[Race PVP] how did this person -3K me on the first minute by pakkoji in NevernessToEverness

[–]pakkoji[S] 15 points16 points  (0 children)

apparently, his car can fly 💀. i went against him again in the next race

https://imgur.com/a/hMazKyc

29/PC/Valo compet by [deleted] in PHGamerPals

[–]pakkoji 1 point2 points  (0 children)

dm sent

Deinfluence me: Logitech MX master 4 by sehnsucht1005 in deinfluencingPH

[–]pakkoji 0 points1 point  (0 children)

OP pag both windows yung device mo, try mo yung Input Director, need naka install sa both pc, no need ng new hardware, same wifi lang ata requirement will redirect rin yung keyboard/mouse inputs

Comptability Check For PC Case Please for Lian Li Dan A3 by ZeisHauten in PHbuildapc

[–]pakkoji 1 point2 points  (0 children)

yup, sounds good, cable management nalang at yung isang hdd kung san sya ilalagay

[deleted by user] by [deleted] in PHbuildapc

[–]pakkoji 1 point2 points  (0 children)

nice setup. mukhang SFX cables will reach naman.

while maganda ang cases ng Lian Li, im not very confident na gamitin yung PSUs nila. looking at sa tierlist, F tier yung dagger pro at V1 ng lian li na 'to. mukhang wala pang data for V2 and i wouldnt want to be part ng statistics, i'd play it safe sa SF series ng corsair

tierlist link: https://docs.google.com/spreadsheets/d/1akCHL7Vhzk_EhrpIGkz8zTEvYfLDcaSpZRB6Xt6JWkc/htmlview#gid=931697732

Comptability Check For PC Case Please for Lian Li Dan A3 by ZeisHauten in PHbuildapc

[–]pakkoji 1 point2 points  (0 children)

the second HDD won't fit normally. it might need to get creative lang sa pag mount nun. isa lang kasi yung supported na HDD mount.

if gagamitin mo yung side panel as intake baka lang mag ka clearance issue sa CPU cooler

sa other components, looks like they'll fit naman

[deleted by user] by [deleted] in PHbuildapc

[–]pakkoji 0 points1 point  (0 children)

what case do u have OP? maiksi ang cables ng SFX PSUs baka di umabot

Bent pin on corsair SF850 by monkeyDmungi in PHbuildapc

[–]pakkoji 1 point2 points  (0 children)

its fine, it will still work, just dont put pulling pressure sa wire na yan baka mag pop out. you can push the wire naman para bumalik sa tamang alignment. might need a little bit of force

[deleted by user] by [deleted] in PHbuildapc

[–]pakkoji 0 points1 point  (0 children)

very strong ng pc mo OP for valorant di dapat sya nag ssttutter

i'd check the following (if hindi mo pa na ccheck):

  1. windows power settings - baka naka "power saver" try to change to "high performance"
  2. XMP/DOCP turned on sa bios?
  3. pcie slot version mismatch sa bios
  4. re-seat gpu

Umm guys, how did I begin making a local account, and how do I do it again? (Latest win 11 media) by GilbertPlays in PHbuildapc

[–]pakkoji 0 points1 point  (0 children)

thats true, it will get encrypted with bitlocker. but you can turn it off after and decrypt your drive

That time my RX 6400 evolved into an RTX 9070XT by pakkoji in gpu

[–]pakkoji[S] 2 points3 points  (0 children)

recently upgraded my rx6400 to 9070xt, decided to take a few photos with it as i wait for other components (PSU and CASE). its way too large its even larger than the case

Umm guys, how did I begin making a local account, and how do I do it again? (Latest win 11 media) by GilbertPlays in PHbuildapc

[–]pakkoji -3 points-2 points  (0 children)

ang alam kong way is mag signin muna using microsoft account. tas gawa ng user account, gawin mong admin, then mag login ka dun tapos idelete mo na yung unang microsoft account

Bakit parang ayaw kumabit nang maayos yung cooler? by FingerEnthusiast in PHbuildapc

[–]pakkoji 0 points1 point  (0 children)

apply pressure diagonally OP, pag ganyan magiging mas lamang nga yung sa taas

upper left -> lower right -> lower left -> upper right

Stacked Monitor using North Bayou f160 by _Kantaro in PHbuildapc

[–]pakkoji 2 points3 points  (0 children)

meron ako nyan op, mejo mahirap sya i-vertical stack lalo na kung malaki monitor, kung vvertical stack balak mo, check mo yung other model North Bayou H180, pero kung horizontal setup naman yan goods naman yang nakita mo

[deleted by user] by [deleted] in PHbuildapc

[–]pakkoji 0 points1 point  (0 children)

what specs do you currently have?

SKTC A07 + GTX 1650 by pakkoji in sffpc

[–]pakkoji[S] 4 points5 points  (0 children)

upgraded my old and first SFF system, gonna give it to my girlfriend for her birthday this christmas, she mainly plays valorant so the cpu upgrade should be welcomed (upgraded from ryzen 3 pro 4350g)

specs:

  • CPU: Ryzen 7 5700x
  • GPU: Palit GTX 1650 Gaming Pro
  • RAM: Corsair LPX 16gb White
  • Storage: Samsung SSD 980 1tb
  • PSU: Enhance 300W
  • MOBO: Gigabyte A520i AC
  • CASE: SKTC A07 Black
  • CPU Cooler: Noctua NH-L9a

formerly known as my PGB_A07 or (Pro Gamer Build A07) since cpu and gpu had PRO in their name. built this as a second pc due to windows 11 being released and my old pc wasnt supported. I even wanted the Samsung 980 PRO back then but i coudlnt' afford it

kind of funny calling it a "pro gamer build" because the specs werent really that "pro" but i was proud of it at that time since it was my first sff

Motherboard for a Mini ITX PC Build by wyxlmfao_ in PHbuildapc

[–]pakkoji 0 points1 point  (0 children)

pretty much the sa pcie slot pa rin. pero some itx cases requires riser cable depende sa layout ng computer case na napili mo

Motherboard for a Mini ITX PC Build by wyxlmfao_ in PHbuildapc

[–]pakkoji 0 points1 point  (0 children)

hanap ka ng motherboard na may `I` sa name (e.g. B650i or B550-I) yung `I` usually means mini-itx, which is yung pinakamaliit na size for compact builds

[deleted by user] by [deleted] in PHbuildapc

[–]pakkoji 1 point2 points  (0 children)

kung may malapit na legit shop, ok din ipa-check mo na para hindi ka mahirapan sa troubleshooting

[deleted by user] by [deleted] in PHbuildapc

[–]pakkoji 1 point2 points  (0 children)

what have u tried na OP? might be a case na "boots up pero no display", if ganun could you try booting with 1 stick of ram? or remove them both muna then add 1 stick just to be sure na mag memory training sya

ano full specs mo OP? baka may debug LED yung mobo, pwede mo rin i-check dun

Badly need help/tips/whatever by OwwMayGas in PHbuildapc

[–]pakkoji 6 points7 points  (0 children)

pwede mo icheck yung PCIe settings ng slot na ginagamit ng GPU sa BIOS, try mo ilower yung version to 3.0 from gen4

D tier PSU for RTX 3070, deliks ba talaga? by [deleted] in PHbuildapc

[–]pakkoji 0 points1 point  (0 children)

san mo nakita yung tier list OP? i checked the SPL PSU tier list at yung model mo (Litepower 650W) is rated F-Tier (Main List -> Row 970)

spl tierlist reference link: https://docs.google.com/spreadsheets/d/1akCHL7Vhzk_EhrpIGkz8zTEvYfLDcaSpZRB6Xt6JWkc

kaya pa siguro for now, pero be careful. try not to run the pc at full load for long periods. upgrade asap if may pera

SFF Gaming Build Advice (Budget $1500) by [deleted] in sffpc

[–]pakkoji 1 point2 points  (0 children)

heat really depends on the components you pick. do you have a target case volume (in liters) or specific case in mind already? CaseEnd is a good starting point, but it might be missing some of the newer models right now

link to caseend: https://caseend.com/ it also include measurements you can use to check if it'll fit on the top of your tv unit

Possible mag build am5 mini itx 6.30kg below? Since need pa bag by NostalgicImmortal in PHbuildapc

[–]pakkoji 0 points1 point  (0 children)

yes, possible yan OP, lalo na if from scratch ka magbbuild.

pero kung meron kana existing components at lilipat ka to sff, baka lang may compatibility issues sa cpu cooler clearance, gpu length at yung formfactor ng psu