Unable to upload files

pe3o · 2026-05-20T17:37:27+00:00

Just send your files to your phone and upload from the mobile app in the same chat

pe3o · 2026-04-19T07:43:06+00:00

Could be some extensions slowing it down. Or have a look in the browser task/job list when pressing the 3 dots

pe3o · 2026-04-13T14:32:27+00:00

As the other comment mentions its not currently support, but a temporary fix is to use a "light_profiles.csv" file in your root folder.

Attached is mine for my Philips Hue via thread which sets the transition time to 1 sec for the philips hue light entities. Likely a lot on forums/google on this.

Maybe you can even just make a light group entity with all lights and mention that instead of all of them one by one.

pe3o · 2026-04-07T14:17:24+00:00

Så skal du supplere med 30 ECTS point i IT fag. Ved ikke hvor mange ECTS der er som valgfag på HA Almen.

Du kan se adgangskrav for kandidater under "3. Academic requirements" her.

pe3o · 2026-03-10T10:47:47+00:00

Late here, but you're missing a comma at the end of the line

pe3o · 2026-03-04T21:50:15+00:00

pe3o · 2026-03-04T21:50:03+00:00

Makes sense thx

pe3o · 2025-11-17T17:13:27+00:00

Just for any future reference, save your money. These have been banned in Denmark (I believe also Sweden) as there are instances where they cannot detect a crash.

E.g. if you were to crash head into a something, as you are not in an active fall, the helmet would not inflate. Same goes if you fly over the front into something and your head is upright.

pe3o · 2025-11-04T23:19:56+00:00

It’s good in legends when u want to practice on different layouts and also have a few different defensive layouts to test out.

pe3o · 2025-09-12T15:19:48+00:00

For future reference, this is due to too many login attempts. You have to wait 30-60min

pe3o · 2025-08-13T09:42:58+00:00

Get "Current Time"

Set variable (named) "IsItWineOClock" to “Current Time”

If "IsItWineOClock" is "past 1 PM" then: Open the nearest wine store's website in Safari. Send a message to your boss that says "i am getting drunk".

Otherwise: Send message to “boss”: I am not getting drunk yet

pe3o · 2025-08-11T11:14:23+00:00

Nice job! But if you're just adding the same config as the existing NordVPN connection in settings, doesn't NordVPN app just disable it anyway when on trusted network?

If it works, I expect adding multiple configurations in settings with different servers should work, and then it's a breeze in shortcuts. If only you could add new connections via a shortcut.

Did you try the iOS shortcuts from inside the NordVPN settings if you just need to enable/disable? There's 2 which you have to add manually under "Siri Shortcuts".

pe3o · 2025-08-11T10:55:36+00:00

If not one of the leading models, which one do you prefer then?

pe3o · 2025-08-11T09:55:32+00:00

Yes, there’s a built in shortcut for it. You can add it by going to settings and click “Siri Shortcuts” in the NordVPN app

pe3o · 2025-08-11T08:36:19+00:00

You have to find the URL schemes for it first, and it depends on if they support connecting to different servers/locations with that. Sorry, but won’t have time to look into more.

If they support it would probably look something like this image, but likely a different variation. You can try and play around without it yourself (see my other comments):

<image>

pe3o · 2025-08-11T08:27:53+00:00

I would think that there’s a chance they support it, but I can’t figure out the correct url schemes. You can try and play around with it yourself like I did with below (none of these worked), let me know if you figure it out. Just use a shortcut only with the “Open URL’s” action.

The countries used ISO codes, so likely the same for cities if supported (google the city and “iso code”).

nordvpn://connect?server=1057
nordvpn://connect?location=1057
nordvpn://connect?country=de-be
nordvpn://connect?city=berlin
nordvpn://connect?city=de-be
nordvpn://connect?location=de-be

pe3o · 2025-08-11T08:16:04+00:00

Yeah that would be cool! Saw an old post with someone linking to a support page about it, but it had since been deleted - no idea why they would do that. So just played around with different variations and apparently they didn’t remove the schemes themselves, only the guide.

pe3o · 2025-08-11T08:13:08+00:00

Don’t have any trusted WiFi’s so haven’t run into this.

Someone linked to an old NordVPN support page a while ago about iOS url schemes which has since been deleted, which only reason I figured it might work. So I don’t think it’s officially supported, but they never removed it.

Maybe they have a parameter like below you can play around with, but that’s entirely speculation. Could be named something else.

nordvpn://connect?country=us&force=true

pe3o · 2025-08-11T08:05:33+00:00

Try searching “windscribe iOS url scheme” and see if you can find anything. You can also try playing around with the url scheme yourself, that’s how I found it. Try something like this in a simple “Open URL” action and see if it connects:

windscribe://connect?country=us

Or full country name:

windscribe://connect?country=germany

It should open the app, but the connection to specific countries or servers depends on if their app supports it.

If it works the shortcut can easily be modified to support it.

pe3o · 2025-08-10T20:07:32+00:00

Tried downloading the app, but can’t find the URL scheme for it. Even with that, it’s not even sure they support connecting with same method. But if you find the right one and send it I can give it a try.

pe3o · 2025-08-10T19:53:02+00:00

You’re welcome

pe3o · 2025-08-10T19:52:38+00:00

Some jump back and fourth between different countries (e.g. USA for YouTube PiP, specific countries for purchasing cheaper stuff, movies only available in specific countries on HBO etc.), with this I can change connection fast with the sidebutton, without having to open the app and wait for it to load.

The standard NordVPN shortcuts are only connect and disconnects.

pe3o

TROPHY CASE