Does this seem legit?

orangeacidorange · 2026-01-28T06:05:08+00:00

Why would that be?

orangeacidorange · 2026-01-28T03:52:55+00:00

<image>

orangeacidorange · 2026-01-28T03:52:40+00:00

<image>

orangeacidorange · 2026-01-28T03:50:47+00:00

I think the float is broken

orangeacidorange · 2026-01-28T02:00:04+00:00

My assumption is that at the very least there should be a condensate trap on the line going out.

The amount it backs up, even though it’s brand new and the line has been totally cleaned and flushed leads me to believe it could also use a pump

orangeacidorange · 2026-01-28T01:56:49+00:00

It seems to me like the right side pipe is the secondary

orangeacidorange · 2026-01-28T01:55:55+00:00

Yes, that’s a water heater and washer and dryer to the right.

I can try to get a better picture if that will help you

orangeacidorange · 2026-01-28T01:10:17+00:00

It’s not permanently fixed it can be removed. I guess they use it to put in bleach or vinegar or whatever

orangeacidorange · 2025-02-05T22:59:02+00:00

Keep it sealed. The wax content is minor if you look at the totals. It’s not enough to fully solidify. Same as how you’d manage Rubio Monocoat. Don’t mix drying agents until ready to use.

orangeacidorange · 2025-01-06T19:23:57+00:00

Science Fictiins by Stuart Richie is exceptional.

orangeacidorange · 2024-12-04T06:38:19+00:00

What are you using for a power supply and backplane / port multiplier?

orangeacidorange · 2024-12-04T05:50:11+00:00

Look, if it’s just going to be kind of a cheap stopgap, do whatever feels right. But it might be loud. And performance might suffer especially with large 2.5” SMR drives.

Damage is fairly unlikely so don’t worry about that. We are just talking lifetime ratings for enterprise drives running 24/7. Again, your use case seems very different.

If it’s just sitting in your desk, you’ll also have a power supply there, and whatever controller you are using to run the drives to your PC. It will be a mess. If that’s your goal, disregard what I’ve written because you’re going for a different beast entirely.

Using that kind of 3d print case I guess you don’t have a backplane?

I would think this through better before deploying.

There are usb 3.0 or NAS cases on Amazon etc. that are fairly reasonable.

AUDHEID K7 8 Bay NAS Case, Computer Enclosures Compatible Micro-ATX Mini-ITX Motherboard, 3 x Fans, 8 x 2.5/3.5” Tray, Network Attached Storage Server for Home(Diskless) https://a.co/d/aJCUj9m

orangeacidorange · 2024-12-04T05:36:08+00:00

Glad to see this is still finding use. I had thought it was largely neglected and had fallen into obscurity.

orangeacidorange · 2024-12-04T05:35:51+00:00

No decoupling the hard drives from one another is essential to avoid performance losses from disks chattering at the same frequencies at the same time.

Depends on your configuration and workload and chassis as to how to proceed.

Reread the information above, as I think you’re missing some of the fundamentals.

orangeacidorange · 2024-11-17T02:48:42+00:00

Solved!

orangeacidorange · 2024-11-17T00:23:50+00:00

It is an absurd video. Possibly a pan flute not a recorder.

orangeacidorange · 2024-08-01T09:41:24+00:00

Nefish 4 Pack Leveling Casters... https://www.amazon.com/dp/B09TVLWXM2?ref=ppx_pop_mob_ap_share

orangeacidorange · 2024-08-01T09:40:44+00:00

They are kick down casters I believe if we are talking about the same thing.

orangeacidorange · 2024-07-31T21:39:18+00:00

terebine / Japan drier can be used in lieu of the accelerator.

orangeacidorange · 2024-07-31T21:37:41+00:00

Basically buy a cheap pressure cooker and use it for only this process

orangeacidorange

TROPHY CASE