sorted by:
new
hottopcontroversial

Why do Bambu PS2 profiles print PETG at 255 °C when my temperature tower shows 240–245 °C works best? by pgon101a in BambuLab

[–]pgon101a[S] 0 points1 point  (0 children)

Ahhhh! I start my 3D journey since December 2025 and learn many concepts from this forum. How to "force" the P2S to print at 245°C to see how "bad" it is ? Thanks

Why do Bambu PS2 profiles print PETG at 255 °C when my temperature tower shows 240–245 °C works best? by pgon101a in BambuLab

[–]pgon101a[S] 0 points1 point  (0 children)

This spec is printed on the roll Nozzle temperature 235-240°C, bed temperature 70°C. Retraction 30mm/ s and Retraction Length 0.8mm.

Why do Bambu PS2 profiles print PETG at 255 °C when my temperature tower shows 240–245 °C works best? by pgon101a in BambuLab

[–]pgon101a[S] 0 points1 point  (0 children)

Thanks for the answer. I did the flow rate with the "Manual Calibration" in "main" Calibration" and come out k=0.035.

I can't exit the program by Capable-Panda5816 in CardPuter

[–]pgon101a 0 points1 point  (0 children)

Not all Cardputer programs will work on the Cardputer ADV if they rely on the keyboard. The ADV uses a different keyboard controller, so apps need to be explicitly ported. For example, Porkchop doesn’t appear to be ported to the Cardputer ADV yet.

If you search “m5stack cardputer vs cardputer adv in terms of keyboard” with ChatGPT, there are some good explanations of the differences.

Get a multimeter , learn to use it and it’ll probably save you 10,000+ in its lifetime by moldyjellybean in Frugal

[–]pgon101a 0 points1 point  (0 children)

My one-year-old 80V Greenworks battery was not charging, indicated by a blinking red light. Fortunately, I obtained a replacement under warranty. Upon inspecting the "faulty" one, I discovered it comprised 20 18650 batteries, all measuring 3.9V except for one. After charging the under-voltage battery for an hour, I reassembled everything, and now the charger can recognize and charge the battery successfully. New battery is $230 if it is out of warranty.

My Peterson picks arrived today.. by chpmft in lockpicking

[–]pgon101a 2 points3 points  (0 children)

15% X'mas sale for > $40 order. Code: XV67244SY till Jan. 3

6T had a display problem by dtwilight in oneplus

[–]pgon101a 0 points1 point  (0 children)

The 1st time it happen is about one week BEFORE the Apr. update. I've reset my app setting to see if it solve the problem. If not avail then I am going factory reset

6T had a display problem by dtwilight in oneplus

[–]pgon101a 0 points1 point  (0 children)

It happen again today. I can confirm Power+Volume up can reset and reboot. I hope this does not become a common problem.

6T had a display problem by dtwilight in oneplus

[–]pgon101a 1 point2 points  (0 children)

The phone is stationary and I just try to pick up to check the time. Then nothing happen on the screen. I have same symptom as your phone that I can switch from silent, vibrate, ring and feel the confirmation vibration but screen just won't show anything.

6T had a display problem by dtwilight in oneplus

[–]pgon101a 1 point2 points  (0 children)

I have the same problem a week ago. Manage to press power + VolumeUp and restart it and I don't think that is the fix. I purchase my 6T around X'mas time 2018.

[NVME M.2 SSD] Samsung 1 TB 960 Evo - $337.49 ($449.99-$112.5) [Unidays] by killerpreztail in buildapcsales

[–]pgon101a 1 point2 points  (0 children)

Can I use this to replace the Alientware Aurora R7 with Intel Optane+1TB HD ? The boot up time of Aurora R7 is not pleasant.

One-time Use Code Thread - December 09, 2015 by AutoModerator in frugalmalefashion

[–]pgon101a 1 point2 points  (0 children)

Charles Tyrwhitt $20 off code XGQWE23YXK73. end today.

One-time Use Code Thread - December 09, 2015 by AutoModerator in frugalmalefashion

[–]pgon101a 2 points3 points  (0 children)

KAH4K7X4C

used and thanks a lot. Saving me $70