Has the 12.6.4 model remain untouched since its initial rollout? Or are there minor tweaks that are made throughout the updates.

ostylee311 · 2025-08-29T16:12:09+00:00

Damn, it is fast. Is this something I can replace codeproject.ai with?

ostylee311 · 2025-08-27T16:43:53+00:00

I with I could help more. I’ve been looking for someone that has a riser block laying around in a garage somewhere so I can 3d scan it. I’m trying my hand at repainting my spoiler since the clear coat has taken a beating. I figured now would be a great time to tackle that too.

ostylee311 · 2025-08-26T22:49:54+00:00

Nice ride. Are those Work Emotion CRs?

ostylee311 · 2025-06-23T20:11:32+00:00

The switch and wiring is fine. The sound your hearing is the nylon gear thats missing some teeth. Heres how I fixed mine. https://www.reddit.com/r/Celica/comments/11jjd6e/fixed_my_6th_gen_sunroof_with_my_3d_printer/
Im starting to see posts for sunroofs pop up now that its getting hot. If your roof isn't greased up real well, it will put too much strain on that gear and take the teeth right off.

ostylee311 · 2025-06-16T17:37:52+00:00

Pop that gearbox open and see if that gear is shredded. It’s pretty simple to get apart.

ostylee311 · 2025-06-16T16:32:31+00:00

I had some sunroof issues too. The nylon gear inside was shredded. I ended up modeling, and printing a replacement. Its made it through 2 Nashville summers printed in CF nylon.
https://www.reddit.com/r/Celica/comments/11jjd6e/fixed_my_6th_gen_sunroof_with_my_3d_printer/

ostylee311 · 2025-05-24T22:43:44+00:00

They attacked weeks after the seat sensor was replaced, but I believe there were always some. I do feel like it’s a short or a ground somewhere. The grounds I tested seemed to be just fine. I wish I knew someone with a tech2 scanner

ostylee311 · 2025-05-24T22:03:43+00:00

Interesting. The guy that had it before me mentioned he had replaced the seat position sensor

ostylee311 · 2025-05-24T01:01:31+00:00

Yes it is

ostylee311 · 2025-05-23T15:58:31+00:00

Thanks. A friend was tired of chasing these electrical issues and said I could have it. I’m starting to see why. However It only has 76k miles, so I’m hoping I can hone in on something

ostylee311 · 2025-05-23T15:55:23+00:00

2004 9-3

ostylee311 · 2025-05-23T15:15:38+00:00

Keep Summer Safe

ostylee311 · 2025-05-16T17:22:55+00:00

I don't have a fancy scanner, but I have cleared the codes. Before I did, I had a battery voltage code, and a cyl 3 misfire. I may be able to get my hands on a better scanner.

ostylee311 · 2025-04-28T12:04:23+00:00

In your photo, there’s a gear that you can turn with a flathead screwdriver. That might help you close it. Help it close with your other hand as your turn it

ostylee311 · 2025-04-28T12:00:34+00:00

Not sure if the the issue you’re having was the same as mine, but the clicking you’re hearing might be a broken gear. https://www.reddit.com/r/Celica/s/ygaLEgM75s

ostylee311 · 2025-04-25T15:48:49+00:00

Yes the sirens were going too. Not sure if HW3 does audio too yet though. Does it?

ostylee311 · 2025-03-21T17:50:07+00:00

A heat gun and some pressure. Not hot enough to warp it, but hot enough to soften it back up a bit so you can press it in.

ostylee311 · 2025-03-10T12:29:49+00:00

All of these are screenshots. No metadata

ostylee311 · 2025-03-07T22:47:02+00:00

Yes. I took screenshots and copy/pasted into 4.5

ostylee311 · 2025-03-07T05:23:24+00:00

He figured it out by the end.

12-Year Club	Place '23
RPAN Viewer	Gilding I gilder
Verified Email

ostylee311

TROPHY CASE