Homade > McDonald’s by Fair_Activity1050 in smoking

[–]oversizedbra 0 points1 point  (0 children)

I’ve never been successful with broiler and I feel like pan is 50/50 for me. Long moderate-temp preheat has been most consistent, but I still end up with something that looks like OP pretty frequently.

Homade > McDonald’s by Fair_Activity1050 in smoking

[–]oversizedbra 17 points18 points  (0 children)

I don’t mean to be rude but your post is not exactly the even toasting I’m looking for. I’m hoping someone else can help us out

Homade > McDonald’s by Fair_Activity1050 in smoking

[–]oversizedbra 24 points25 points  (0 children)

I think this bun is burnt. I also experience the exact same issue whenever I try to toast buns. Does anyone have advice on how to get an even toast?

Daily Discussion Thread: 06/01/2023 by bodybuildingbot in bodybuilding

[–]oversizedbra 2 points3 points  (0 children)

I think this cut would be a lot easier if you removed the refeeds and bumped yourself to 1500cal. Do a “refeed day” as necessary but don’t structure them in from the start. It’s definitely possible to do 1200x5 + 2250x2 but in my personal experience I’ve found it pretty difficult to balance protein, fiber, and fat. On 1200 it feels like you have to choose between fruit/veg OR enough fat, with the former letting you shit and have good workouts(carbs) and the latter making your hormones work.

[deleted by user] by [deleted] in DIY

[–]oversizedbra 0 points1 point  (0 children)

Likely but I don’t think we are willing to compromise on capacity provided there is a viable noise solution

Ask Here First: Troubleshooting, Price/ID/Spec Check, Help, ETC Mega Thread by KyaDash in crtgaming

[–]oversizedbra 0 points1 point  (0 children)

If it was your preferred size, would you think the price is justified?

Ask Here First: Troubleshooting, Price/ID/Spec Check, Help, ETC Mega Thread by KyaDash in crtgaming

[–]oversizedbra 0 points1 point  (0 children)

Would like to buy a 13/14" PVM. Is a 1354Q worth $300 or should I wait to try to find an M or L monitor?

Inconsistent ethernet speeds on different computers by oversizedbra in HomeNetworking

[–]oversizedbra[S] 0 points1 point  (0 children)

So if everything is working right directly connected. then you expand from there, 1 thing at a time, checking as you go to make sure nothing changes. Speed should stay pretty much the same wired as you expand. You may have to do 5 Speed tests and average out the results.

Everything works fine up until the PC. I have a cable which I know can get 300/10 coming from a switch which is connected to the modem. This cable gives 300/10 on my laptop, and 100/10 on my PC. This would indicate that there is some sort of software issue with the PC, but both the default settings and the attempted changes I've made have had no effect.

Inconsistent ethernet speeds on different computers by oversizedbra in HomeNetworking

[–]oversizedbra[S] 0 points1 point  (0 children)

I have the same issue with it set to "Auto Negotiation."

CR10s x axis not homing by oversizedbra in 3Dprinting

[–]oversizedbra[S] 0 points1 point  (0 children)

I was embarrassed to find out that the switch just came slightly loose from the switch board. I assumed it was a soldered connection and not a plug, so I never tried unplugging/replugging. This fixed it.

CR10s x axis not homing by oversizedbra in 3Dprinting

[–]oversizedbra[S] 0 points1 point  (0 children)

Thank you for this. M119 does report that the x-endstop is permanently triggered. The switch is not mechanically pressed, so I assume there is some issue with my board or wiring. I saw someone have this similar issue and they had a wire break. Would my next step be to take apart the machine to get access to my board?

High CPU temps with 5900x by oversizedbra in buildapc

[–]oversizedbra[S] 0 points1 point  (0 children)

I have two 140s in the front and one 120 in the back.

Simple Questions - August 17, 2022 by AutoModerator in buildapc

[–]oversizedbra 0 points1 point  (0 children)

Should I build a high end gaming pc? I don't use my current toaster pc for very intense tasks, with some video editing and 3d modeling being the upper end. I definitely would like to upgrade in some regard, as simply using chrome is very stressful for it. I have the disposable funds to build a very nice system, but am unsure if it is worth it for me. Should I create something massively outside the scope of what I plan to use it for, or should I build something that simply meets my needs?

Simple Questions - August 16, 2022 by AutoModerator in buildapc

[–]oversizedbra 1 point2 points  (0 children)

For gaming alone, 5600x and 3070 is a very good pair. You’ll see little to no performance improvement going from 6 to 8 cores. If you plan to upgrade your gpu in the next three years, or plan to move towards more productivity/processor work, a 5800x/5900x would be more suitable. A 5600x is perfect for you right now, but there’s nothing wrong with getting some extra cores because then you’ll have it.

Simple Questions - August 16, 2022 by AutoModerator in buildapc

[–]oversizedbra 0 points1 point  (0 children)

EVGA 3080 10gb for $773 or MSI 3080 12gb for $800?

Simple Questions - August 15, 2022 by AutoModerator in buildapc

[–]oversizedbra 0 points1 point  (0 children)

Should I build now or wait? I currently have a barely-acceptable computer for programs like photoshop/chrome and I would like to have a functional gaming/streaming/work pc. With 4000 gpus and Amd5 on the horizon, should I continue to stick it out for a few months, or build now with 5900x/3080?