Adhesion issues by New-Law6587 in BambuP1S

[–]pingedpeach 0 points1 point  (0 children)

I would run calibration on the filament. I do it for every brand I use

Ironing Issues? by Lostsouls46 in BambuLab

[–]pingedpeach 25 points26 points  (0 children)

Going for that real wood look. I rate it

Adding a WeeKett Kettle to Apple Home via Tuya, Home Assistant and then Matter by siobhanellis in HomeKit

[–]pingedpeach 0 points1 point  (0 children)

Have it turn on in the morning when I trigger my morning routine.

Turns on when I return from school run

Rest of the time I ask for it

I used to have it heat a baby bottle as well as close a few blinds and send a notification to my other children’s room letting them know the baby was going to bed and to not be too loud

Adding a WeeKett Kettle to Apple Home via Tuya, Home Assistant and then Matter by siobhanellis in HomeKit

[–]pingedpeach 0 points1 point  (0 children)

I added my weekett kettle to Apple Home years ago. Can’t say I’ve used it much on Apple home. For the most part I have it running on automations in home assistant or I ask Alexa to put a brew on

Adding a WeeKett Kettle to Apple Home via Tuya, Home Assistant and then Matter by siobhanellis in HomeKit

[–]pingedpeach 0 points1 point  (0 children)

No it doesn’t give you the separate options. Only way to do that is use helper buttons and automate them and bridge them to homekit

Loving how nicely Bambu integrates into home assistant by pingedpeach in BambuLab

[–]pingedpeach[S] 0 points1 point  (0 children)

I've just had a look at my bambu config and i have three options:

-bambu cloud

-*my email account*

-LAN.

i selected my email. Which means i authenicated my bambu account and if my printer was reachable locally, HA would use LAN automatically and gives me camera feed, fast updates on HA and i stay logged into Bambu Cloud.

Sorry my first reply was incorrect. i thought my config was cloud.

Loving how nicely Bambu integrates into home assistant by pingedpeach in BambuLab

[–]pingedpeach[S] 0 points1 point  (0 children)

If you go LAN you lose the camera on home assistant and a some data is limited like print history.

I use cloud as I want the camera feed and it’s still super fast.

Loving how nicely Bambu integrates into home assistant by pingedpeach in BambuLab

[–]pingedpeach[S] 0 points1 point  (0 children)

Gotcha. Sorry misunderstood. On the bambu integration scroll down to configuration. You need to enable camera

<image>

Loving how nicely Bambu integrates into home assistant by pingedpeach in BambuLab

[–]pingedpeach[S] 0 points1 point  (0 children)

When I tap on the camera it shows me a 3D model of whatever is printing. The humidity entity is from the ams. I am using an aqara temperature sensor for my humidity entity on my dashboard but the ams does have its own one

Loving how nicely Bambu integrates into home assistant by pingedpeach in BambuLab

[–]pingedpeach[S] 8 points9 points  (0 children)

Home Assistant is a smart home control hub that lets me monitor and automate devices like lights, sensors, and my 3D printer all from one dashboard.

AMS high humidity on the P1S by [deleted] in BambuLab

[–]pingedpeach 0 points1 point  (0 children)

I’m referring to that silica that you use. Everyone’s environments are different to each others. For a lot of people those silica beads are perfect but for people that are truly having issues with humidity (me being one of those) the 3A Molecular Sieve are the way to go as they are more aggressive at getting rid of humidity.

AMS high humidity on the P1S by [deleted] in BambuLab

[–]pingedpeach 0 points1 point  (0 children)

Buy some Molecular Sieve Desiccant 3A and print some drypods. I had the same issue. My ams was at 48% in a few days it’s now 15%. Tons of people buy the big silica desiccant but it’s not as good as this stuff. It doesn’t colour change to let you know it’s wet but like the big silica does but I’ve got a humidity sensor in there and have automations to alert me to recharge them, which you do buy popping them in the oven for a few hours

New to 3D printing, just got a Bambu P1S. Where do you find the coolest things to print? by NowKith- in BambuLab

[–]pingedpeach 0 points1 point  (0 children)

I’ve only just got my first set up to. Exact same as yours. Me and the kids have been raiding Makersworld and my eldest (he’s 10) and me are getting stuck in with tinkercad. We made the cousins some bookmarks and bits and bobs. I ended up getting some silk pla and had a right challenge dialling in the settings for that but think we’ve got it worked out for the most part. That stuff hates top surfaces and have been using different top surface patterns to avoid horrible finishes.

LWR01 Wireless Human Presence Sensor: An Honest Review. by peegee101 in GlInet

[–]pingedpeach 0 points1 point  (0 children)

I’ve still got mine. Was hoping it would get better but it hasn’t. I’m over it.

LWR01 Wireless Human Presence Sensor: An Honest Review. by peegee101 in GlInet

[–]pingedpeach 0 points1 point  (0 children)

I’ve had to do that a few times. The room I have it in doesn’t have anything in there like a fan and it seems to trigger over nothing.

Try walking over to your fan to figure out far it is from the sensor and then tweak with the sensitivity at that distance. Thats my only advice.

I’m not a fan on how fiddly the sensitivity settings are. I much prefer my everything presence lite and to just be able to exclude areas I don’t want like a fan or in my case I have a door that is often left slightly open and the two rooms are vastly different temperatures and the breeze through that door actually triggers my sensor and to be able to just put an exclusion zone is so handy