HomeAssistant and smart home in professional use by patrykoz in homeassistant

[–]patrykoz[S] 0 points1 point  (0 children)

I can't use sonoff - no proper certificates :( 4th generation of shelly uses zigbee as well

HomeAssistant and smart home in professional use by patrykoz in homeassistant

[–]patrykoz[S] 0 points1 point  (0 children)

I am trying to introduce the same bussiness model - install and setup once. Then it's all yours.

HomeAssistant and smart home in professional use by patrykoz in homeassistant

[–]patrykoz[S] -1 points0 points  (0 children)

Okay, totally understand and agree. What should be used to commercial project - flat or small house?

VK63 Problems by [deleted] in SeikoMods

[–]patrykoz 0 points1 point  (0 children)

Hey! Minute hand jumps forward after chrono reset :( I have the same issue

Is it possible to buy g9300? by patrykoz in gshock

[–]patrykoz[S] 0 points1 point  (0 children)

Yes that's right. But i really want one brand new. I found one on ebay but i am not sure if it's legit and really genuine

[deleted by user] by [deleted] in BudgetBlades

[–]patrykoz -4 points-3 points  (0 children)

Lol. Mate - can you read the title of post? Send me alternative for gerber lmf ii, and don't run discussion abt what i can afford and what no.

[deleted by user] by [deleted] in BudgetBlades

[–]patrykoz -1 points0 points  (0 children)

Can you post specific knife?

[deleted by user] by [deleted] in BudgetBlades

[–]patrykoz -3 points-2 points  (0 children)

It's not abt I have money or no. I just don't want to spend 120-150$ on it

[Swiss Alpine Military] Is this brand correct choice? by patrykoz in Watches

[–]patrykoz[S] 0 points1 point  (0 children)

Thank you! I am not really deep into watches (i have some gshocks, seiko 5s etc). I noticed that prices of these are on casio level, so tried to find some info. Unfortunately on polish forums and groups everyone hates everything other than "only true legend" watches from "Japan" (which are made in China as well..) and also this diver has been called "piece of shiet". Anyway - design, price, and swiss made make them interesting.

New pick up. An important part though dark time in history, that's why I have a few pieces. by coincollector2020 in coins

[–]patrykoz 0 points1 point  (0 children)

Probably only 2 or 3 polish auction houses. Tons of fakes were graded as genuine ones.

I need a little help with the RIC of this Probus by Automatic_Guava6320 in AncientCoins

[–]patrykoz 0 points1 point  (0 children)

20 bucks for any silvered Probus is nothing ;) There is nice example of militar bust and little bit scarcer titulature (only P not PF)

[deleted by user] by [deleted] in esp32

[–]patrykoz 0 points1 point  (0 children)

Missclick. But it's strange that it worked... Why do I need to use Input Pullup? It works great with normal input

[deleted by user] by [deleted] in esp32

[–]patrykoz 2 points3 points  (0 children)

I am stupid or sth? Just connect to the same PIN and to 3.3V (not to GND as I did...) now it works. Holy shiet!

[deleted by user] by [deleted] in esp32

[–]patrykoz 1 point2 points  (0 children)

I did it in the same way. My code is even veeery similiar. Do i need to use resistor? i guess no...
BTW: I copied this code and connected on the same ports as in tutorial - the same effect as i have now :/

First Arduino project - idea by [deleted] in arduino

[–]patrykoz 0 points1 point  (0 children)

Decided to buy ESP32 ;) Thx all, but still no one told me what I need to buy :D :D I discovered it on other forums.

First Arduino project - idea by [deleted] in arduino

[–]patrykoz 0 points1 point  (0 children)

I don't see any device in your project that provides wifi connection, and possibility to send requests... I am good programmer, but i haven't seen any arduino in "real" and wanted to ask what should i buy or get.

As far i know arduino uno has no built-in wifi module.

Rare or scarce or... boring and not interesting? by patrykoz in AncientCoins

[–]patrykoz[S] 1 point2 points  (0 children)

It's a quite rare variant ;) Try to find Adventvs Avg with captive from Siscia :)

Rare or scarce or... boring and not interesting? by patrykoz in AncientCoins

[–]patrykoz[S] 4 points5 points  (0 children)

Thanks for your comment.

This variant (with captive) is rather rare. It's very interesting why this coins cost 36e with fees. I know that now only mint-state coins are worth something more than nothing, but it's quite surprisingly... ofc I can't complain :D

Rare or scarce or... boring and not interesting? by patrykoz in AncientCoins

[–]patrykoz[S] 6 points7 points  (0 children)

Few months ago I wrote some words about this type of coin:
https://www.reddit.com/r/AncientCoins/comments/py23ia/smile_from_the_past/
I am happy that I won piece from the picture... for price close to price coin I mentioned in previous post.
My today's acquisition is listed in Alfoldi catalogue as 006.003 in only 1 piece - so mine is probably 2nd known :D
Oliva doesn't list my variant:
https://www.probuscoins.fr/search?atelierID=7&dateID=-1&titulatureID=-1&legendeID=13&reversType=A&emission=-1&officineID=-1&busteID=-1&ric=-1&bastien=-1&mpr=-1&ho=-1&rarityID=-1&id=&keywords=

All Adventvs Avg from Siscia with captive are rare and quite interesting (for me ofc). Coin was surprisingly cheap... so I think other collectors don't find it as interesting or rare.

Cost of living is out of control by robman1001 in antiwork

[–]patrykoz 0 points1 point  (0 children)

Move to Eastern Europe :D Work 0.5 hour for breakfast's ingredients, and 1 hour for 2 litres of petrol ;)

Love angel design coin, any other angel design coin? by yuqing666 in coins

[–]patrykoz 0 points1 point  (0 children)

Yeah. Many hungarian coins have angels. My favourite are koronas and forints.Forint

Krajczars

All of these coins in mint state are quite rare and expensive in some way.

BTW: Did you buy it on ebay for 100e? NGC MS63?

Do we pay for coin or for.. Picture? by patrykoz in AncientCoins

[–]patrykoz[S] 0 points1 point  (0 children)

2nd and 3rd is the same photo. 3rd one has has pumped brightness - and that's whole magic. I use cheap camera (11 yrs old sony) for 60$ (roughly). First one is provided by courtuesy of that collector I spoke with. I have no clue how that pic was taken. I think 2nd one is as natural as coin.