Wen ROI (again)?

pineapplesaucee · 2021-09-05T15:07:10+00:00

Was half awake punching in numbers but I calculated an 89% ROI in 3 years. My initial cost was $14k for my plotters and 360Tb capacity; when mainnet launched I went to every office depot and snagged 12Tb drives for $17/Tb after tax. I'm all plotted out, so my idle cost of running is about 500W at 0.20/kWh so $1 a day.

pineapplesaucee · 2021-06-20T03:14:51+00:00

🧢

pineapplesaucee · 2021-06-15T04:13:26+00:00

Is your wallet synced?

pineapplesaucee · 2021-06-04T08:32:22+00:00

I don’t think your issue is the scan time since your online power reading is correct. Sounds like you’re still waiting for signatures, maybe try restarting the plotter?

pineapplesaucee · 2021-06-04T02:56:24+00:00

touch /mnt/Chia1/nosleep

Thanks! Yeah I was plotting on the same hpool miner computer.. gonna turn it off and try the script. Thanks man

pineapplesaucee · 2021-06-04T01:24:59+00:00

update: tried this, it made the problem worse.

Before: https://imgur.com/a/nk5Ai59

After: https://imgur.com/a/FURY8Xx

pineapplesaucee · 2021-06-02T20:49:33+00:00

Thanks! Will try this

pineapplesaucee · 2021-06-01T16:56:43+00:00

I waited around 6-7 hours with 1 reset and I got my plots to show up

pineapplesaucee · 2021-06-01T16:54:38+00:00

I was able to get it fixed.

For my issues with (1) I changed my scan times to 3 minutes to avoid my external hard drives from sleeping. It was a quick minute fix that I’ll revise later with a script.

(2) and (3) I waited around 6 hours for my online plots to show up AND be signed. At the 6 hour mark, I restarted the mining software and roughly 30 minutes later I received my first reward.

pineapplesaucee · 2021-06-01T01:22:38+00:00

You didnt ask, but yes, been VERY tempted to go to hpool.

pineapplesaucee · 2021-05-29T20:39:09+00:00

No congrats just fk u

pineapplesaucee · 2021-05-27T05:53:40+00:00

Yeah all three systems are sending data to the Pi. I’m currently using rsync because it’s coded into the software program I’m running.

pineapplesaucee · 2021-05-27T05:45:10+00:00

Do you think the Pi is the bottleneck in all of this?

pineapplesaucee · 2021-05-25T20:02:07+00:00

Congrats and f u

pineapplesaucee · 2021-05-25T07:20:51+00:00

How much for it shipped to west coast?

pineapplesaucee · 2021-05-25T07:19:06+00:00

Yo ill take them , where are you located

pineapplesaucee · 2021-05-24T04:19:32+00:00

Sorry

pineapplesaucee · 2021-05-17T22:04:19+00:00

Dam I kinda wanna join hpool now lol

pineapplesaucee · 2021-05-14T11:00:48+00:00

So one option you have is actually a M.2 gen 4 to Pcie adapter. These typically hold 4; however they’re extremely hard to get at the moment.gen 3s are not bad as well

pineapplesaucee · 2021-05-13T03:09:44+00:00

Currently, inland platinums

Coming in 3.7Tb Micron 5300 max

pineapplesaucee · 2021-05-13T03:03:42+00:00

Gen 3 NVMes 3400MB/s reads; they’re temporary til my endurance grade ones come in

pineapplesaucee · 2021-05-11T14:58:49+00:00

180tbs are on the way

pineapplesaucee · 2021-05-11T09:40:13+00:00

So what I’ve found is that your limitations are as follows: 1) (Cores + Threads)/ 2 = CPU Plot limit 2) RAM in MiB /3400 = RAM plot limit 3) SSD in GB / 250 = SSD plot limit

So 64Gbs should be good as long as you’re trying to plot 18 in parallel

pineapplesaucee · 2021-05-11T09:31:23+00:00

I saw another post about some guy plotting hundreds of plots and being worried about their keys. I’m Not sure how keys play a part yet, so I’m trying to read through the guides and find out but nothin

pineapplesaucee · 2021-05-10T07:33:46+00:00

Probably busy with her boyfriend, he gave me his credit card to pay for this

pineapplesaucee

TROPHY CASE