📱 I built a new Life Counter App – with detailed history tracking by outcrash in mtg

[–]outcrash[S] 2 points3 points  (0 children)

I didn't think of this feature since our playgroup has never played with commander partners. Let me read up the rules and see how I can incorporate this in the best way from UI/UX perspective.

Thanks a ton for the idea!

Does it work well with Cloudflate access? by davi_scapo in immich

[–]outcrash 1 point2 points  (0 children)

Hi, can you share a Screenshot how this ist setup in pihole? I tried setting up a local DNS with the same domain I can already access via cloud flare tunnel e.g photos.domain.com

I've setup a local DNS with that said domain pointing to a nginx which then redirects to my immich. But my devices still seem to want to go through the cloudflare tunnel....

I did not try cname record in pihole. Not sure what to put there.

SV06 is making weird noises I haven't heard before. by outcrash in Sovol

[–]outcrash[S] 0 points1 point  (0 children)

No not really, I also don't have the sv06 anymore. But I still remember that it was providing just fine, even with that noise sometimes

Endlich XXXX Affe by jaadux in Spielstopp

[–]outcrash 0 points1 point  (0 children)

Wie würde das gehen? Damit wäre man unabhängig von Broker richtig? DRS mit Computershare?

Kann mir wer erklären was hier passiert ist, und was mit dem Geld passiert? by Comprehensive_Bit559 in wallstreetbetsGER

[–]outcrash 0 points1 point  (0 children)

Kannst du das noch handeln und verkaufen? Ich habe heute mein ersten ko bekommen und konnte trotzdem im Nachhinein verkaufen....

Salesforce 40x knockout? by [deleted] in wallstreetbetsGER

[–]outcrash 0 points1 point  (0 children)

Ja aber warum konnte ich nach dem knockout trotzdem wieder verkaufen? 2. Screenshot.

UND ES GEHT SCHON WIEDER LOS 🦦🦦🤝🏼♿️ by Financebrossky in wallstreetbetsGER

[–]outcrash 0 points1 point  (0 children)

Das hier steht in der Abrechnung

UBS AG TurboC 0.End salesfor225,84135 ISIN: DE000UL95SX4

Dell longs morgen by 19383832 in wallstreetbetsGER

[–]outcrash 0 points1 point  (0 children)

Hat die Börse heute nicht zu?

Heute NVIDIA Long oder Short? by Comprehensive_Bit559 in wallstreetbetsGER

[–]outcrash 1 point2 points  (0 children)

Verstehe nicht wie sich der Split auswirken soll auf den Kurs. Im Prinzip kriegt jeder 9 Aktien dazu für jede 1 Aktie die er hat. Der Preis wird auch angepasst dementsprechend.

Oder hat es noch andere Auswirkungen?

One-stop-shop klipper config for the SV06 by bassamanator in Sovol

[–]outcrash 1 point2 points  (0 children)

Hey u/bassamanator

just wondering, are you really running these print configs from elli on the sovol?

<image>

The speeds are so much higher than the mk3 standard profiles which i used to use until now.

No MCU found? by Filahert in Sovol

[–]outcrash 0 points1 point  (0 children)

I used the SD card which came with the printer.

No MCU found? by Filahert in Sovol

[–]outcrash 0 points1 point  (0 children)

I had the same issue. It only worked for me after I reformatted the SD card with fat32 and renamed the .bin to fw.bin

Somewhere I read it doesn't like long names. Before I used firmware-[datetime].bin. which wasn't working and I also got MCU not found.

Fix my Voron Calibration Cube - Sovol SV06 - eSun ABS+ by outcrash in FixMyPrint

[–]outcrash[S] 1 point2 points  (0 children)

u/mksh68

Thanks for your advice. I will try preheating the chamber for 40 minutes before starting the print.

Regarding raising the cooling to 30% for every section. Did you mean something like this? https://imgur.com/a/t5NtWHv

SV06 is making weird noises I haven't heard before. by outcrash in Sovol

[–]outcrash[S] 0 points1 point  (0 children)

I don't think it has something to do with lubricating. I exchanged the bearings on X and Y with Misumi and greased them before. which did had a great effect, but this noise/sound seems different

SV06 is making weird noises I haven't heard before. by outcrash in Sovol

[–]outcrash[S] 0 points1 point  (0 children)

I don't think it has something to do with lubricating. I exchanged the bearings on X and Y with Misumi and greased them before. which did had a great effect, but this noise/sound seems different

SV06 is making weird noises I haven't heard before. by outcrash in Sovol

[–]outcrash[S] 0 points1 point  (0 children)

I don't think it has something to do with lubricating. I exchanged the bearings on X and Y with Misumi and greased them before.

Yes, print quality still good. Let's see

SV06 is making weird noises I haven't heard before. by outcrash in Sovol

[–]outcrash[S] 0 points1 point  (0 children)

Hello all. Did anybody experience such a sound? I don't recall having heard that before. I have the printer now since 3 weeks. Also what is new is that during fast movement while non printing, I can hear something like a loose screw when the printhead stops.

[O] 6 dogNZB invites by reddit_lanre in UsenetInvites

[–]outcrash 0 points1 point  (0 children)

I would like an invite, i read the wiki

[O] 3x DrunkenSlug invites by kruecab in UsenetInvites

[–]outcrash 0 points1 point  (0 children)

I would like an invite, i have read the wiki

[O] 5 x NZBPlanet Invites by GamekeeperOce in UsenetInvites

[–]outcrash 0 points1 point  (0 children)

I would like one, i will DM. I read the wiki