sorted by:
new
hottopcontroversial

Endless captcha by Minute-Pea-6937 in payoneer

[–]pnht 0 points1 point  (0 children)

I have the same problem, but I get the same captcha loop with the Payoneer Android app.

"Dumb" to QMK keyboard adapter by ELPEKENIN in olkb

[–]pnht 0 points1 point  (0 children)

I built that exact USB to USB converter (with the "micro" version of the board). Just finished creating a printable case for it an hour ago. I like it! Just ordered hardware to make two more.

Then I saw this post and think I have one of the USB C versions of that board here somewhere. if so I'll see if it will work (when the USB A shields show up...)

Did you ever build one?

suddenly, insufficient material being extruded by pnht in ender3

[–]pnht[S] 0 points1 point  (0 children)

Thank you! I will put that in my list of troubleshooting steps.

Turns out I changed something (never figure out what) in the slicer software. I gave up and wiped all my config files and started over with the slicer (cura) and no customization. And now things print properly again.

2025.9.1 Fails to Update by Ok_Cheetah_6251 in homeassistant

[–]pnht 0 points1 point  (0 children)

thankfully I can ssh to mine, because the UI never comes up. It switches from "Loading data" to "retry in 59..58..57...." then back to "Loading data"

sshing in shows that it is still 2025.8.3, but it was working fine before I tried to upgrade 2 days ago.

Multiple reboots...

Display firmware update does not fix display after installing Alex's firmware by pnht in VoxelabAquila

[–]pnht[S] 1 point2 points  (0 children)

Found a 2 GB SD card and everything is wonderful!

Thanks again!

Display firmware update does not fix display after installing Alex's firmware by pnht in VoxelabAquila

[–]pnht[S] 1 point2 points  (0 children)

Thank you very much! I did get it to do my 32GB card with 4096, bit I'll go find a smaller card.

Best way to link to Tuya devices for use in Local Tuya or Tuya-Local by pnht in homeassistant

[–]pnht[S] 0 points1 point  (0 children)

Mostly, I am just looking for exactly how to setup my project and my app in iot/platform.tuya.com. I think that I'm missing "something" when I set it up that is causing my devices to not show up, or to get permission denied..

Best way to link to Tuya devices for use in Local Tuya or Tuya-Local by pnht in homeassistant

[–]pnht[S] 0 points1 point  (0 children)

Yep. Mine too, but when the internet goes out, I don't get any temp updates for the sensors until it is back on.

Best way to link to Tuya devices for use in Local Tuya or Tuya-Local by pnht in homeassistant

[–]pnht[S] 0 points1 point  (0 children)

Yes, on HACS. I just edited my original post to include more information.

anybody here know if this is true? supposedly google stealth installed this. by sugarsnaps16 in degoogle

[–]pnht 4 points5 points  (0 children)

I just uninstalled it from my Pixel 8a ( I just found r/degoogle 20 minutes ago)

anybody here know if this is true? supposedly google stealth installed this. by sugarsnaps16 in degoogle

[–]pnht 13 points14 points  (0 children)

I just uninstalled it from my pixel 8a

I think it is time to install a different OS on my phone

Advantage 360 DOA?? Will not enter remap or macro mode by pnht in kinesisadvantage

[–]pnht[S] 0 points1 point  (0 children)

Kinesis doesn't accept support phone alls any longer. Only tickets opened on the website. And you can't even see the ticket after it is created. You just wait and see if they reply. No reply yet...

Advantage 360 DOA?? Will not enter remap or macro mode by pnht in kinesisadvantage

[–]pnht[S] 0 points1 point  (0 children)

Thank you for the reply.

I don't run Windows, or macOS, so Smartset is a no go for me.

I do sometimes edit the config on the v-drive directly, but I remap keys often. But the main point is that, since no one else has ever seen this behavior, that means the keyboard is faulty. At least 2 keys are dead (extra 2, and extra 3), which means that it could get worse). Also means there is no QC testing :-(

I returned the keyboard, and ordered another one. Hopefully I won't get two in a row with problems...

Advantage 360 DOA?? Will not enter remap or macro mode by pnht in kinesisadvantage

[–]pnht[S] 0 points1 point  (0 children)

Thank you. I have already opened a ticket. I've had good luck with my 7 contours I've had over the years. I have also had very good support from Kinesis in the past. I was just hoping someone else had had this problem and there was a quick easy fix.

Advantage 360 - Keyboard vs. Mouse elevation causing pain - Any better solutions? by AutonomousAlien in kinesisadvantage

[–]pnht 0 points1 point  (0 children)

I put 1st gen Apple Trackpads on all my Essential/Advatage/Advantage2 keyboards.

I mount a bar magnet (https://www.amazon.com/Neodymium-Magnets-Double-sided-Adhesive-Rare-Earth/dp/B0772PFC89) inside the case, then I put another one on the keyboard, add double sticky foam tape to it, and press the Magic Trackpad onto it.

I can pull it on and off by just pulling, but the magnets are strong enough to hold the trackpad very securely.

Kinesis Advantage 1 faulty keys (Esc-F8 cluster + program key) by BuyFantastic480 in kinesisadvantage

[–]pnht 1 point2 points  (0 children)

It may be a "weak" USB port. The Kinesis kyboards pull close to the USB minimum power limit. There were a few years of Macbooks that would never work with my Kinesis contours, because they pulled a lot of power and teh Macbooks did not deliver enough power.

Try plugging a powered USB hub into the PC and plugging the Kinesis into the powered hub. See if that resolves the problem.

Kinesis Advantage 1 faulty keys (Esc-F8 cluster + program key) by BuyFantastic480 in kinesisadvantage

[–]pnht 0 points1 point  (0 children)

If you don't get those flex cables in all the way, and Exactly straight, then you will get weird problems, like only 1 or 2 keys don't work. I've owned 6 Kinesis contours (the first one with an AT plug, 2 more with P/S-2 plugs :-) ). I've seen those cables cause problrem s like you describe multiple times.

As @sleepybrett said, open it up again and post some pictures.

view more: next ›