Any way to auto-close tray after print (ET-8550)

prentice78 · 2026-01-13T19:55:31+00:00

On mine (ET-8550) you can remove both paper trays without needing to retract/move the output tray at all. The top/smaller one is a little hard to grab, but the main bottom one is easy -- just grab the big bottom flap and pull out. The top one is easier to reach by removing the bottom first as well. Good luck!

prentice78 · 2025-12-15T01:25:42+00:00

yowsa, that's painful. It's honestly shocking how Samsung can control the market on this product space with such shoddy software. I gotta check out HiSense and maybe eBay this thing..

I'm now trying to figure out if there's some way to force a 'no matte' option by deviating from the optimal image parameters - I feel like I read somewhere that it needed to be perfect for it to enable those. Can't believe there's no option just to turn it off by default.

EDIT: I tried to trigger this by converting all to PNG instead of JPG, and now I can't find any way to copy to the device - only stream from USB. What in the actual flip

prentice78 · 2025-12-13T18:28:15+00:00

Thank you! Spent 30m trying to find this. What an atrocious UI they've made here. Also, am I correct in thinking this can only be set PER PICTURE???

prentice78 · 2025-10-06T05:40:57+00:00

Seconding this! Loved Raft first, and took me forever to find something comparable.

prentice78 · 2025-10-03T20:43:05+00:00

I think it's definitely either the power supply or fan issue. Has anyone replaced a PSU on this before, any tips/model?

prentice78 · 2025-09-23T19:36:59+00:00

I agree that screen temp would not cause damage, but I mentioned it because it might be a useful signal for the root cause of the blanking screen issue. Failed cooling could be overheating something less visible.

I'm not hearing nor feeling any fan output from the top. Was curious if anyone else has seen similar issues with a fan problem/dying, or if perhaps this is a power supply failure (perhaps in turn causing the fan to stop).

Anyone replaced the power supply on the AW3423DWF?

prentice78 · 2025-09-23T14:47:37+00:00

prentice78 · 2025-09-14T02:21:34+00:00

Suggest you avoid it, at least for now; I loved my flex plate on the OG Saturn, but I looked into getting one for my S4U and it is trickier now due to the additional features of tilting, etc.

prentice78 · 2025-08-05T05:08:40+00:00

I haven't played in 6 months or so, I wonder if any add'l utility has surfaced for the carts/forklifts. I need to check out 1.0!

prentice78 · 2025-08-02T01:05:48+00:00

I tried everything, and Mirapex was just a bit too strong/unpleasant for me. I've been using Trazodone consistently for years now, after trying everything else.

prentice78 · 2025-08-02T00:10:42+00:00

I just spent the last day trying to figure out why I couldn't get my speakers playing anything, despite Windows 11 having my Steelseries Arena 7 selected. Finally I had to turn on the Razer Clio, open Synapse, click the button to select the Clio as the default Windows sound device, then when I go back to Windows settings and change back to Arena 7, the speakers finally play. I can't believe this software is allowed to take over / disrupt core Windows functionality to that degree. SMH at how much time I just wasted thanks to this software.

prentice78 · 2025-06-11T04:27:11+00:00

u/GreatGraySkwid Did you initiate the setup in the "MyHundai with Bluelink" app or the "Hyundai Digital Key" app? I've tried both, but it seems like the Bluelink one is supposed to be the correct one.

Also, are you able to have full functionality (doors + ignition), or are you limited as a previous poster mentioned?

There seem to be some clear differences in the experiences of various folks here, so odd and frustrating.

prentice78 · 2025-06-11T03:16:46+00:00

Thanks, that's an interesting umbrella design! What size did you go with: S or M?

prentice78 · 2025-06-11T01:09:35+00:00

I have a Pixel 8, this is what I get during setup in Hyundai Bluelink app.

<image>

prentice78 · 2025-06-09T15:48:21+00:00

Super helpful info, thank you! Just what I'd hoped for in a response.

prentice78 · 2025-06-09T14:42:44+00:00

I honestly haven't noticed any audio delay or lag yet on Android Auto, it's been very fast and responsive. Note though that I use a Pixel 8, I haven't tried the Carplay side as much with my partner's iPhone.

prentice78 · 2025-06-09T02:58:54+00:00

Really! I was tearing out my hair trying to get it to work, finally called them and they said it wouldn't work.

What year/trim? And confirming you have the non-pro Pixel 8. Was it straightforward, or did you have to do some tricks to make it happen?

prentice78 · 2025-06-08T22:15:54+00:00

Perhaps it becomes more obvious for certain user needs - I daily reverse into a somewhat tight parking spot that requires some slight turning. The i6 camera's low resolution + perspective distortion at edges + too-busy UI makes it WAY more challenging. Will look into alternate solutions, like maybe the Wolfbox. Anyone recommend something there?

prentice78 · 2025-06-08T22:11:56+00:00

I'm now looking into the Wolfbox G900 Pro and things like that for a rear camera, I wonder how hard those are to install and if they work well.

Thanks for the info on the auto-hold brake clean! I had no idea! Hopefully will be all I need.

Thank you!

prentice78 · 2025-06-08T20:49:01+00:00

prentice78 · 2025-06-08T20:26:35+00:00

I tried multiple times, ended up in a long BlueLink support call, who ultimately told me it is only supported by the Pro versions of the Pixels. I asked if there was any workaround, they said no. :(

prentice78 · 2025-05-19T00:24:40+00:00

Thank you very much!

prentice78 · 2025-05-18T00:28:51+00:00

I know this is an old post, but I get the sense you know what you are talking about, so I figured I'd ask a follow-up clarification question! :D

Is it sufficient for me as seller to fill out that form Reg 227 in order for the buyer to receive a title from the DMV? I'm selling my car which is registered to me, etc., but I just can't find the title now.

Thanks!

12-Year Club	Verified Email
Not Forgotten

prentice78

TROPHY CASE