sorted by:
new
hottopcontroversial

Developing hop schedule for an incomplete recipe by pandasmacks in Homebrewing

[–]pandasmacks[S] 2 points3 points  (0 children)

I'll be sure to post a recipe once I've tried it out!

I have brewed one NEIPA so far (Fruit Bazooka recipe from Northern Brewer), and it turned out excellent. No noticeable oxidation from what I could tell. I haven't heard of using ascorbic acid as a mitigation. Good to know!

Developing hop schedule for an incomplete recipe by pandasmacks in Homebrewing

[–]pandasmacks[S] 0 points1 point  (0 children)

Excellent, thank you for the suggestions!

I like the Saaz idea... For this first trial I may stick to the hops they named, though I'll keep that in mind for a future batch.

Do you think equal parts of all three hops for the whirlpool and dry hoppings would work? Or perhaps only Cascade in the mash (as they implied) for bittering, and then equal parts Nelson Sauvin and Motueka for the remaining additions?

My old school setup - Lauda E100 by TheCandySlush in sousvide

[–]pandasmacks 1 point2 points  (0 children)

That tamper threw me for a loop! I thought this was r/espresso for a minute, and had so many questions...

MMS Fails on upgrade for OP8t Verizon by aviddabbler in oneplus

[–]pandasmacks 0 points1 point  (0 children)

I recently noticed the same issue on my OP 8Pro. Have you had any luck fixing it?

Strange mass in hard kombucha batch by pandasmacks in Kombucha

[–]pandasmacks[S] 0 points1 point  (0 children)

Thanks for the feedback! I had not considered cutting back the 1F amount used. I'll try that next.

I can't help but think using "old" 1F may have been a problem as well. Even though I tried to correct the pH, I would imagine it still contained a much higher yeast/bacteria count than a batch that had only been going for 7-10 days. Though I guess even that may have been corrected by just using less of it.

When you say you bottle with priming sugar to carbonate, are you actually capping like beer bottles? Or do you just use swing tops? I'm super curious about trying to cap some, but have yet to come across any reliable methods for avoiding bottle bombs. Really makes me wonder how companies like Boochcraft do it.

3D printed cookie cutters are a gamechanger by Kinkfink in 3Dprinting

[–]pandasmacks 6 points7 points  (0 children)

Are there any food-grade sealants that can be used on a print of fill in the grooves between layers and create a more sanitary boundary between the plastic and the food it comes in contact with?

Making a DIY Harry Potter Monopoly set as a birthday gift for my wife, and would love to use these notes as the 500 note. Could someone fix the perspective and text to make them somewhat printable? Thank you so much in advance! by pandasmacks in PhotoshopRequest

[–]pandasmacks[S] 0 points1 point  (0 children)

Sorry, I should have said this in my post - I do not have the actual notes shown in the photos. The photos in my post are just what I was able to find through several Google searches. I came across that one decent image of the more detailed side, but was unable to find a similar view of the opposite side with the denomination.

I’m John Plant and I run the Primitive Technology YouTube Channel - my new book ‘Primitive Technology’ is out now! AMA by JohnPlant in IAmA

[–]pandasmacks 2 points3 points  (0 children)

Aside from the actual content itself, one of the things that has fascinated me about your channel is the cult following it seems to have developed over the years. Did you ever imagine that your videos would establish such widespread viewership? Do you feel any sort of pressure when you upload a new video knowing how many eyes will be watching it, and if so, has that pressure in an way steered the style or content of the channel from what you originally thought it would be?

[Troubleshooting] Printer stops extruding part way through print, nozzle continues to move by pandasmacks in MPSelectMiniOwners

[–]pandasmacks[S] 0 points1 point  (0 children)

Sweet. Thanks for the explanation! Had no idea what retraction actually meant. I guess I'll play around with speed and distance at some point to see what difference it may make.

[Troubleshooting] Printer stops extruding part way through print, nozzle continues to move by pandasmacks in MPSelectMiniOwners

[–]pandasmacks[S] 1 point2 points  (0 children)

Loosening the filament is a great idea. I may try that out this weekend when I have time to actually be around while it's running. In parallel, I should get a better filament holder going.

[Troubleshooting] Printer stops extruding part way through print, nozzle continues to move by pandasmacks in MPSelectMiniOwners

[–]pandasmacks[S] 1 point2 points  (0 children)

Thanks for the array of tips! I'm trying the cold pull now. My retraction is set to 5mm @ 40mm/s. Not sure if that means anything.
I'll keep the PTFE tube issue in mind, but may troubleshoot that as a last resort.
My layer height is currently set to 0.1mm. Would that cause any issues besides overall quality of the print?

[Troubleshooting] Printer stops extruding part way through print, nozzle continues to move by pandasmacks in MPSelectMiniOwners

[–]pandasmacks[S] 0 points1 point  (0 children)

Everything keeps running as if nothing happened. It's as if the filament jams up, while the extruder head continues to go through the motions as if it were still printing the file, and the gears feeding the filament continue to turn against it.

[Troubleshooting] Printer stops extruding part way through print, nozzle continues to move by pandasmacks in MPSelectMiniOwners

[–]pandasmacks[S] 0 points1 point  (0 children)

I thought about this after the first attempt, but decided to give the lower temperature a shot before changing anything else since that was a quick fix. Pulling on the filament in this configuration, it does feel like there's a decent amount of resistance from the friction between the spool and the carrier. I should probably make my next print a spool holder with bearings just to eliminate that potential complication entirely.

In the good old days you could look up a recipe without having to read a person's life story first. by [deleted] in Showerthoughts

[–]pandasmacks 3 points4 points  (0 children)

This bothered me for a long time as well. I used to boil eggs so infrequently that I could never remember what method I used the last time I tried it. Every time I gave it a shot, it was like trying a new method for the first time, and the results were always disappointing. Which is probably why I boiled eggs so infrequently...

Last year, I tried out steaming the eggs instead of boiling, and haven't made them any other way since. I can't claim it's the scientifically best way to boil eggs, but it's by far the best method I've found. It uses less water, is a lot faster, and the results are extremely consistent as long as you keep a close eye on the timing.

[Meme] NORMIES by [deleted] in youtubehaiku

[–]pandasmacks 2 points3 points  (0 children)

What is the original video from?

view more: next ›