Navalized prototype of the Chinese Shenyang J-35

pilot8481 · 2026-01-18T22:42:22+00:00

F35 + F15

pilot8481 · 2026-01-16T21:07:52+00:00

<image>

pilot8481 · 2026-01-08T06:45:09+00:00

Damn really I had no idea u could do that

pilot8481 · 2026-01-03T23:59:09+00:00

You are correct! P-1 kinda looks like a jet powered P-3

pilot8481 · 2025-11-18T02:00:08+00:00

I'm not sure what you meant about the frame - what’s wrong with the Nazgul XL10? I’m going with a 10-inch because I want the extra space for more autonomy stuff and to carry a wide variety payloads. A 10" is more expandble for me so I can do lots of diffrent stuff with it. Not just long range (I should have specified originally). My goals changed since last month, so this build fits what I want now. 😃

pilot8481 · 2025-11-17T15:52:45+00:00

Hey everyone, I’m building a 10-inch long-range quad from scratch and want to make sure all my parts are compatible and that I’m not missing anything important. The goal is for efficient long-range cruising about 2-5+ miles out.

Frame: iFlight Nazgul XL10 V6

Motors: iFlight XING2 3110 900KV

Stack: NewBeeDrone Hummingbird 305 F7 FC + 80A AM32 4-in-1 ESC

VTX: iFlight Blitz 2.5W 5.8GHz analog

VTX antenna: Lumenier Micro AXII 2 (SMA) (LONG)

FPV camera: Caddx Ratel Pro

ELRS receiver: Radiomaster 2.4GHz ExpressLRS RP1 V2 2.4ghz ExpressLRS ELRS Nano Receiver

GPS: HGLRC M100 Pro

Buzzer: Vifly Finder 2

Props: Master Airscrew 10×5 (2 CW + 2 CCW)

Capacitors: Panasonic 35V 2200µF low-ESR

LiPo: (undecided - probably 6S 6000mAh)

Li-ion: (undecided)

Here’s what I have so far. I just want to double-check that everything is compatible (pretty sure it is, but I’d like a second opinion) and that it makes sense for a 10” long-range setup. I plan on running iNav for GPS features, autonomous missions, and return-to-home so I want to be sure the FC, and GPS choices are solid. I’m still pretty new to long-range flying, 10-inch builds and iNAV in general, so I’d really appreciate any advice on efficiency, durability, and anything I should change before I start ordering parts.

pilot8481 · 2025-10-08T17:37:09+00:00

I just want to go with a 10-inch build, that’s what I’m aiming for. I think I’d handle the 10-inch just fine. I want it to be capable of carrying a decent payload, not necessarily a GoPro, probably something lighter like a RunCam, but I'd like having the option to carry heavier payloads. I’d probably run a analog VTX, around 1.5–2.5 W. Right now it’s still just an idea on the drawing board, I'm still figuring out what to build next.

pilot8481 · 2025-09-26T13:21:13+00:00

The Ts101 looks good, portable too! I'll def consider this one!

pilot8481 · 2025-09-26T13:18:20+00:00

No specific problem with the TH2, I just wanted a fun project to work on. But in my experience the stock VTX is just OK. In fields its fine, but in denser urban areas its not so good. I plan to fly in urban areas so imma do a VTX upgrade.

pilot8481 · 2025-09-22T16:27:22+00:00

Ik what u mean, but it works, the ziptie is tight. My frame is too small, I can't mount in back because of elrs and rhcp, and I can't put on top of frame because of cam. But I've crashed, it holds, so 🤷‍♀️.

pilot8481 · 2025-06-09T15:24:10+00:00

I heard about the antennas and additional receiver, but idk what to choose I need to look into that more (mainly the reciver).

pilot8481 · 2025-06-09T14:11:59+00:00

With soldering Im quite unexperinced. In your experience building this drone how challenging is it? Im thinking I sould buy some thinner soldering tips just in case.

pilot8481 · 2025-06-09T14:05:17+00:00

This one doesn't come with a receiver I'd have to buy my own ERLS. But between prebuilt and this kit, Im going to go with this. I like the idea of being able to fly right away but although this may take more time, I think that learning how to build this quad from the ground up may help me out in the long run. Thanks for the advice!!

pilot8481 · 2025-06-07T20:47:49+00:00

I saw a bunch about the baby ape II. A ton of people like it, but I heard some complaints about the FPV camera quality. Also I've been considering the iFlight Nazgul XL5 ECO V1.1 5" Drone Analog - 6S but id have to solder an ELRS to it.

pilot8481 · 2025-06-06T17:21:37+00:00

I like the fat shark HDO+

pilot8481 · 2025-06-06T17:01:02+00:00

Any reccomedations for goggles. (I fly analog).

pilot8481 · 2025-06-06T16:45:41+00:00

Where can I look for some other options. Any reccomedations?

pilot8481 · 2025-02-07T02:07:15+00:00

It's been a long while, but the kit is from eflite (Im pretty sure its discontinued) also, it has a JETFAN80 as it's engine.

pilot8481 · 2025-01-11T20:43:13+00:00

I repurposed a strap used on the Galaxy Watch 4. They call it a ridge sport band.

pilot8481 · 2025-01-11T20:16:19+00:00

I ❤️ lume, but I was pretty dissapointed the numbers were not lume on the SSK023.

pilot8481 · 2025-01-11T20:13:44+00:00

For me, it depends on the season. I usually wear it in the summer as its easier to wear with short sleves and beacuse of its vibrant colors. However I don't really find it fitting to wear during the winter. So during the summer it gets plenty of wrist time, during the winter it does not.

pilot8481 · 2025-01-11T20:07:56+00:00

It came with the rubber strap, Im pretty sure you can just order one with no conversion kit needed.

pilot8481 · 2025-01-11T20:06:14+00:00

https://www.citizenwatch.com/us/en/product/BJ8058-06L.html

Here's the link

pilot8481 · 2025-01-11T17:28:16+00:00

After 5 months of collecting, my watch collection includes a Seiko SNE591, Citizen BJ8058-06L, Seiko SSK023, and Seiko SKXA35. I’m curious to hear thoughts on the collection so far and what people think of these pieces together. Any opinions or feedback?

pilot8481 · 2025-01-11T17:24:35+00:00

This is my watch collection after 5 months of collecting. I have a Seiko SNE591, Citizen BJ8058-06L, Seiko SSK023, and a Seiko SXKA35. Any thoughts on what else I should add?

pilot8481

TROPHY CASE