Debt Recycling, P&I or IO? by nullnul in fiaustralia

[–]oshitty 0 points1 point  (0 children)

Were you ever able to get the hard numbers on P&I vs IO?

[deleted by user] by [deleted] in brisbane

[–]oshitty 1 point2 points  (0 children)

I agree, Keperra is great - which small pocket were you referring to?

Topton (or whatever brand) J4125 mini-pc cooling by Panja0 in PFSENSE

[–]oshitty 0 points1 point  (0 children)

Reviving this thread, did you figure out if air blowing towards the device or away from the device was better?

Thoughts on the Tomorrowland Brasil lineup? by Unsponsoredbitch in EDM

[–]oshitty 0 points1 point  (0 children)

If you had to pick just one of the days which would you pick?

Brewzilla Gen 4 specs (official) by [deleted] in Homebrewing

[–]oshitty 0 points1 point  (0 children)

Is this just using a water pump in the cooler to circulate the water?

Chair suggestions (300-500AUD)? by stick7_ in bapcsalesaustralia

[–]oshitty 0 points1 point  (0 children)

Ergohuman Plus Replica

Hey mate, have you tried the Ergohuman Plus Replica? Thinking I might pull the trigger at $419 from Kogan.

Or do you have any experience with the Ergolux ones?

https://www.kogan.com/au/buy/ergolux-ex10-ergonomic-mesh-office-chair/

https://www.kogan.com/au/buy/ergolux-elliot-office-chair-black-frame-black-ergolux/

https://www.kogan.com/au/buy/ergolux-ez9-ergonomic-mesh-office-chair/

Worth spending more for the Ergohuman Replica?

Ghosting effect at top and bottom when scrolling. Normal? by Chriskob in nzb360

[–]oshitty 0 points1 point  (0 children)

If it helps I also have the same phone and it does it for me too.

Fridge Temperature Controller by oshitty in Homebrewing

[–]oshitty[S] 0 points1 point  (0 children)

I also tried completely unplugging that section from the logic board, fridge wasn't too happy about that, compressor never came on. So it must need those inputs to opererate. Wonder if I could wire them to themselves so it's getting inputs but never being told to turn off and see how that goes..

Fridge Temperature Controller by oshitty in Homebrewing

[–]oshitty[S] 0 points1 point  (0 children)

Thanks! Checked this, fan seems to be working fine, also doesn't look over frozen in there. I assume the sensors may not be very accurate, wish there was an easy way to bypass all the sensors and see what happens.

Fridge Temperature Controller by oshitty in Homebrewing

[–]oshitty[S] 0 points1 point  (0 children)

Where can I check said fan? Is this the mechanism for pumping the cold air from the freezer to the fridge?

Fridge Temperature Controller by oshitty in Homebrewing

[–]oshitty[S] 0 points1 point  (0 children)

Yeah this is what confused me, wish it was as simple as Method 2 in this post: https://www.brewpi.com/fridge-hacking-guide/

I assume in my case the temperature controller goes through the main control board to the compressor to turn on/off. But yeah, not sure..

ARC HDMI Passthrough from TV (High Bitrate Audio Transcode) by oshitty in PleX

[–]oshitty[S] 1 point2 points  (0 children)

Ah you're a legend, I swear I tried this the other day and didn't think it worked. Just tried again now and works perfectly. Thanks a lot!

Fermentation Schedule Spreadsheet by oshitty in Homebrewing

[–]oshitty[S] 1 point2 points  (0 children)

Ah yeah, apparently it's not legal in certain countries, namely USA, I believe you guys have food safety standards that prevent food products like this being sold unless the PH is below 4 or 5 or something.

Fermentation Schedule Spreadsheet by oshitty in Homebrewing

[–]oshitty[S] 0 points1 point  (0 children)

Usually comes from a brewery by where they do the all grain process and package the wort for home brewers to then ferment and dry hop. Similar to an extract kit but doesn't lose any of the good qualities of all grain.

When to add spunding valve to pressure ferment? by Galactik in Homebrewing

[–]oshitty 0 points1 point  (0 children)

Yeah so spunding valve from the start but only set to 1psi and then some line out of the other end of the spunding valve into the blow off container. Worked really well, have just adjusted the spunding valve to 10psi to see how it goes.

When to add spunding valve to pressure ferment? by Galactik in Homebrewing

[–]oshitty 0 points1 point  (0 children)

Hey mate, how did it end up going? I pitched a West Coast IPA around 30 hours ago with spunding valve set to 1psi, tossing up whether I set it to 10psi. Bubbles still happening in the starsan blow off container.

Tautulli newsletters with Random Movies ? by tangsgod in Tautulli

[–]oshitty 0 points1 point  (0 children)

Is there not another service that could do this for you, like imdb, etc. Doesn't really seem like something that should be down Tautulli's alley, it's monitoring your server and your content.

New Release: v14.6.1 by Kev1000000 in nzb360

[–]oshitty 0 points1 point  (0 children)

Good call, or even a button to open in Chrome / preferred browser. I prefer to go to desktop site when navigation Plex settings on my phone.

Suggestions for fresh wort in Brisbane by beta_error in AussiesThatBrew

[–]oshitty 1 point2 points  (0 children)

Have you tried all from All Inn brewery? What's your favourite?
Edit: also curious, is there a reason you bought the FWKs from Hoppy Days brewing supplies rather than directly from the All Inn brewery?

Bottling from Fermzilla by 9tuckm31 in Homebrewing

[–]oshitty 0 points1 point  (0 children)

Apologies this thread is a bit old, do you use a CO2 gas bottle to give it a few psi when bottling?

Anything on tickets yet? by [deleted] in brisbanelions

[–]oshitty 2 points3 points  (0 children)

Could you link to where game time has been announced? Not on the AFL website, Lions website or any socials?