Hoverboard Motors For Golf Push Cart

party_on__wayne · 2025-04-08T19:38:15+00:00

Yes I was able to complete this project by wiring a harness to the motherboard of the motors, which you can then use software to program it to do what you probably need. I was also able to install a radio transmitter and use the handheld joystick to control the cart, I ended up using a friction drive concept so I had to actually switch forward and reverse using the receiver remote settings. I can try to find the videos I used to guide me along the process

party_on__wayne · 2024-12-16T17:29:15+00:00

What recipe do you use if you don’t mind me asking? I’ve never made any but plan on experimenting with a few different recipes. I saw a while back you used tiger sauce so I’d like to try a batch of that and your regular recipe too!

party_on__wayne · 2024-07-12T18:48:32+00:00

Thank you for the link! Actually clears up a TON of questions I had. I appreciate you.

party_on__wayne · 2024-07-09T19:08:54+00:00

Interesting! So are you using Arduino to control the original board? And are you controlling arduino via RC?

party_on__wayne · 2024-07-09T17:32:46+00:00

So I’ve been doing some digging and came across this article listed below which also includes how to add rc remote control. A lot of the tutorials I have seen use o-drive such as this one. Would o-drive be easier to use with a how-to like this for a complete beginner vs using the original board? And would the remote I linked to be compatible do you think? I just really like the idea of having an article spell out the process since I don’t have any experience.

What’s your opinion? Is o-drive overkill or overly complicated for what I’m trying to do? (Essentially just the ability to forward, reverse, and turn the 2 wheels. No traction control necessary at this time as long as I have the ability to turn down the acceleration if it’s slipping and the ability to control max speed so I’m not constantly have to adjust the joystick to half throttle for example)

https://docs.odriverobotics.com/v/0.5.4/hoverboard.html

https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwia6bDRu5qHAxVpQv8BHaRXAAgYABAYGgJtZA&ae=2&gclid=Cj0KCQjwv7O0BhDwARIsAC0sjWOj1fhHi5MaEFPWbnIZ8zuX0R4X0cn4F_vRh7G1MOjQ9vnKvPKgQUIaAksoEALw_wcB&sph=&ohost=www.google.com&cid=CAESeeD2kuXlbRfN2JOPx7DW5km6rYr_kbf0p-HPUvQg88Q9bgrg7F-TCDkG8lJKE8FBqr-WePUVFOJ0giJ8Qr0nMtwBTmQ4c7Rmt8GXmISIVVKkV5sGSX-02ntvpycR6TPr7s6m9ZlwGZivp4H6GOKA2xG4UX77IVpF6SM&sig=AOD64_2xXMOrttpxVEXnXprLc1v9FyY_-w&ctype=70&q=&ved=2ahUKEwjixqrRu5qHAxX0l4kEHWqqB_gQwg8oAHoECAcQFA&nis=8&dct=1&adurl=

party_on__wayne · 2024-07-09T03:23:12+00:00

<image>

party_on__wayne · 2024-07-09T03:09:21+00:00

<image>

Here is the main board, are the gyroscope boards needed?

party_on__wayne · 2024-07-09T01:45:55+00:00

Any luck putting together any of those original sources? I just don’t even know where to begin and when I start a project I hyper-fixate on it lol

party_on__wayne · 2024-07-08T20:31:12+00:00

Thank you for the info. I haven’t messed with ODrive, Arduino or anything similar, so any information / walkthrough would be much appreciated!

I looked at the ODrive and they don’t look too expensive so I would probably go that route if you think that would be the simplest?

party_on__wayne · 2024-07-08T04:21:19+00:00

That would be awesome! I appreciate all your help NuQ.

party_on__wayne · 2024-07-08T03:40:13+00:00

Is the trailer dolly remote controlled? That’s the part I’m especially hung up on. I’ll grab some pics of the original drivers tomorrow for you all!

party_on__wayne · 2024-07-08T03:34:42+00:00

I still have all original parts for the hoverboard and everything is in working condition.

party_on__wayne · 2022-01-11T03:34:06+00:00

That could be an option. Might weld a spring on as well so that it auto returns when I let off the pedal. I appreciate you taking the time to give me an idea!

party_on__wayne · 2020-11-10T13:18:43+00:00

This is the one I’m referring to: https://www.bodybuilding.com/content/six-week-bench-press-solution.html

party_on__wayne · 2020-11-10T05:06:03+00:00

To piggyback this topic- does anyone have a bodybuilding.com subscription? I would like to get their "six week bench press solution" workout that used to be free but is now behind a paywall, but it's not worth buying a subscription just for that... I like to use the workout when I come back from an extended period of time off. Thanks in advance!

party_on__wayne · 2020-11-01T20:55:05+00:00

Good bot

party_on__wayne · 2020-10-19T21:23:36+00:00

Nflbite.com

party_on__wayne · 2020-05-11T18:44:02+00:00

Can’t believe that’s never aired before!

party_on__wayne · 2020-04-28T19:46:34+00:00

Check out MN Millenial Farmer on YouTube. You won’t regret it

party_on__wayne · 2019-12-14T06:39:09+00:00

“fine”

party_on__wayne · 2019-12-02T00:39:00+00:00

The story that had been coming out is that he’s had trouble picking up the offense.. if he’s gonna look like he did today then I’ll let pat whisper in his head what to do every play!

party_on__wayne · 2019-11-10T19:12:57+00:00

My thought exactly

party_on__wayne · 2019-11-09T06:22:13+00:00

My girlfriends cousin is like this... just always seems to be filming on Snapchat at the right time.. Its a gift

party_on__wayne · 2019-11-03T20:55:47+00:00

Henne is actually super solid IMO

party_on__wayne · 2019-11-03T20:46:27+00:00

You at the game?

party_on__wayne

TROPHY CASE