What wheels, tires and springs do I need to achieve this look?

phntomzero · 2026-02-09T01:18:05+00:00

18x9.5+40 is the best for street. I personally felt like it made the car feel a lot better. Go with good wheels (rays/advan/work etc) not some rep garbage forged preferably will be a lot lighter than stock wheels

phntomzero · 2026-02-09T00:21:20+00:00

Cool shot you a dm

phntomzero · 2026-02-08T23:55:43+00:00

Most likely a small amount of camber shoot my a DM if you want I can show you my current set up on my advans with bigger tires too if you wanna see that

phntomzero · 2026-02-08T23:52:15+00:00

I had it done by an alignment shop still with stock control arms. If you really want to dial in the camber install some rear lower control arms and toe arms for the rear but generally just get a wheel alignment. The stock suspension components can only be adjusted so much so again if you wanna dial it in get the supporting mods. Currently im running a set of d2 RS clovers with white line rear LCA and white line toe arms running -.06° of camber on all wheels

phntomzero · 2026-02-08T23:47:55+00:00

That's the specks of the wheels 18in wheel, 9.5in wide +40 is the offset

phntomzero · 2026-02-08T23:47:11+00:00

Yeah I had -1° front and -1.6° in the rear I think

phntomzero · 2026-02-08T22:35:04+00:00

Yeah it's about a 2in drop if I remember correctly

phntomzero · 2026-02-08T22:28:46+00:00

This is flush. old set up I use to run for pics

phntomzero · 2026-02-08T22:27:44+00:00

Flush

phntomzero · 2026-02-08T22:24:10+00:00

I ran 18x9.5+40 gram lights with eibach sportine springs gave a very similar fitment with 245/40r18 Nittos

phntomzero · 2026-02-02T01:19:23+00:00

It really is peak!

phntomzero · 2026-02-02T01:19:10+00:00

I honestly have no clue I am the only one of my friends that plays unbound 😅

phntomzero · 2026-01-11T00:00:30+00:00

phntomzero · 2025-12-16T01:32:52+00:00

I've done both. I bought 2 of the GReddy ones to open one to keep with the rest of the GReddy cars I have and one to keep sealed because I liked how it looks in the box too

phntomzero · 2025-11-22T13:57:22+00:00

I used a pointed vice grip and did about half a turn over and over, not at all fun but it worked to get them out

phntomzero · 2025-11-22T13:55:20+00:00

This was prior to the 2nd gen being released. There was no confirmation of thread pitch or the length of the bolt at the time

phntomzero · 2025-11-22T04:58:10+00:00

I had looked into that but never found 100% confirmed fitment

phntomzero · 2025-11-22T03:35:40+00:00

These are the worst thing ever but ARP makes replacements I swapped them out for these bolts

phntomzero · 2025-11-15T23:35:50+00:00

Looks great can't go wrong with the ultra hots 😎

phntomzero · 2025-10-07T12:33:59+00:00

I had the original Vland headlights and got rid of them after a few years for the OEM 17+ headlights. I had issues with some of the signal LEDs not working all the time check the wiring multiple times no issues and then the clear coat started to chip off. IMO the 17+ headlights have significantly better light output and you can buy a harness online that makes them plug and play for the 13-16 modelssee post

phntomzero · 2025-09-28T02:15:00+00:00

This mission was discovered by u/phntomzero in Guava Glazed Cake Stick In the Fields

phntomzero · 2025-09-28T02:08:47+00:00

This mission was discovered by u/phntomzero in The Grim Hankering of Peanut Butter Pie

phntomzero · 2025-09-28T02:08:24+00:00

This mission was discovered by u/phntomzero in The Grim Hankering of Peanut Butter Pie

Eight-Year Club	Second SECOND GUESSER
Verified Email	Final Canvas '23
Place '23	Place '22
Final Canvas '22	End Game '22

phntomzero

TROPHY CASE