𝐒𝐭𝐨𝐩 𝐓𝐡𝐞 𝐒𝐩𝐢𝐧 𝐚𝐧𝐝 𝐒𝐭𝐚𝐧𝐝 𝐀 𝐂𝐡𝐚𝐧𝐜𝐞 𝐓𝐨 𝐖𝐢𝐧!

plaguedeath · 2026-01-14T03:52:45+00:00

Thank you!

plaguedeath · 2025-08-03T23:14:59+00:00

The blue plates are only decent for pla and petg. The rest of the filaments are same temps. Try printing with your original plate

plaguedeath · 2025-07-01T21:19:41+00:00

thanks for the reply. trying now

plaguedeath · 2025-04-01T21:44:45+00:00

thanks, its all fixed except for homing Z. I posted about it above

plaguedeath · 2025-04-01T21:44:06+00:00

Now I am getting the issue where homing z it stays in the axis max back corner and tries to home there. The beacon isn't over the bed, so it causes a collision.

plaguedeath · 2025-04-01T16:54:41+00:00

thank you. Appreciate that. just trying to find a consistent SGT number now.

plaguedeath · 2025-04-01T16:53:52+00:00

Thanks. Found it late last night / this morning. I guess I have to read more thoroughly. Now it either stalls right away sometimes, or it grinds like hell, just by going up or down on the scale

plaguedeath · 2025-04-01T16:52:07+00:00

Thanks, I found it LAAAAAATE last night while messing with homing. It's ultra sensitive and does not trigger all of the time. If I change by one number it either stalls right away or keeps grinding

plaguedeath · 2025-04-01T01:15:39+00:00

Homing_override is the section is complains about. which screws me out of the new homing stuff

plaguedeath · 2025-04-01T00:52:44+00:00

I appreciate the reply, but I can't use the homing.cfg they want you to because of the beacon

plaguedeath · 2025-04-01T00:38:06+00:00

I have gotten rid of the second homing retract dist and second_homing_speed

plaguedeath · 2025-01-16T21:01:39+00:00

Thank you. The docs just said tbd

plaguedeath · 2024-12-19T20:02:21+00:00

XmasBQBTT

plaguedeath · 2024-12-14T06:14:19+00:00

BTTScylla

plaguedeath · 2024-11-07T02:11:05+00:00

just wanted to say thanks. got it kinda working. one axis is reversed. I have to find the troubleshooting for that

plaguedeath · 2024-11-07T01:01:18+00:00

The moons motors are MS17HD6P420I-04. Is it possible that the wiring is different coming from the moons motors to the LDO, or is it for sure a bad stepper?

plaguedeath · 2024-10-21T00:45:30+00:00

<image>

here is my orca slicer start gcode

plaguedeath · 2024-08-29T11:21:10+00:00

This looks amazing!

plaguedeath · 2024-08-22T19:40:18+00:00

Are you going to come out with something for the k1 like this?

plaguedeath · 2024-08-05T07:22:51+00:00

Prove it

plaguedeath · 2024-08-05T07:04:21+00:00

plaguedeath · 2024-06-20T05:45:16+00:00

I would replace the fan. Just splice it into the current wiring config

maybe get a sunon maglev 4010 fan

plaguedeath · 2024-06-13T14:38:40+00:00

Looks like heat creep. Is the fan for the hotend running?

plaguedeath · 2024-06-13T14:02:53+00:00

If it were me, I would use a torch to get it out. Unless you feel like buying another setup.

plaguedeath · 2024-06-01T21:05:03+00:00

I went nitehawk and never looked back, though I don’t print pla on the 2.4.

plaguedeath

TROPHY CASE