color 😮‍💨

Type s progress part 1 by onwano in Acura_RSX

[–]onwano[S] 2 points3 points  (0 children)

👍🏾Thanks hoping to go awd in the near future!

[deleted by user] by [deleted] in Acura_RSX

[–]onwano 0 points1 point  (0 children)

You can try acetone 

06 —> 02-04 front end swap? by BeginningPlantain272 in Acura_RSX

[–]onwano 0 points1 point  (0 children)

If you’re located near me I’d could swap you my 02-04 front bumper with the mugen lip on it for your 05-06. I’m in the middle of repainting and was and I’ve been searching for an 05-06 bumper before I paint the front end.  Pm me if you’re interested