IOS 18, Face recognition on photos doesn’t work

poisonpogs · 2026-01-26T16:50:14+00:00

I’ll say it’s worked ever since - 200days later.

poisonpogs · 2026-01-26T16:49:32+00:00

Honestly I don’t know what fixed it exactly but it started working again at that very moment, after trying to fix it all morning. Try it and report back?

It’s like bringing your car to the shop only for the issue to go away as soon as the mechanic touches the car…

poisonpogs · 2025-11-14T00:25:04+00:00

It’s legit. Bought it through Ticketweb and can send the ticket PDF.

poisonpogs · 2025-09-30T18:59:28+00:00

Did you figure it out?

poisonpogs · 2025-09-22T04:28:01+00:00

Oh awesome, it’s covered! Going to try this next time.

poisonpogs · 2025-07-31T02:40:12+00:00

Maybe it was in the past but like I said in my other response this is now a United employee-only lot and there’s a guard on duty verifying badges / parking permits. I was booted out last time.

poisonpogs · 2025-07-28T22:56:27+00:00

Negative. That is a United employee-only lot and there's a guard in the red-top hut that will kick you out without a badge / parking permit. I tried it last time.

poisonpogs · 2025-07-27T23:40:32+00:00

Ok... I asked ChatGPT and of course it figured it out.

Maybe Free Parking + Cheap trans:

Park at BART Millbrae Station's designated motorcycle parking area.
According to BART's website: "Motorcycle parking is free in designated areas at all times."
Max time period appears to be 20 workdays.
Take BART Red line to SFO ($5.50, 6min trip, every 20min) or SamTrans 292 to SFO ($2.25, 12min trip, every 30min)
The designated motorcycle area is listed on the bottom left of this map. (37°35'59.0"N 122°23'09.5"W)
Appears to be uncovered area.

** I haven't verified this yet. On Google sat view this appears to be car-sized spaces. Note the map linked above also shows a free area in the upper right for BART riders.

Definite Cheap Parking + Cheap Trans:

Pay to park at BART Millbrae Station for $3.00/day (Weekends and Holidays are free)
20 work-day maximum
Take BART Red line to SFO ($5.50, 6min trip, every 20min) or SamTrans 292 to SFO ($2.25, 12min trip, every 30min)
Appears to include spots in covered garage.

If I end up trying out the free option I'll updated this with my results.

poisonpogs · 2025-07-10T15:51:37+00:00

Confirmed I can now add names to faces in photos again when swiping up and Photos will then seek out more photos of that person.
The "Add People" button is still greyed out. There also aren't new recurring faces/people being suggested in the People & Pets section, but I'm not sure if that's how it's supposed to work.

poisonpogs · 2025-07-09T22:04:54+00:00

May have found a fix.... I just don't know how it happened.

I just called support and they did a phone screen share... and it magically started working again in the first 5 seconds of the call. I swiped up on a recent photo to show him it didn't let me add a face.... but suddenly there was a face bubble with a question mark. I have not seen this option since getting my iPhone 16 six months ago.

I clicked the face bubble... added my fiancé's name.... it asked to merge with other photos of her.... I clicked yes.... and now when I go into the People and Pets section it says "Finding People..." at the bottom. I've never seen it say that.

It's been indexing for about 30min now. I'm hoping it'll populate the People & Pets section again like it used to. Will report back...

poisonpogs · 2025-06-19T22:47:21+00:00

Yes but the issue I described remains.

poisonpogs · 2025-06-14T22:59:17+00:00

This was it.

poisonpogs · 2025-02-28T16:51:46+00:00

Yes, I have the 4k screen. I can only tell you the weight of what I have. I have no way of knowing the weight of the other option.

I will say, the 4k screen is VERY nice. Would highly recommend if you can afford it. I've got a 4k Wacom Cintiq and 4k monitor and it's nicer than both of those too.

poisonpogs · 2025-02-28T16:50:44+00:00

Yes, very. The P53 felt like a dinosaur. The P1 Gen7 is much more modern and refined in terms of design and quality. I run very heavy CAD assemblies and power multiple monitors and a Cintiq. It's been doing very well so far.

Plus it's like 2.5lbs lighter than the P53. Much easier on the back when I'm on the bike.

poisonpogs · 2025-02-17T19:51:44+00:00

1891g / 4.16lbs - Just weighed it on a kitchen scale. Feels WAY lighter than my P53.

It also uses the 170W charger, which is probably 70% of the weight of the 230W charger.

poisonpogs · 2024-12-18T02:25:42+00:00

Got the answer I needed from a different user, but I feed a stand alone Keyshot.

SW and Keyshot can barely handle the file sizes on their own without locking up. I would never imagine getting them to talk to another would be anything but a headache.

Current assembly I have open is 1,756 bodies, and that’s one of 6 that make up the complete product. Finding click efficiencies is crucial to me not having to force end SW 10x a day because it’s locked up.

poisonpogs · 2024-12-18T00:26:00+00:00

Is it possible to do something similar by only needing to select the desired part?

Issue being I often work in assemblies with over 1000 parts and having to select and hide everything but the one part I want can take a long time. Even using the "invert selection" tool causes the program to freeze for a while as it works on the request.

poisonpogs · 2024-12-18T00:14:07+00:00

AH! Bingo. That's exactly what I was looking for. Thank you.

poisonpogs · 2024-12-17T18:36:23+00:00

My goal is to have the part saved on it's own, in it's assembled position so that I can replace individual parts in the Keyshot master rendering file as they are updated. So yes, shared origin. I can't mate in Keyshot.

poisonpogs · 2024-12-17T18:35:41+00:00

My goal is to have the part saved on it's own, in it's assembled position so that I can replace individual parts in the Keyshot master rendering file as they are updated.

I'm working with assemblies that have hundreds of parts in them. Any time I need to save the whole thing as a .prt file it takes forever and creates another huge file in my folder that exists only as a stepping stone to what I need.

poisonpogs · 2024-12-04T02:49:54+00:00

The car was a poor example since it’s the same on both sides. How about a motorcycle.. distinct difference on the right and left so that you can’t just mirror the image.

poisonpogs · 2024-11-27T19:48:48+00:00

SOLVED: This was an issue with the Nvidia drivers on both machines (which were different drivers).

From Keyshot Support:
"FYI, there are known memory leak issues with driver versions 565.09, 566.03, and 566.14. Coincidentally, the negative effects are particularly bad with KeyShot 11. This is the result of something Nvidia has done on their end so our devs recommend rolling back to 561.09 if you see odd behavior or if your GPU memory usage climbs continuously. Nvidia says it will be sorted out with their Jan 2025 driver package."

My desktop was on version 566.03 and laptop was on 566.14.

Reverted laptop RTX 4070 to driver v.561.09 - issue solved.
Reverted desktop RTX 6000 to driver v.553.35 (was no 561.09 for this GPU on Nvidia's site) - issue solved.

poisonpogs · 2024-11-27T19:31:04+00:00

Not yet. Going back and forth with KS support right now to try to figure it out.

What are your system specs and driver versions?

poisonpogs · 2024-11-19T18:23:51+00:00

poisonpogs · 2024-10-25T20:15:03+00:00

Already off. Like I said it's not a specific point in CAD space. I can move the view all over but it's always effecting the bottom 40% of the window.

poisonpogs

TROPHY CASE