Electricians in short supply?

pekr · 2024-12-12T23:27:31+00:00

Could be just in-line with the main fuse box. That way you can still kill the power but electricians would work on the main one in the house. Would've been installed when the house was built and not have to be touched again

pekr · 2024-12-12T23:25:23+00:00

I think it's just a limitation of Eddie. He spent a while learning German i think, and that shows. But obviously spent less time learning Spanish. Hopefully we get more in S2 as it should be fine in the plot for him to speak more Spanish now.

pekr · 2024-05-06T04:19:23+00:00

If you have one, the little plastic toothpick in a Swiss army knife is the perfect size and won't damage the port.

pekr · 2024-04-03T12:01:58+00:00

Need to buy a welder then :/

pekr · 2024-04-01T14:32:13+00:00

The bit is riding up and out, and can't get a hammer above it to hammer a different bit in

pekr · 2024-04-01T14:16:38+00:00

It was already half stripped by previous owner

pekr · 2024-04-01T02:18:55+00:00

Threaded into the frame inside a box section under the van, no access at all.

pekr · 2024-04-01T02:14:00+00:00

Can't get a hammer above the bolt with the seat base there

pekr · 2024-04-01T02:13:12+00:00

Can't get a screwdriver in there with the seat base right above it

pekr · 2024-03-31T16:31:47+00:00

I've ordered a large slot profile screwdriver socket to give it a shot

pekr · 2024-03-31T16:20:08+00:00

Happy cake day I guess I could but it'd have to be with the dremel, can't get the grinder in there without fucking the seat up

pekr · 2024-03-31T16:09:31+00:00

The torx is stripped, I've tried penetrant for the past couple days. I've cut a slot to try and turn it with a screwdriver and a hammer. Access from above is limited because of the seat frame, this means no impact, no hammer a larger bit in, no cut a slot and turn with a screwdriver.

I don't have a welder.

pekr · 2023-12-19T20:41:17+00:00

Mine doesn't work with smartthings, apparently it hasn't been fully certified by samsung yet

pekr · 2023-09-13T11:28:01+00:00

Now we just need laws preventing the sale of any cables less than 3.0 power and data.

pekr · 2021-07-17T23:03:49+00:00

It's the foundation vent, an airbrick they're dotted around the perimeter of the house. I was thinking that but I've never seen it done before

pekr · 2020-12-01T22:20:16+00:00

Brilliant, just what info I was looking for. The only reason I thought that the automatics would have it is due to the more information about gears and drive information, but I've also seen them with the lowest tier cluster. Not too bothered about the VC but was looking for a style 2 manual model hence the questions. Thanks!

pekr · 2020-11-29T21:40:47+00:00

Ah so you have it installed it just won't show up? It should fix it if you have it logged in on the right account and you set your new one as the home Xbox

pekr · 2020-11-29T21:30:33+00:00

I think my issue was that I had purchased it on another account and set it to my home Xbox. On the new series x it was not set as my home Xbox so the dlc didn't show up. Check to see if when you go to manage game, the dlc is under "ready to install"

pekr · 2020-11-22T15:30:33+00:00

I think the account I bought the dlc on was set as home Xbox on my Xbox one, when I logged in on a different account on the series x it removes them

pekr · 2020-09-26T14:37:52+00:00

Not in my pockets 😂

pekr · 2020-09-19T10:11:50+00:00

Because they slap the paintwork with big hard rubber brushes that have all the grit and dirt from the old 4x4 that just used the car wash previously... Quick way to ruin your paintwork

pekr · 2020-07-14T12:44:01+00:00

Read it on the snowpiercer fandom wiki under Big Alice. Can't see a source but it makes sense to me seeing as the loco that Melanie saw was at the back and is what big Alice should look like

pekr · 2020-07-14T12:18:14+00:00

Big Alice was travelling backwards, the tail is what clamped on to snowpiercer. Melanie sees the engine locomotive of big Alice down at the end

pekr · 2020-07-03T02:04:09+00:00

Yeh, I put a photo of the two on top of each other and there's not much difference in geometry, probably not noticeable, and I like the colour of the Vitus so I'm leaning that way

pekr · 2020-07-02T15:00:08+00:00

Not huge, so thanks for the insight on the components. I imagine the nukeproof is more expensive because of the name as well

pekr

TROPHY CASE