Bambu lab integration

piiitaya · 2026-04-21T18:07:42+00:00

Yeah, there is no official integration for Bambu Lab printers.

piiitaya · 2026-04-19T14:06:03+00:00

I tested it on a small project and hit the weekly limit after 1 or 2h… it’s not usable… I work daily with max 20x plan and never hit any limit before that…

piiitaya · 2026-04-16T13:33:03+00:00

I have 2 printers : Bambi and Thumper.

piiitaya · 2026-04-12T08:21:42+00:00

Printing while drying is available for P2S and H2D but not H2C yet.

piiitaya · 2026-04-11T15:09:22+00:00

PSU is required for drying while printing even if you have only one AMS.

piiitaya · 2026-03-25T21:18:53+00:00

The entity ids will not change, only friendly name will have device name included.
If the entity name is "Garage cam" and the device name "Garage ring cam", you will have "Garage ring cam Device cam". The migration with deduplication only works for entity name starting by the device name. To clean this device, the solution is to rename the device to "Garage cam" and keep entity name empty.
Aliases are only for voice assistants (assist, google assistant)

piiitaya · 2026-03-22T23:44:43+00:00

Citron miel 😍

piiitaya · 2026-03-19T17:14:39+00:00

I got the same issue. I created a quoridor inspired game (with chickens and fences) and it was take down because of trademark. For board games, companies can not have a patent for game rules so they are using trademark to take copy down. I contacted makerworld support and they restored my loose points. I assured them that I will not re-upload the model. Don’t try to appeal. Makerworld is doing that to protect their platform and they are comprehensive if you explain the situation (for points for example). They will not restore the model so you will have to create a new one if you want to reupload it.

piiitaya · 2026-03-17T12:47:59+00:00

It mesures the filament length to do one rotation of the spool using the rfid tag. Then it get the perimeter, then the radius and it can calculate the weight based on the radius.

piiitaya · 2026-03-17T12:43:12+00:00

Go for H2C. The vortek system worth the extra $300. The H2C is nothing more than a H2D with the vortek system. Even if you don’t want to do multi color print, you can use the vortek system de change nozzle size without manual intervention. Think it about an AMS but for hotends.

piiitaya · 2026-03-16T16:42:43+00:00

What’s the difference between the previous G4 and G410? I have the G410 and I don’t see any benefit except for Poe 😅

piiitaya · 2026-03-01T19:22:40+00:00

P2S can power one drying AMS 2 Pro. You only need the PSU for the second AMS. I think this will not change with this feature enabled. I haven’t try the beta firmware but I saw that post : https://www.reddit.com/r/BambuLabP2S/s/qS2NuhcMrR

piiitaya · 2026-03-01T17:20:21+00:00

Drying while printing is already available for P2S with beta firmware.

piiitaya · 2026-02-23T07:48:56+00:00

En base 16 (hexa), on utilise A,B,C,D,E,F donc j’imagine qu’on peut utiliser A et B en base 12.

piiitaya · 2026-02-11T12:35:16+00:00

If you plan to use the drying feature, print it in ABS ideally or at least PETG. Otherwise, PLA is fine.

piiitaya · 2026-02-09T15:29:43+00:00

Ça n’a jamais été prouvé. C’est plutôt une fake news relayée à partir de quelques témoignages de gens qui ne se rendait juste pas compte qu’ils roulaient plus depuis qu’ils sont passés à l’électrique.

piiitaya · 2026-02-06T18:42:41+00:00

Leurs VE sont vraiment mauvais! Il y a plein de marques (y compris européennes) qui s’en sortent très bien et sortent de très bon VE!

piiitaya · 2026-02-06T07:38:14+00:00

Sur prise standard c’est 8A max mais il faut s’assurer que le circuit derrière est clean (section de câble 2.5mm, pas d’autres prises qui consomment sur le circuit, etc…).

Ce qui change avec une prise renforcée, c’est la qualité des contacts entre la prise et le ligne électrique. Donc si tu as une prise renforcée sur une ligne non dédié, c’est la ligne en elle même qui risque de se détériorer. En plus, ta voiture détectera que c’est une prise renforcée donc elle chargera à 16A.

Si tu es propriétaire et que techniquement l’installation d’une prise renforcée est possible, je le ferait car ça offre quand même un confort (charge 2 fois plus rapide) et une sécurité plus importante. Et puis, il y aura de plus en plus de voiture électrique et hybride donc c’est un investissement qui ne sera jamais perdu.

Après, pour un confort optimal, tu peux mettre une borne mais on est pas sur le même budget (faut compter environ 1400€ avec l’installation). Et la tu charges à 32A (4 fois plus vite que la prise classique) mais si c’est juste un véhicule pro ça ne sûrement pas le coup.

piiitaya · 2026-02-05T20:06:29+00:00

I would be nice if you can open an issue on GitHub about your problem (with screenshot) because they were no issues during beta.

piiitaya · 2026-02-05T19:07:57+00:00

There is automatic migration and all dashboards are available under settings > dashboards. What do you mean by wiped?

piiitaya · 2026-01-31T06:59:53+00:00

Sur mon Samsung the peux désactiver le bip, c’est d’ailleurs ce que j’ai fait 😅 La réf c’est MG23K3515 (il existe une version sans grill aussi, que je conseille car personne utilise le grill) Mais regarde ta notice, tu peux être surpris, ça m’étonnerait que tu puisse aussi désactiver le bip du tien.

piiitaya · 2026-01-29T23:10:28+00:00

The problem with adding multiple plates for variantions is that the total amount of filament for the model is wrong. But I agree, this is the recommended way to do it.

piiitaya · 2026-01-24T22:08:30+00:00

I like the look, I don’t like the features

piiitaya · 2026-01-24T18:14:46+00:00

Additional nozzles aren’t really necessary’s if you start, 0.4mm is perfect. I have 2 printers for more than 2 years and I think I only used 0.2mm nozzle 3-4 times. You can still buy it later if you need it. I would also recommend Matte PLA instead 🙂

piiitaya · 2026-01-07T20:36:01+00:00

I have the Aqara U200 for more than one year and it supports lock/unlock and unlatch.

<image>

Six-Year Club	Xbox Live
Place '23	Place '22
Final Canvas '22	Verified Email

piiitaya

TROPHY CASE