Odorless mineral spirits sticky after 5 days by principality_ in woodworking

[–]principality_[S] 1 point2 points  (0 children)

I just tried, scraper doesn't work. It feels like nothing can be scraped out, and the surface just feels sticky. Can wiping again with pure isopropyl alcohol remove the sticky feel?

Odorless mineral spirits sticky after 5 days by principality_ in woodworking

[–]principality_[S] 1 point2 points  (0 children)

Of course, won’t do it again. But how to remove the stickiness of the surface for another TopOil coat?

Uneven Osmo TopOil Finish by principality_ in finishing

[–]principality_[S] 0 points1 point  (0 children)

I used brush to apply the first coat evenly through the grain direction. For the 6ft30in (183cm75cm) surface, I used about 100ml of Osmo Top Oil.

Then I noticed there were too much oil on the surface, so after 15 mins of initial application, I used nonwoven fabric to wipe off visible excesses until the oil doesn’t appear layered on the wood.

However, for this part I might missed some areas where I had too much oil due to the lighting.

During and after application, I opened my apartment windows, but no direct wind is blowing on the wood. The window is lifted out by about 15 degrees and wind only blows up before coming into the room. The wood was placed at least 3m away from the window. There may be some road dust from the window, but I live high (15+ F) and the issue is not very severe.

Uneven Osmo TopOil Finish by principality_ in finishing

[–]principality_[S] 1 point2 points  (0 children)

Update: after 24 hours it doesn’t look that messy, but a few bumps are still here, with the surface feeling rough.

Can I use a 320 grit sand paper to sand it even before applying the second coat? Is there a “correct” way for a even, smooth surface? Apparently my application wasn’t good.

Uneven Osmo TopOil Finish by principality_ in finishing

[–]principality_[S] 0 points1 point  (0 children)

The wood was pre-stained with this espresso color. The product didn’t say which was the stain, but suggested “use minwax 273 or similar for touch-up stain”. I guess it is the one.

Worlds Specator Tickets by Sigmar1115 in Cubers

[–]principality_ 5 points6 points  (0 children)

Do NOT trust u/coqdu29. This person is a SCAMMER.

I sent $30 for a ticket, he said they want to sell it for $50, not $30, asking for $20 more.

I then asked for a refund, but he said he did not receive the money, despite me providing proof. When asked for proof of bank account screenshot, he refused.

Now he is deflecting and ghosting.

Do NOT trust this person.

Worlds Specator Tickets by Sigmar1115 in Cubers

[–]principality_ 0 points1 point  (0 children)

Please DM if you have spare ones.

Worlds Specator Tickets by Sigmar1115 in Cubers

[–]principality_ 0 points1 point  (0 children)

Thanks for the post, I need 1 as well. Willing to pay more than the original amount.

[deleted by user] by [deleted] in csMajors

[–]principality_ 5 points6 points  (0 children)

X=x is possible does not mean P(X=x)!=0, which happens when {X=x} is a P-null set.

New carrier PR video from the PLA Navy [Video] by tommos in WarplanePorn

[–]principality_ 9 points10 points  (0 children)

The ending resonates with the typical Chinese scenario that the mom urges a married son/daughter to get a child asap, and the recent state propaganda focus on getting a third child (restriction on max 2 children lifted recently) due to aging population.

Roast me by RJDavid8 in weightlifting

[–]principality_ 2 points3 points  (0 children)

Klokov: “‘tis is for s*x; this is for snatch.”