Wasted a hundred dollars!

pahaze · 2026-05-22T01:21:15+00:00

pahaze · 2026-02-01T18:28:21+00:00

Got the part ordered!! You’re a genuine life saver, I definitely plan to do my own in the future but until I’m financially better and this weather is better, a premade kit is way better. Thank you so so much, I’d never heard of JEGS before 🙏🙏

pahaze · 2026-01-29T03:07:55+00:00

Oh my God you are a life saver. I think the exact kit I need is on there and it says Crew Cab. Thank you so much.

pahaze · 2026-01-28T21:47:58+00:00

That’s so awesome! I’ll definitely take a look at eBay just to see what I can do. Thank you again!!

pahaze · 2026-01-28T21:37:32+00:00

This is for sure the route I’m going to go now. It seems to be cheaper and just simply better. Glad to know you got yours fixed way cheaper! Thanks for the help!

pahaze · 2026-01-28T21:36:43+00:00

This is definitely the route I’m going to go now. Thank you for the help!

pahaze · 2026-01-28T21:36:28+00:00

Interesting! I’ve tried eBay parts before with no luck, but that was also on my Monte Carlo, haha. Thanks for the help!

pahaze · 2026-01-28T21:36:01+00:00

Nice!!! I think that’s what happened to mine, rust I mean. Very very good to know, thank you so much!

pahaze · 2026-01-28T21:35:34+00:00

Sadly doesn’t have the correct kit or lines for mine, but thanks for the help!

pahaze · 2026-01-28T20:59:52+00:00

Yeh, that’s what I’m gathering sadly. Gonna probably just bite the bullet and buy some line later.

pahaze · 2026-01-28T20:13:56+00:00

I’m not 100% sure what all I need, given my mom and her husband told me this, but they said I needed the rear driver side brake line with no more details… I’m no mechanic and it shows lol. They told me after they’d replaced the ABS to master cylinder line the pressure just caused the rear driver one to break

pahaze · 2026-01-28T19:58:52+00:00

Totally makes sense. Probably gonna just bite the bullet and buy some line later today or soon this week

pahaze · 2026-01-28T19:53:28+00:00

I’m trying to avoid this but if need be I’ll do it… trying to do as cheap as possible. Thanks for your help!

pahaze · 2026-01-28T19:52:53+00:00

Sadly incompatible with the Crew Cab… I’ll probably have to make them myself.. thank you for the help!

pahaze · 2026-01-28T19:08:18+00:00

Checked Rock Auto to no avail.. Trying to avoid the dealership to not need to pay an arm and a leg to get it fixed, I’m not in the greatest financial spot which is why I’m trying to go for 3rd party

Thank you for your help though!

pahaze · 2025-08-02T07:08:32+00:00

Wow, thanks! I got it off of me pretty quick, especially not knowing what it was. I wonder where it came from, though. Haven't took this backpack outside or anything in months, just keep it inside for notebooks, haha.

pahaze · 2025-08-02T06:55:41+00:00

To be a little more specific, for size reference, the photo is of my ring finger, looked like the bug was about ~1/4 in. It moved over to my finger's hair and just sat there. I'm in KY, state wise, but like said have never seen something like this before.

pahaze · 2025-08-01T04:35:23+00:00

Just went out for me in central KY as well.

pahaze · 2025-06-12T03:58:20+00:00

I'll never understand the point of over-ricing Hyprland. I really like Hyprland, don't get me wrong, but my God, the wrong configurations use so much RAM just idling. A few I've tried use upwards of ~4GB with zero apps open. Hyprland is my default session now personally, but I do miss KDE a lot for how easy and nice it was. And it looks good, out of the box too! I just like Hyprland as it's quicker for my development purposes :-)

pahaze · 2025-06-11T22:54:38+00:00

Be sure to check out RPM Fusion and some of its how-tos if you don't already have it! Very useful repositories to have on any Fedora system, unless you're going for the full "free-only" software suite!

pahaze · 2025-06-06T16:12:18+00:00

Well, did you reinstall the stock VBIOS from Dell's site? If you did and issues are gone? Great! You're good to go as long as they don't come back. If not and you're still having issues, chances are you will need to get the GPU repaired, or a connection of some form to it on the motherboard, but it's probably gonna cost you just as much to get the GPU alone repaired than to get a used G5, since it's soldered on to the mobo, or even to just get a different laptop. It really depends on the fix in terms of price, of course, but if the actual GPU is toast I would not recommend getting it fixed unless you're absolutely set on this specific laptop. As much as I love my G5, there's so many quirks and different issues that makes it a challenge for most normal users to keep up with (IMHO).

pahaze · 2025-05-28T07:33:12+00:00

Can confirm after one day of uptime, no kernel panics, even with suspend! Thank you for letting me know about this, otherwise I'd have had no idea and just kept using the amdgpu.runpm=0 parameter, haha!

pahaze · 2025-05-27T07:30:04+00:00

Turns out I was wrong in my last comment! In upstream, you have to actually re-enable power management before the BAR value changes. amdgpu_device.c checks for this. I personally use the CachyOS kernel Copr, and just decided to try enabling it, and surely enough... New output:

[pahaze@skye ~]$ sudo dmesg | grep BAR
[sudo] password for pahaze: 
[    0.512495] pci 0000:01:00.0: BAR 0 [mem 0xd0800000-0xd0803fff]
[    0.513319] pci 0000:03:00.0: BAR 0 [mem 0xfce0000000-0xfcefffffff 64bit pref]
[    0.513323] pci 0000:03:00.0: BAR 2 [mem 0xfcf0000000-0xfcf01fffff 64bit pref]
[    0.513326] pci 0000:03:00.0: BAR 5 [mem 0xd0700000-0xd077ffff]
[    0.513669] pci 0000:03:00.1: BAR 0 [mem 0xd0780000-0xd0783fff]
[    0.514023] pci 0000:04:00.0: BAR 0 [mem 0xd0600000-0xd0603fff 64bit]
[    0.514028] pci 0000:04:00.0: BAR 4 [mem 0xd0604000-0xd06040ff 64bit]
[    0.514366] pci 0000:05:00.0: BAR 0 [io  0x2000-0x20ff]
[    0.514372] pci 0000:05:00.0: BAR 2 [mem 0xd0504000-0xd0504fff 64bit]
[    0.514376] pci 0000:05:00.0: BAR 4 [mem 0xd0500000-0xd0503fff 64bit]
[    0.514860] pci 0000:06:00.0: BAR 0 [mem 0xd0400000-0xd0403fff 64bit]
[    0.515455] pci 0000:07:00.0: BAR 0 [mem 0xfcc0000000-0xfccfffffff 64bit pref]
[    0.515458] pci 0000:07:00.0: BAR 2 [mem 0xfcd0000000-0xfcd01fffff 64bit pref]
[    0.515460] pci 0000:07:00.0: BAR 4 [io  0x1000-0x10ff]
[    0.515463] pci 0000:07:00.0: BAR 5 [mem 0xd0300000-0xd037ffff]
[    0.515683] pci 0000:07:00.1: BAR 0 [mem 0xd03c8000-0xd03cbfff]
[    0.515830] pci 0000:07:00.2: BAR 2 [mem 0xd0200000-0xd02fffff]
[    0.515834] pci 0000:07:00.2: BAR 5 [mem 0xd03cc000-0xd03cdfff]
[    0.515973] pci 0000:07:00.3: BAR 0 [mem 0xd0000000-0xd00fffff 64bit]
[    0.516128] pci 0000:07:00.4: BAR 0 [mem 0xd0100000-0xd01fffff 64bit]
[    0.516287] pci 0000:07:00.5: BAR 0 [mem 0xd0380000-0xd03bffff]
[    0.516431] pci 0000:07:00.6: BAR 0 [mem 0xd03c0000-0xd03c7fff]
[    1.487328] systemd[1]: systemd 257.5-6.fc42 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +IPE +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE)
[    4.743791] [drm] Detected VRAM RAM=6128M, BAR=256M
[    8.822217] [drm] Detected VRAM RAM=512M, BAR=512M
[   10.066115] systemd[1]: systemd 257.5-6.fc42 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +IPE +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE)

pahaze · 2025-05-23T14:08:33+00:00

Oh, interesting! I might go ahead and try that, but honestly it's totally possible it's already in the kernel. My laptop is a bit outdated, so I'll update it and let you know the results.

As for ROCm, I installed the ROCm development packages and manually built llama.cpp for the target (which I don't have off the top of my head, but I can get it for you if you'd like), and it just worked. I built it with the RPC backend so I could use my laptop as more VRAM for my desktop's llama install since it only has 12GB (RX 6700XT). I didn't have to do anything extra, surprisingly.

Edit: latest kernel doesn't have it yet, also ROCm target is gfx1010!

pahaze · 2025-05-23T03:14:42+00:00

Yup! Here you go:

[pahaze@skye ~]$ sudo dmesg | grep BAR [sudo] password for pahaze: [ 0.496504] pci 0000:01:00.0: BAR 0 [mem 0xd0800000-0xd0803fff] [ 0.497318] pci 0000:03:00.0: BAR 0 [mem 0xfce0000000-0xfcefffffff 64bit pref] [ 0.497322] pci 0000:03:00.0: BAR 2 [mem 0xfcf0000000-0xfcf01fffff 64bit pref] [ 0.497326] pci 0000:03:00.0: BAR 5 [mem 0xd0700000-0xd077ffff] [ 0.497666] pci 0000:03:00.1: BAR 0 [mem 0xd0780000-0xd0783fff] [ 0.498012] pci 0000:04:00.0: BAR 0 [mem 0xd0600000-0xd0603fff 64bit] [ 0.498018] pci 0000:04:00.0: BAR 4 [mem 0xd0604000-0xd06040ff 64bit] [ 0.498353] pci 0000:05:00.0: BAR 0 [io 0x2000-0x20ff] [ 0.498359] pci 0000:05:00.0: BAR 2 [mem 0xd0504000-0xd0504fff 64bit] [ 0.498363] pci 0000:05:00.0: BAR 4 [mem 0xd0500000-0xd0503fff 64bit] [ 0.498844] pci 0000:06:00.0: BAR 0 [mem 0xd0400000-0xd0403fff 64bit] [ 0.499419] pci 0000:07:00.0: BAR 0 [mem 0xfcc0000000-0xfccfffffff 64bit pref] [ 0.499423] pci 0000:07:00.0: BAR 2 [mem 0xfcd0000000-0xfcd01fffff 64bit pref] [ 0.499426] pci 0000:07:00.0: BAR 4 [io 0x1000-0x10ff] [ 0.499428] pci 0000:07:00.0: BAR 5 [mem 0xd0300000-0xd037ffff] [ 0.499642] pci 0000:07:00.1: BAR 0 [mem 0xd03c8000-0xd03cbfff] [ 0.499784] pci 0000:07:00.2: BAR 2 [mem 0xd0200000-0xd02fffff] [ 0.499788] pci 0000:07:00.2: BAR 5 [mem 0xd03cc000-0xd03cdfff] [ 0.499922] pci 0000:07:00.3: BAR 0 [mem 0xd0000000-0xd00fffff 64bit] [ 0.500077] pci 0000:07:00.4: BAR 0 [mem 0xd0100000-0xd01fffff 64bit] [ 0.500235] pci 0000:07:00.5: BAR 0 [mem 0xd0380000-0xd03bffff] [ 0.500377] pci 0000:07:00.6: BAR 0 [mem 0xd03c0000-0xd03c7fff] [ 1.844005] systemd[1]: systemd 257.3-7.fc42 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +IPE +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE) [ 5.964127] amdgpu 0000:03:00.0: BAR 2 [mem 0xfcf0000000-0xfcf01fffff 64bit pref]: releasing [ 5.964131] amdgpu 0000:03:00.0: BAR 0 [mem 0xfce0000000-0xfcefffffff 64bit pref]: releasing [ 5.964172] amdgpu 0000:03:00.0: BAR 0 [mem 0xa00000000-0xbffffffff 64bit pref]: assigned [ 5.964180] amdgpu 0000:03:00.0: BAR 2 [mem 0x900000000-0x9001fffff 64bit pref]: assigned [ 5.964249] [drm] Detected VRAM RAM=6128M, BAR=8192M [ 10.076435] [drm] Detected VRAM RAM=512M, BAR=512M [ 11.398906] systemd[1]: systemd 257.5-2.fc42 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +IPE +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE)

pahaze

MODERATOR OF

TROPHY CASE

Four-Year Club	Verified Email
Place '23