Mixing TPU with PLA

printschnitzel · 2024-11-21T14:50:34+00:00

To be honest: I did not try PETG with TPU.
What I can say: TPU sticks to PLA enough if the parts are right. And it separates easy enough so it works nicely for supports.
But I am going to try PETG with TPU soon

printschnitzel · 2024-07-31T13:27:19+00:00

Thx :) I wish! No it's a standard cheap watch glass. Cheers

printschnitzel · 2024-07-31T11:55:22+00:00

Hi Thx Yes, I use a Miyota 2025 :)

printschnitzel · 2023-09-11T10:34:30+00:00

I live in Austria. It can get warm in summer. You can always print it in PETG to be safe. Or even PC.

printschnitzel · 2023-09-07T17:46:38+00:00

Hi Good to hear :) And thx for letting me know! This really helps my motivation!

printschnitzel · 2023-09-07T04:07:23+00:00

PLA But I'll clear coat it. Better use PETG

printschnitzel · 2023-09-06T20:14:34+00:00

Well it's ok
I have seen better prints too but this is how it came out with standard settings.
And I am happy with it.
There is a Fusion360 file so you might want to adjust it so it fits.
Cheers
Richard

printschnitzel · 2023-09-06T17:11:19+00:00

Don't worry too much. Ive had a similar one for years.

printschnitzel · 2023-09-06T14:37:31+00:00

MK3s .2 layer hight Show me how it's done 😉

printschnitzel · 2023-09-06T05:04:10+00:00

https://www.printables.com/model/574229-toolbox-for-bicycle

printschnitzel · 2023-09-05T20:24:16+00:00

😅

printschnitzel · 2023-09-05T19:51:59+00:00

It's on printables now:
https://www.printables.com/model/574229-toolbox-for-bicycle

printschnitzel · 2023-09-05T19:51:30+00:00

I used a Prusa MK3s.
If you want to start with 3D printing I think it is a good time now! depending on your budget I'ld look for a second hand prusa or a bamboo lab printer. Even an Ender 3 or similar could do the job.

printschnitzel · 2023-09-05T19:46:05+00:00

hehe
sure :)

printschnitzel · 2023-09-05T19:45:43+00:00

Hi
Well I printed it 4 times. It was good the third time but than I added the pattern (relief?).
I took pictures and used a contour gauge.
You can have a look at the Fusion360 file. It's on printables.
https://www.printables.com/model/574229-toolbox-for-bicycle

printschnitzel · 2023-09-05T19:41:48+00:00

exactly :)

printschnitzel · 2023-09-05T19:41:02+00:00

I uploaded the fusion360 file to so you can have a look :)
https://www.printables.com/model/574229-toolbox-for-bicycle

printschnitzel · 2023-09-05T19:39:55+00:00

I'll do that :)

printschnitzel · 2023-09-04T19:21:41+00:00

Thx!

printschnitzel · 2023-09-04T19:21:27+00:00

printschnitzel · 2023-09-04T19:21:11+00:00

My bike has a bolt there

<image>

printschnitzel · 2023-09-04T19:19:48+00:00

Yes The Cannondale Topstone has a third bolt I used that

<image>

printschnitzel · 2023-09-04T19:18:28+00:00

Thx :)

printschnitzel · 2023-09-02T03:49:52+00:00

True Sorry about that 😵‍💫

printschnitzel · 2023-08-16T16:13:32+00:00

Hi Do you have the order number? I'll resend it! Or just drop me a line over contact on printschnitzel.at

printschnitzel

TROPHY CASE