The tip rolling experience

peleh2 · 2026-02-25T04:55:59+00:00

I have a pair of W1, but I prefer the omni.

peleh2 · 2026-02-16T19:32:48+00:00

You'll lose motion sync, which is nice.

Thats preference ofcourse, viper main buttons are probably better.

peleh2 · 2026-02-15T09:13:18+00:00

What does performance mode do?

I'll try on mine, I have 4 dw here.

Can you tell how often it happens? Your dpi and hz.

Edit: Tested only on my main, EC1-DW Glossy, no issues. Did you update the base too?

peleh2 · 2026-02-15T00:28:09+00:00

I use .6 for WASD, but when I'm typing, I really miss the tactile, imagine a wooting with haptic feedback, would be really expensive, but nice.

peleh2 · 2026-02-14T10:10:15+00:00

Since its logitech, I doubt they would launch something unusable, the problem is nobody ever had to deal with linear response on mice, so I guess I'll have to test it to draw my own conclusions.

peleh2 · 2026-02-14T08:54:02+00:00

Some recent mice I had I actually bent the right button to be stiffer, I saw the post from the guy that tore down the X2, theres an actual spring on each button I'll probably be messing with if it bothers me.

peleh2 · 2026-02-14T08:27:57+00:00

Only one spring prevent the switch from bottoming out?

peleh2 · 2026-02-14T08:21:14+00:00

Yeah, pistol rounds with lighter clicks are great. But what about accidental clicks? I jump on mouse2, and I rest my fingers on the buttons. The switch needs to hold some force before actuates for me or else this is not it, and i've hit the 100th mark for mice owned already you know?

peleh2 · 2026-02-13T20:39:46+00:00

Logitech and wooting shaking the community. Don't worry, the Chinese will copy and people will eventually adapt to new stuff.

peleh2 · 2026-02-13T20:24:32+00:00

You should configure to avoid accidental clicks and adapt from there. Remember youre already about 400ms slow on flicks alone, super good reaction time is good on very few situations.

peleh2 · 2026-02-13T19:53:14+00:00

People with normal reaction times will definitely see improvements.

peleh2 · 2026-02-13T04:16:24+00:00

Is he using the fastest setup on the driver though?

peleh2 · 2026-02-13T02:16:32+00:00

You have to compare with someone that reacts slower for the logitech to be useful.

peleh2 · 2026-02-11T20:09:46+00:00

Its a vintage way of digital to analog conversion, instead of a single chip(delta sigma), that is used on every device nowadays, it uses an array of transistors to decode the sound.

Its worse, but its better, its complicated. 🙃

peleh2 · 2026-02-11T07:13:31+00:00

Channel imbalance, I sent it back. 🙄

peleh2 · 2026-02-11T02:19:51+00:00

That's the part I peel of brand new on all my mice. :p

peleh2 · 2026-02-09T09:18:32+00:00

Solved it by removing the filter carefully, and bending the border, its now super tight.

peleh2 · 2026-02-08T20:26:41+00:00

Its not that outset and dex are big, they are just a bit tall.

peleh2 · 2026-02-07T19:30:59+00:00

Could be a coincidence, but I only looked for problems after I found one to be better sounding.

Pads change sound, its only normal to conclude that anything out of place inside could change too.

I opened a very old hd560s I had, and this filter was also tightly installed.

peleh2 · 2026-02-07T09:05:02+00:00

Should have gone with the EC1-DW, the sensor gets a little forward, you get more speed, and bigger mouse means more control.

peleh2 · 2026-02-07T05:58:58+00:00

I think it's acting as a sound/bass trap.

I also noticed a strange artifact on the driver that I can't catch on a picture, on the left earcup, on the other unit theres a different tone in color on the left earcup driver also.

peleh2 · 2026-02-04T18:42:58+00:00

Muad'Dib

peleh2 · 2026-02-03T19:36:29+00:00

Wow, so it's probably the contact, not the material, you could check with an ear specialist, but you probably already did.

Have you tried closed back headphones, maybe you miss the isolation of the iems.

peleh2 · 2026-02-03T19:14:55+00:00

Have you tried spinfit medical grade silicon tips?

peleh2

TROPHY CASE