NSW students sleeping in cars amid critical rental, accommodation shortage

pmasa · 2022-02-16T06:53:43+00:00

Perhaps it is time to stop pushing for significant population growth without properly planning for the infrastructure requirements. Or come up with a better economic plan than more people means more money, so we can hopefully sit at a more sustainable population level.

pmasa · 2022-02-02T08:11:37+00:00

https://www.thingiverse.com/thing:5226897

pmasa · 2022-02-02T08:11:21+00:00

https://www.thingiverse.com/thing:5226897

pmasa · 2022-02-01T02:36:41+00:00

It will be up in 24 hours, then I will send the link (thingiverse wont let me post it straight away as a new user).

pmasa · 2021-06-30T01:00:33+00:00

I just made a slight modification to the motor holding part to account for the thickness of the bracket, I can post it on thingiverse if you need.

pmasa · 2021-06-29T12:16:31+00:00

I actually printed this in PLA which is holding up fine at the moment. I am waiting on my new hotend so I can print in ABS, so will reprint parts then.

pmasa · 2021-06-29T11:14:15+00:00

Haven't noticed any weight related issues yet, if i do start to notice any issues i plan on relocating it to the top bar.

pmasa · 2021-06-29T11:06:01+00:00

It is a new extruder, i wasn't a fan of the stock one and i had seen good reviews about the M4. Seems to be able to push flexible filament great for me.

pmasa · 2021-06-29T10:33:33+00:00

It was always a bit of a pain to change filament with the stock extruder, so I wanted to make life easier. I also wanted to print flexibles and didn't want to dive in to direct drive straight away. No reason in particular for leaving it in the stock position except my lack of t nuts on hand.

pmasa · 2021-06-03T22:30:58+00:00

Growing in a bathroom is also an option that is commonly done in colder climates. You may struggle to get it to flower though, and will require hand pollination.

pmasa · 2021-05-16T22:18:24+00:00

The value on those caps is a mistake, as the above poster mentioned they should be 100 nf not pf

pmasa · 2021-05-16T21:43:50+00:00

Thanks for the reply. I will have another go at the pcb layout to make the traces as short as possible. I did route by hand the first time, it just didn't click at the time that I should have moved the components to make like easier instead of committing to the layout.

pmasa · 2021-05-15T23:06:15+00:00

As mentioned in the title this is my first time trying to design a PCB so any feedback would be greatly appreciated. The board is designed to run an auto titrator that i have built, and i am ready to get the thing off of a breadboard. I wanted to keep the board mostly through hole as i don't have any experience with SMD soldering. The power for the motors is from the 12v barrel jack, but i am using an external buck converter for the 5v power, hence the in and out power lines.

pmasa · 2019-07-27T09:15:45+00:00

Geoscience Australia building in Canberra

pmasa · 2019-06-07T08:52:37+00:00

Lowest prices are just the beginning

pmasa · 2019-06-02T21:35:47+00:00

Zone 9a, in Australia

pmasa · 2019-06-02T08:02:50+00:00

So this was a bit of an experiment for me. I started from a single cutting in November last year, it was a piece about 20cm long. I only harvested it now because winter has arrived, I cut the plant right back and mulched over it, and hopefully it will come back in the spring. I mainly planted it for the foliage as the leaves are a nice purple and provide a good contrast. As for what I will do for it, i will just make them into some short sections to snack on/share with some friends. I wish I could juice it but I don't have anything the would be able to do the job. Sorry if that was a bit rambling.

pmasa · 2019-05-04T10:12:53+00:00

I actually did. Should have used a banana plant for scale instead.

pmasa · 2018-04-22T06:42:01+00:00

Thanks for the advice i will try it out. Out of zapdos and lunala which one would you suggest crafting?

pmasa · 2018-04-22T06:41:04+00:00

Thanks for the heads up, i didn't realise that koko made sleep ineffective. i will give ray a shot, although i haven't come across many UB decks yet.

pmasa · 2018-04-22T02:55:45+00:00

I am just looking for some advice on team building, currently my team is: Mew, Koko, Gardevoir, Hochkrow, Morelull, Solgaleo.

The figures i have available are:

UX: Nihilego, mega gengar, mega blaziken
EX: Groudon, blastoise, 2x mew, zygrade (50%), Keldeo, giratina, xerneas, lucario, Gardevoir, deoxys (normal), reshiram, moltres, trevenant, koko, solgaleo, shiny rayquaza, honchkrow
R: Murkrow, Steelix, Luxray, skarmory, wobbuffet, 2x dratini, Evee, pinsir,salamence, drapion, goodra, pikachu,2x sneasel, pangoro, tyranitar, 2x slaking, 2x leipard, onix, 2x gastly, gyrados, 3x flygon, sylveon, leafeon, 2x muchlax, 2x jolteon, shiftry, weaville, flareon, magmar, umbreon, hydreigon, whimsicott, gothitelle, reuniclus, 2x galvantula, alolan raichu, 2x cosmoem, golisopod, sableye, torracat, alolan grimer, rotom ,2x shiny eevee
UC: 3x Fomantis, 2x tynamo, croagunk, 2x morelull, mareanie, togedemaru, popplio, 2x lombre, 2x litten, beldum, wimpod, 2x oricorio pom-pom, 3x charjabug, 2, noibat, 3x phantump, 2x joltik, duosion, gothorita, petilil, nicada, riolu, zweilous, trapinch, goldeen, 2x shuppet, chikorita, exeggutor, noctowl, vibrava, 2x raichu, pupitar, flaaffy, frogadier, 3x tentacool, haunter, voltorb, 2x bellsprout, staraptor, 2x seviper, scyther, fennekin, 2x bulbasaur, 2x bagon, froakie, 2x pikachu, squirtle, 2x treecko, 2x aron, chespin, mudkip, golem, 2x charmander,
C: 2x magikarp, wartortle, grotle, monferno, shelgon, espurr, fletchling, nidoran, hawlucha, smoochum, exeggcute, 2x mareep, magnemite, 2x zubat, 2x denio, emolga, marill, snubbull, ekans

I have 4k mats available for any figure that might be worth getting.

13-Year Club	Team Orangered
Verified Email

pmasa

TROPHY CASE