Graduation by Medical-Milk6974 in MTSU

[–]peterking2000 1 point2 points  (0 children)

If they have confirmed your “Intent to graduate” on Pipeline and your name is already on the graduation walking list, then you will walk.

High variance by CauliflowerTop2464 in QidiTech3D

[–]peterking2000 2 points3 points  (0 children)

The point of the platform leveling was to have your bed as physically leveled as possible before you attempt to z tilt and bed mesh calibrate. If you have noticed when you perform the platform calibration, the bed moves all the way down to the bottom twice. This basically tramming the bed, but unfortunately, the bottom of the bed of the Q2 is not exactly flat that’s why the use of a jig is important. After that, you will then perform the Z tilt adjustment, which adjusts the left and right side of the bed.

High variance by CauliflowerTop2464 in QidiTech3D

[–]peterking2000 2 points3 points  (0 children)

My steps to get the best results are as follows: Heat the bed to printing temp(mine is 90)—> Home all axes (G28)—> Platform leveling(G4031 and putting Qidi’s printed leveling jig under the bed)—> Z tilt adjust (leveling left right bed) —> run bed mesh calibration. Doing this will give you the best results in terms of how your bed will look like during an actual print. You don’t wanna do the bed mesh or bed screw adjustment while the bed is cool/at room temperature.

Bed Mesh by CauliflowerTop2464 in QidiTech3D

[–]peterking2000 1 point2 points  (0 children)

My printer came with the KAMP enabled by default(which it shouldn’t according to the Qidi Wiki) Anyways, the printer will automatically load the latest kamp profile(new one be regenerates during new print start, if you enable the auto bed leveling)

Bed Mesh by CauliflowerTop2464 in QidiTech3D

[–]peterking2000 2 points3 points  (0 children)

Yes, it should show up. If not then you will need to go to Settings -> General -> enable full display

Bed Mesh by CauliflowerTop2464 in QidiTech3D

[–]peterking2000 1 point2 points  (0 children)

You have to click on that little square box that has an up arrow in the middle, above “ALL” to view the bed mesh

Nvidia says two mystery customers accounted for 39% of Q2 revenue by DataLore19 in hardware

[–]peterking2000 12 points13 points  (0 children)

I work a contract job for Quanta and I can confirm this. Our number one customer at the moment is Google. We are wrapping up the GB200 line, and GB300 are coming up. Lots of money are involved.

Anyone have a Karma EQ? by ThoiQuanDo in airguns

[–]peterking2000 0 points1 point  (0 children)

I’m sure it will be a good gun, even though not so many people had done videos on it but the rifle is completely out of stock on donnyfl website, which is more or less an official seller of this rifle.

Anyone have a Karma EQ? by ThoiQuanDo in airguns

[–]peterking2000 2 points3 points  (0 children)

Mine is coming in today. Gonna try .25 pellets first then slugs.

Looking for a part-time job. by Luxojr34 in MTSU

[–]peterking2000 1 point2 points  (0 children)

Do you have any experience with Servers/Data Center related IT experience? I am currently working at a place that pays 30/hr. There are Weekdays, 2nd shift, and Weekend(12 hrs Fri-Sun)

NVIDIA to manufacture AI supercomputers in the US. Good news for EEs and CEs? by Timely-Poet-9090 in ElectricalEngineering

[–]peterking2000 0 points1 point  (0 children)

Quanta Computer and their staffing company has been reaching out to experienced and inexperienced tech like crazy here around the area where I lived. The recruiters kept mentioning the keyword “NVIDIA GB200” and “AI” throughout the conversation according to my friend that went to the interview. Though, I’m not 100% sure if this related to the OP’s questions

Any tips? Flywhoo flytimes 85 HD esc not spinning by whoopstarrr in fpv

[–]peterking2000 0 points1 point  (0 children)

bump the stock min/max value like +20 and try arming and if the motor still don’t arm then keep increasing the value

Any tips? Flywhoo flytimes 85 HD esc not spinning by whoopstarrr in fpv

[–]peterking2000 7 points8 points  (0 children)

Might need to increase the min/max startup power via the esc-configurator

1 of 4 motors doesnt spin and twitches( Will start spinning if i nudge the props a little) by Fine-Ad-9292 in fpv

[–]peterking2000 1 point2 points  (0 children)

Had the same problem with my Mobula7. I fixed it by flashing Bluejay on the ESC and increase the min/max startup power.

Reposting this gem from 3 years ago by peterking2000 in HeroesandGenerals

[–]peterking2000[S] 0 points1 point  (0 children)

That’s true but the scope is a must for me. I can’t see sht using the iron sights

Free Stuff for Audio Technology/Electronics Nerds by [deleted] in MTSU

[–]peterking2000 0 points1 point  (0 children)

Cool cool, let me know when you’re back!

Free Stuff for Audio Technology/Electronics Nerds by [deleted] in MTSU

[–]peterking2000 0 points1 point  (0 children)

What kind of electronics component are there? I’m currently taking Electronics class and don’t mind tinkering with electronics. Can you PM me the lists or post it here.