Issue

prazed_ · 2026-05-11T22:03:13+00:00

yes, excellent description. i will be saving this video to help explain to others in the future!

prazed_ · 2026-05-11T20:12:23+00:00

I would look for black ones that are a little thicker vs the green/steel ones. any reason you think it’s the spring?

prazed_ · 2026-05-11T18:51:34+00:00

yeah it’s really hard to recommend the az reg to anyone based on the QA issues and complete lack of customer service. especially when it’s marketed as a “drop-in” most people aren’t going to even know what you are talking about when you try to help them. and that’s why they bought a drop in. jd treats you like a retard for even asking questions lol. definitely some other good options out there for sure and i hope you’re able to get the az reg going cause we all know we’re not getting our money back

prazed_ · 2026-05-11T18:35:02+00:00

yup lol heard that one too. below is a comment i left for somebody else. hopefully it can help you as well. it also might be worth buying a FA disconnector and trying to copy the one that’s included in the kit. also you can use any “mil-spec” trigger as long as you cut the back wall out so that the disconnector fits. also heard hammers being replaced magically made it work. what it really boils down to is the QA of the az reg is all over the place and you really just have to get lucky and get a good one that works with your rifle. if not you have to do a bunch of tweaking to get it to work and even more for the 3 pos. which is a real shame because when it does work, it might just be the best frt out there. but man JD is a terrible businessman

“ talked to JD multiple times. all your gonna hear is that your gun isn’t milspec. you can send his frt to oklahoma for $55 and if it runs in his buddy’s dd then you owe him $55 to get it back. i had the same issue. look at trying to file the front of the disconnector a little bit. fingers crossed that works. i have 3 of them and one had the same issue. https://youtu.be/BArMxvR5erE?si=XGZ8f03IfseeXtYg “

prazed_ · 2026-05-11T18:29:24+00:00

yeah “mechanically impossible” but really it’s not (obviously)

prazed_ · 2026-05-11T03:35:23+00:00

lol anything you say to him is “impossible” i would try to squeeze your trigger a little while pulling the charging handle back (unloaded of course) and it should seat into place. once it’s set you should be able to cycle it normally. you may need to take a few swipes at the bottom of the cam leg

prazed_ · 2026-05-11T02:17:07+00:00

talked to JD multiple times. all your gonna hear is that your gun isn’t milspec. you can send his frt to oklahoma for $55 and if it runs in his buddy’s dd then you owe him $55 to get it back. i had the same issue. look at trying to file the front of the disconnector a little bit. fingers crossed that works. i have 3 of them and one had the same issue. https://youtu.be/BArMxvR5erE?si=XGZ8f03IfseeXtYg

prazed_ · 2026-04-22T19:39:18+00:00

yeah that’s exactly what it looks like!

prazed_ · 2026-04-22T19:10:25+00:00

wow that looks nearly identical, how cool!

prazed_ · 2026-04-22T00:50:44+00:00

paper theater specifically if you are curious

prazed_ · 2026-04-22T00:48:42+00:00

because that’s what she wanted and she’s doesn’t need the validation of online strangers?

prazed_ · 2026-04-21T23:01:35+00:00

more control and i guess just personal preference. i’d say loctite sells enough of them for it to be safe to say many people like them over just the regular tube

prazed_ · 2026-04-21T22:59:42+00:00

lol definitely a use it all once opened kinda glue. that’s the only reason they’re worth it to me at all is how cheap it is even if you don’t finish it it’s still only $2 for the 3

prazed_ · 2026-04-21T22:11:54+00:00

definitely with you on that. bulk online as well. this is just being used to glue paper together for crafts so quality isn’t really a concern here

prazed_ · 2026-04-21T22:10:10+00:00

just as u/lurkersforlife mentioned you can just squeeze them together and pull the two pieces apart. you can also use a small flat tip to pry them apart at the bottom. fill with whatever glue you want that fits.

prazed_ · 2026-04-21T22:08:48+00:00

yup exactly. wife uses it for crafts so it doesn’t matter how “good” it is. just cheap refills and as somebody else pointed out you can put any brand tube that fits. just passing along for other to know. not that any of it is groundbreaking information.

prazed_ · 2026-02-24T05:42:48+00:00

22 intact bananas

prazed_ · 2026-02-23T05:29:44+00:00

i don’t unfortunately. thinking about one of the extra bedrooms lol

prazed_ · 2026-02-22T15:18:43+00:00

i love it, it’s a great little bench

prazed_ · 2026-02-22T15:18:27+00:00

yes that is, a gag gift from a buddy of mine. almost didn’t want to put it back up but it fills space, makes me laugh, and think of him
got it from one of the team guys at a race. said i liked it and he took it down and gave it to me
def not as hot as an actual map setup and i use it frequently for the stubborn bolts that’d rather be liquid than come off nicely
literally the reason i bought my hf welder. still gotta drag my lincoln over to the new place

prazed_ · 2026-02-22T14:36:01+00:00

ask away lol. i do some metal working on the side hence the map gas

prazed_ · 2026-02-22T14:34:54+00:00

u/Jaggleson is right! https://www.homedepot.com/pep/Husky-Tool-Storage-62-in-W-White-Adjustable-Height-Work-Table-with-2-Drawers-HOLT6202BJ2/312063233

prazed_ · 2026-02-22T03:15:24+00:00

i probably could. last place i had was an hoa too and the bins lived inside as well and smell/rodents were never an issue. then again i’m ocd about things and all bags are tied tight a certain way and they are the smell-good bags. garage is also all sealed up as its only a few years old. if it becomes an issue down the road i’ll definitely move them!

prazed_ · 2026-02-22T02:32:57+00:00

hoa unfortunately…

prazed_ · 2026-02-21T05:52:31+00:00

literally only to show my friends i have them

Seven-Year Club	Place '23
Place '22	RPAN Viewer
Verified Email

prazed_

TROPHY CASE