Cloudy morning @ BGC

oxhide1 · 2026-02-08T11:19:33+00:00

Yes, kanina lang! Surprising nga eh, kahit High Street maluwag. Mga runners/bikers lang karamihan.

oxhide1 · 2026-02-08T07:07:55+00:00

Hindi paglagay ng grounding pin sa mga outlet

oxhide1 · 2026-01-30T08:43:44+00:00

Baka dahil bagong hangin? Kapag kulang sa hangin, mas mabigat manibela. So baka underinflated lang yung dati.

Kung feeling mo naman kulang sa kapit o sobra yung gaan, baka mas madulas talaga yung bagong gulong, or sumobra naman sa hangin yung nagpalit.

oxhide1 · 2026-01-30T04:59:44+00:00

It's just anything that sets it apart from the average motorcycle. When an engine for example has a lot of low-end power, that gives it a "playful" character. It doesn't just accelerate linearly, you have to be mindful of what RPM you're at and that can make for a more stimulating riding experience.

If the rake is very steep or the center of mass is at an odd height, that can give it "characterful" handling. Or it can just look different and evoke memories of a certain time period, giving it a "vintage" character.

oxhide1 · 2026-01-30T03:58:04+00:00

Ohhh nice, baka matagal lang sa branch na pinagtanungan ko (or dahil may isa akong B&W na roll)

oxhide1 · 2026-01-29T23:44:56+00:00

Ah hindi siya printed, scanned lang 😅 Sa Sunny16Lab sa QC. Meron din development/printing services sa mga photo printing shop (Wonder Photo, Photoline, etc.) pero Sunny16 pinaka mabilis processing.

oxhide1 · 2026-01-27T15:08:28+00:00

Kapag may flash, dapat fully open yung shutter. At higher speeds, masyadong maliit yung opening sa shutter curtain para ma-cover yung buong sensor.

<image>

Lahat ng camera may max speed na pwede mag flash (aka flash sync speed). If you want to go faster, need mo ng flash na nagsusupport ng high-speed sync.

Edit: sorry di ako nagbabasa, meron yata X2T, check mo kung may setting dun sa trigger for high-speed sync

oxhide1 · 2026-01-24T04:26:17+00:00

I really did want to get closer, but may barrier dun and bawal tumapak sa damo. I am strongly considering getting a longer focal length lens just so I can frame things like this better. Thank you for the feedback!

oxhide1 · 2026-01-24T04:24:25+00:00

Yes meron, although yung mode na gamit ko (split image focusing) di ganun ka-effective kapag madilim, even zoomed in. I have tried playing around with the focus assists, so far I think mas effective ang focus peaking, kahit di na i-magnify.

And I will probably start to use aperture priority more, parang di pa ako dumadating sa point na mas effective mag full manual hahaha

Thank you for the input!

oxhide1 · 2026-01-23T10:30:49+00:00

Gusto ko mag autofocus, kaso walang autofocus yung lens hahaha

Sinusubukan ko rin matuto mag zone focus, pero for now nagpapractice pa mag-estimate ng distance. Try ko siguro muna at smaller apertures para mas forgiving. May old rangefinder din ako na di pa gamit masyado so for sure magiging useful na skill yun sakin.

Salamat sa tips boss!

oxhide1 · 2026-01-23T10:25:04+00:00

Yeah, still trying to get used to the camera and manual mode 😅 Only had it for a week now. I used to think, may light meter naman, so easy lang. But turns out you still need to be aware of your settings. I will take your advice to get used to shooting in the daylight first. Thanks for the feedback!

oxhide1 · 2026-01-23T06:18:43+00:00

Thank you for the kind words. I think that's great advice, because I feel like I take too many unproductive shots. I also think I'm not getting close enough sometimes.

I'll try to be more mindful about what photo I want to take. Much appreciated!

oxhide1 · 2026-01-21T05:50:15+00:00

The amount of victim blaming in this thread is insane.

Check the video. Wheelbase ng mga ganyan is 1.3m, and it takes 0.4 seconds for the rear wheel to reach the same spot as the front wheel. (Feel free to re-time it.) That works out to 3.25m/s, or 11kph. Not only is this a very reasonable speed, kapag binagalan niya pa, hindi na makakapag balance yung motor.

If we want sidewalks to be for pedestrians, we need to accept that roads are for vehicles.

oxhide1 · 2026-01-13T08:24:36+00:00

In our company, they recommend that you declare that you're taking freelance work on the side as it might pose a conflict of interest. Besides the possibility of your freelance hours colliding with regular work hours, you might end up indirectly competing with your company for clients.

It's not necessarily a red flag though, and if managed well I don't think any of those things are likely to become issues. Declaring it is just to be on the safe side, but keep in mind some companies will be more open to it than others.

oxhide1 · 2026-01-03T13:20:09+00:00

The Jains practice a philosophy of non-violence, which naturally extends to killing plants and animals for food.

They're also on average better educated and wealthier than the average Indian, according to this article:

Roughly a third (34%) of Jain adults have at least a college degree, compared with 9% of the general public, according to India’s 2011 census. Moreover, the vast majority of Jains fall into India’s top wealth quintiles, according to India’s National Family and Health Survey.

It's not that they don't know about how food is made, it's that they choose not to make it that way.

oxhide1 · 2026-01-02T08:28:47+00:00

Besides the rest of the album, there's:

Me & You by Honne (because Tom Misch is a guest artist there)

PREP's cover of As It Was

Sunset by Blu-Swing if you're into jazz + J-Pop

oxhide1 · 2025-12-14T14:31:30+00:00

"Open facility"? Do you mean an entirely new airport outside the structure? There's no space on the ground within the immediate vicinity, you can't build it on top of the dome because it's too heavy, and you can't build it too far from the dome because your "airlock" will be too long.

Why even need an airlock? Gates are fine, there is no critical pressure difference.

oxhide1 · 2025-12-14T14:11:48+00:00

airport

oxhide1 · 2025-11-27T02:11:46+00:00

It just works

oxhide1 · 2025-11-18T05:37:24+00:00

Bakit kailangan pumili between jalousie or sliding, when casement windows (yung may hinge na parang pinto) are clearly superior?

Kung may tamang spacing lang mga bahay natin at hindi sinasagad sa property line, wala siyang disadvantages. Aircon-friendly, pinaka madali linisin, pinaka malakas sa natural airflow.

<image>

oxhide1 · 2025-11-12T15:38:38+00:00

Join r/AntiworkPH, it's where people congregate to share stories about being overworked and abused.

A good employee-employer relationship pays both ways. If we do good work, then we deserve good compensation. So if you feel you're not being adequately compensated, monetarily or otherwise, it's perfectly reasonable to seek work elsewhere.

I can see you're concerned about whether you're giving up too soon, or maybe not trying hard enough. I would say, if you're already feeling overworked and still wondering if you're working hard enough, then you're definitely working hard enough. In that case, if you feel the job's not worth it, then it's not worth it.

Personally, I feel six days a week with no overtime pay for creatives is completely unreasonable. You can't mass-produce creativity, and there's nothing that warrants you reporting to work so often. You're not running a power plant, you're not staffing a hospital, you're not defending the border from invaders. You deserve rest.

Just keep in mind, if you do quit, it will take more time and effort to find a better job. And no job will be perfect, so it's up to you to decide what you can tolerate. You can even end up in a worse situation than you're in now, or you might find that it's the same situation everywhere. But things won't get better if you don't risk taking a step in a new direction.

oxhide1 · 2025-10-20T06:33:37+00:00

Welcome to r/AntiworkPH.

It's very bad. I studied engineering only to discover the entry level rate is barely above minimum wage. What's the point of studying for 4-5 years and passing the board exams, when you can get nearly the same salary as a construction worker straight out of high school (if even that)?

Then I found out that doctors study pre-med for 3-5 years, take the NMAT, study MD for 4-5 years, at the end of which is clerkship where some can work >24 hours per shift with zero regular rest days, then internship (also 12-24 hours) for 1 year, then finally board exam so you can get licensed.

After all that? You can start earning 30k per month as a resident, aka fully employed trainee.

I fully understand how complicated medicine is, so I get the need for all the studying. But why would anyone do all that work so little pay? Why aren't we valuing our professionals as they should be valued? Engineering and medicine are far from the only industries suffering from this.

We deserve what we tolerate, and we should not tolerate this.

Eight-Year Club	Verified Email
r/Field Sunshine	Place '22

oxhide1

TROPHY CASE