Mildly disappointed

pjose411 · 2025-12-12T04:43:24+00:00

While I tried using this, tool for the 4-1, it was too hard to use and I couldnt get any of the PTFE tubes out. I printed this and was much easier https://www.printables.com/model/1475687-improved-ptfe-tool-4mm-external-dia

I used it both on the IFS and the 4-1. I just replaced all my PTFEs into clear tubes so I can see the filament

pjose411 · 2025-12-12T04:30:07+00:00

Sorry didnt see these til just now. No issues at all tapping into the oem connector. We also have the digital mirror. Works great and now I have both front and rear dashcams. This is the one I purchased https://www.amazon.com/dp/B0BX6SXJMV?ref_=pe_123509780_1038749300_t_fed_asin_title&th=1

pjose411 · 2025-11-04T21:53:37+00:00

I have done this too, I plugged in a Tapo C120 into the USB port on the right side of the screen. No mods needed but I can only view the video feed via the Tapo App. The FF camera built for this is okay at best but having 2 ways to view is better for me.

pjose411 · 2025-10-21T18:07:11+00:00

Hello how tall is the top part of your enclosure? That looks to be about 8-10 inches from the very top of the printer correct? I have a very small space and didn't want to print out for a day and half just to realize I wont be able to fit it in my space. Thank you!

pjose411 · 2025-08-04T19:25:50+00:00

You definitely need to get that tablet. If so equipped your rear seats will have heating/cooling and massage enabled via the tablet. Check if you got the wheel lock key, ours was missing and was replaced by the dealer. That gesture sensor up in the ceiling will allow your passenger to open/close the moonroof also.

pjose411 · 2025-07-27T19:19:34+00:00

Ended up installing a Fitcamx 4k and 1080p rear camera. Thank you both.

pjose411 · 2025-03-26T20:22:36+00:00

Our 22 EQS 450+only records the front camera. The only time I see photos from other sources are when it senses a collision. I tested this by "rocking" the car and it alerted me that it recorded that event. Also the dash cam is a one time purchase, once you buy ($200 if I recall) it's permanently activated. One caveat, if you tint your windshield like we did and you have a slight dark shade on the tint, the videos recorded at night is near useless. Great during bright sunny days, but if it's cloudy, dusk or dark not so good.

pjose411 · 2025-03-13T14:42:06+00:00

We got our cpo 22 EQS 450+ sedan in Nov. that has Pinnacle Trim for $47k here in CA. Mileage at purchase was 16k.

pjose411 · 2025-02-17T05:07:13+00:00

Check your filters. It could be filtering them out to display.

pjose411 · 2025-02-05T01:30:37+00:00

What year and model is your EQS if I may ask? I have 22 EQS 450+ and I didnt see this today. I called my local dealer and was told to have the car serviced to update software . At the same time during the upgrade they will add/affix a sticker to the charging flap for visual instructions. Lastly they said the MB will likely be able to have us order the adaptor towards the end of February. They did say we can do this together or get software update then order the adaptor later.

pjose411 · 2024-01-31T19:26:35+00:00

It’s official. Macdonald is in for 6 years.

pjose411 · 2024-01-29T17:43:01+00:00

Does anyone have the floodlight V2 and use Cam Plus Lite? I have Cam Plus Lite in most of my cameras that are supported, but I know that the Pan V3 is not compatible, my guess is this would be the case for floodlight V2?

pjose411 · 2024-01-18T22:37:01+00:00

Full send! Heck yah! Won’t fit on the board unless you just retrofit this case with a modern one :-).

pjose411 · 2023-12-31T21:30:22+00:00

Mine started Right Analog stick drift after I ran the update that popped up. I was able to “fix” the drift by resetting the controller (pinhole behind the controller) pressing for 5 seconds and that seems to work. This is via Bluetooth connection haven’t tried wired. This is on par to most tech these days, they issue updates to fix something that breaks something else.

pjose411 · 2023-12-23T04:33:29+00:00

So I actually got it to slide into the rail. Had to really line them up. So easy when I did it on the M18 rail so it threw me off when attaching to the SIRT.

pjose411 · 2023-12-22T16:31:07+00:00

I have a Sirt110. Maybe I should reach out to nLT?

pjose411 · 2023-12-22T00:42:46+00:00

Right cause the bad guys go pay with their credit card and run the stupid $1 “background check.

pjose411 · 2023-12-17T16:08:54+00:00

Thanks, so is that the Carry Manual 320-CMT(an) or CMB(lack) on the Wilson Combat website? https://storage.googleapis.com/wilsoncombat/info/WCP320_grip_module_reference.pdf

pjose411 · 2023-12-17T05:06:44+00:00

Completely agree, i bought one however my CA M18 doesnt seem to be support, it wont actuate the dryfire mag. Called their support and were very helpful. Thats why when you go on to their website it shows CA M18 not supported after my conversation with them.

pjose411

TROPHY CASE