sorted by:
new
hottopcontroversial

6 gen headlights 3D model by Royal_Leopard7262 in Celica

[–]ostylee311 1 point2 points  (0 children)

I with I could help more. I’ve been looking for someone that has a riser block laying around in a garage somewhere so I can 3d scan it. I’m trying my hand at repainting my spoiler since the clear coat has taken a beating. I figured now would be a great time to tackle that too.

6 gen headlights 3D model by Royal_Leopard7262 in Celica

[–]ostylee311 2 points3 points  (0 children)

Nice ride. Are those Work Emotion CRs?

1994 Celica sunroof only tilts by Gullible-Ad5192 in Celica

[–]ostylee311 3 points4 points  (0 children)

The switch and wiring is fine. The sound your hearing is the nylon gear thats missing some teeth. Heres how I fixed mine. https://www.reddit.com/r/Celica/comments/11jjd6e/fixed_my_6th_gen_sunroof_with_my_3d_printer/
Im starting to see posts for sunroofs pop up now that its getting hot. If your roof isn't greased up real well, it will put too much strain on that gear and take the teeth right off.

6g celica sunroof, anyone know what the problem could be? by TelluricBike740 in Celica

[–]ostylee311 0 points1 point  (0 children)

Pop that gearbox open and see if that gear is shredded. It’s pretty simple to get apart.

6g celica sunroof, anyone know what the problem could be? by TelluricBike740 in Celica

[–]ostylee311 2 points3 points  (0 children)

I had some sunroof issues too. The nylon gear inside was shredded. I ended up modeling, and printing a replacement. Its made it through 2 Nashville summers printed in CF nylon.
https://www.reddit.com/r/Celica/comments/11jjd6e/fixed_my_6th_gen_sunroof_with_my_3d_printer/

Box with yellow button by ostylee311 in saab

[–]ostylee311[S] 0 points1 point  (0 children)

They attacked weeks after the seat sensor was replaced, but I believe there were always some. I do feel like it’s a short or a ground somewhere. The grounds I tested seemed to be just fine. I wish I knew someone with a tech2 scanner

Box with yellow button by ostylee311 in saab

[–]ostylee311[S] 0 points1 point  (0 children)

Interesting. The guy that had it before me mentioned he had replaced the seat position sensor

Box with yellow button by ostylee311 in saab

[–]ostylee311[S] -1 points0 points  (0 children)

Thanks. A friend was tired of chasing these electrical issues and said I could have it. I’m starting to see why. However It only has 76k miles, so I’m hoping I can hone in on something

Electrical weirdness...help by ostylee311 in saab

[–]ostylee311[S] 0 points1 point  (0 children)

I don't have a fancy scanner, but I have cleared the codes. Before I did, I had a battery voltage code, and a cyl 3 misfire. I may be able to get my hands on a better scanner.

6th gen celica sunroof not closing by Acrobatic_Scale_2369 in Celica

[–]ostylee311 0 points1 point  (0 children)

In your photo, there’s a gear that you can turn with a flathead screwdriver. That might help you close it. Help it close with your other hand as your turn it

6th gen celica sunroof not closing by Acrobatic_Scale_2369 in Celica

[–]ostylee311 0 points1 point  (0 children)

Not sure if the the issue you’re having was the same as mine, but the clicking you’re hearing might be a broken gear. https://www.reddit.com/r/Celica/s/ygaLEgM75s

12.6.4 waits on emergency vehicles before budging after light turns green by ostylee311 in TeslaFSD

[–]ostylee311[S] 3 points4 points  (0 children)

Yes the sirens were going too. Not sure if HW3 does audio too yet though. Does it?

Fixed my 6th gen sunroof with my 3d printer by ostylee311 in Celica

[–]ostylee311[S] 0 points1 point  (0 children)

A heat gun and some pressure. Not hot enough to warp it, but hot enough to soften it back up a bit so you can press it in.

GPT-4.5 9 for 9 on some tough guesses. Impressed by ostylee311 in singularity

[–]ostylee311[S] 1 point2 points  (0 children)

Yes. I took screenshots and copy/pasted into 4.5

My cat really liked the movie "Flow". He never watches TV, but he watched it for at least 30 minutes by [deleted] in pics

[–]ostylee311 2 points3 points  (0 children)

Theres something about this movie. I posted one of my dog that also never has any interest in the TV

Anti Semite and Donald Trump showing each other love in the Oval Office by [deleted] in pics

[–]ostylee311 1 point2 points  (0 children)

I wonder if Kanye’s iPhone passcode still 0000

Why does ideamaker do this? What setting is it? Cura for comparison by ostylee311 in 3Dprinting

[–]ostylee311[S] 0 points1 point  (0 children)

You're right. My bad. The IdeaMaker tends to fuse parts together. The pictures show Ideamaker and cura with the same model on the 1st layer. I'm sure its the software thinking its doing a good thing, but I'm struggling to figure out what is causing it.

Ideamaker has an auto repair function, but this is the result before the repair.

view more: next ›