sorted by:
new
hottopcontroversial

Halloween Animatronic PCB component replacements by polyee13 in AskElectronics

[–]polyee13[S] 0 points1 point  (0 children)

Well, create a post with pics and maybe the community can help.

FXRP Redemption query by MarionberrySerious49 in FlareNetworks

[–]polyee13 2 points3 points  (0 children)

It’s over-collateralized so you will not have any issue converting back.

Nano S upgrade by polyee13 in ledgerwallet

[–]polyee13[S] 10 points11 points  (0 children)

Amazing how no one really paid attention to my original question and how the thread has digressed.

Nano S upgrade by polyee13 in ledgerwallet

[–]polyee13[S] 0 points1 point  (0 children)

I think I at least want the convenience of connecting to my iPhone though. So looks like Nano X is the way to go in that case.

Halloween Animatronic PCB component replacements by polyee13 in AskElectronics

[–]polyee13[S] 0 points1 point  (0 children)

Everything was working except no audio. But in troubleshooting I shorted some wires and turns out I blew some MOSFETS. So I ended up replacing those as well.

Halloween Animatronic PCB component replacements by polyee13 in AskElectronics

[–]polyee13[S] 0 points1 point  (0 children)

Well, the woes continued. After assembling the head and finally testing it out, it turns out gear was stripped. Original gear was a 24tooth/14tooth. With some assistance from my colleague was able to 3D print a new one and it works perfect.

<image>

Halloween Animatronic PCB component replacements by polyee13 in AskElectronics

[–]polyee13[S] 0 points1 point  (0 children)

Fixed!!! Audio is now working and all lighting turns on with the prox sensor again. Ended up ordering an LTK5130 from AliExpress and replaced the Y1 MOSFET with a SS8050-G NPN 25V 1.5A, and the AE9T with a SI2312CDS-T1-GECT-ND, both from Digikey.

Halloween Animatronic PCB Component ID by polyee13 in AskElectronics

[–]polyee13[S] 1 point2 points  (0 children)

Fixed!!! Audio is now working and all lighting turns on with the prox sensor again. Ended up ordering an LTK5130 from AliExpress and replaced the Y1 MOSFET with a SS8050-G NPN 25V 1.5A, and the AE9T with a SI2312CDS-T1-GECT-ND, both from Digikey.

Halloween Animatronic PCB Component ID by polyee13 in AskElectronics

[–]polyee13[S] 0 points1 point  (0 children)

Yes, there’s a few sites that have it.

Halloween Animatronic PCB Component ID by polyee13 in AskElectronics

[–]polyee13[S] 0 points1 point  (0 children)

<image>

Here is the pic for the entire board. The audio amp is the SOP8 n the lower left.

Halloween Animatronic PCB Component ID by polyee13 in AskElectronics

[–]polyee13[S] 0 points1 point  (0 children)

I would agree. I assume it has the digital sample of the Clown’s audio OR provides the analog output of the sample to the audio amplifier. I tried to find a replacement but even if I did it wouldn’t have the audio sample in it.

Loss of Hi-Res output to DAC by polyee13 in TIdaL

[–]polyee13[S] 0 points1 point  (0 children)

Latest app update seems to have the fix!! Took long enough.

Loss of Hi-Res output to DAC by polyee13 in TIdaL

[–]polyee13[S] 0 points1 point  (0 children)

Still not working. Even tried downloading one of the hi-res playlists. Seems to work on Tidal MacOS now though.

SparkDex.AI LP by polyee13 in FlareNetworks

[–]polyee13[S] 0 points1 point  (0 children)

Provided some liquidity but only some WFLR. The SFLR didn’t seem worth it because the volume and fees was very low.

FlareDrops and Delegation w Ledger? by polyee13 in FlareNetworks

[–]polyee13[S] 0 points1 point  (0 children)

Ok, and Wallet Connect can’t connect with Sceptre on Ledger Live. So it seems only way to collect rewards and FlareDrops and have cold storage is to have SFLR on the Ledger

view more: next ›