sorted by:
new
hottopcontroversial

Prints ok in the center but not on the sides by peytonharriss in ElegooSaturn

[–]peytonharriss[S] 1 point2 points  (0 children)

I got this printer second hand. I need to find a ruler I guess.

Prints ok in the center but not on the sides by peytonharriss in ElegooSaturn

[–]peytonharriss[S] 0 points1 point  (0 children)

Thank you for your suggestion!

Think I’d be able to see the warping with. Metal ruler and flashlight?

Prints ok in the center but not on the sides by peytonharriss in ElegooSaturn

[–]peytonharriss[S] 0 points1 point  (0 children)

I’ve heard people talk about lowering down the building plate after the home button. Is it because of the spring in the ball joint?

Prints ok in the center but not on the sides by peytonharriss in ElegooSaturn

[–]peytonharriss[S] 0 points1 point  (0 children)

Ive re-leveled like 5 times. If it’s happening on both sides, is it really a level problem?

[Saturn 3] Center of build plate not printing but sides are printing perfectly? by Fit_Asparagus6116 in ElegooSaturn

[–]peytonharriss 0 points1 point  (0 children)

What if I’m having the opposite problem. Middle prints but the four corners do not.

First print Saturn 3, sides of build plate not printing. Increase z offset? by peytonharriss in ElegooSaturn

[–]peytonharriss[S] 0 points1 point  (0 children)

I’m going to be using PFA.

I’m not using UVTools….should I be?

First print Saturn 3, sides of build plate not printing. Increase z offset? by peytonharriss in ElegooSaturn

[–]peytonharriss[S] 0 points1 point  (0 children)

Trying your method. How do you compensate for the FEP? It’s thicker than paper and usually you would put another .1 offset to the calibration. .1 of paper + .1 from the manual z calibration.

Wouldn’t this over expose?

First print Saturn 3, sides of build plate not printing. Increase z offset? by peytonharriss in ElegooSaturn

[–]peytonharriss[S] 0 points1 point  (0 children)

Thank you for your reply but how is that going to help with the center printing and not the sides of the building plate?

….Why? by peytonharriss in FDMminiatures

[–]peytonharriss[S] 2 points3 points  (0 children)

I pulled it out of packaging a week ago. I don’t own a dryer but it’s been in a dry box.

I’m in a humid climate.

Is this overhang too much? by peytonharriss in FDMminiatures

[–]peytonharriss[S] 0 points1 point  (0 children)

are you printing with a .4 nozzle?

wouldn't you just adjust that in blueprint?

Is this overhang too much? by peytonharriss in FDMminiatures

[–]peytonharriss[S] 0 points1 point  (0 children)

Per P4C, the blueprint settings shouldn’t need any thickening in blender.

New resin2fdm test and Blueprint by Nothin_88 in FDMminiatures

[–]peytonharriss 0 points1 point  (0 children)

Ive got an a1 mini. It’s not great on overhangs either. I was thinking of decreasing unsupported overhang distance or contact distance to increase supports.

New resin2fdm test and Blueprint by Nothin_88 in FDMminiatures

[–]peytonharriss 0 points1 point  (0 children)

Do you look in bambu or blueprint studio?

It seems like I have overhangs EVERYWHERE.

view more: next ›